Also known as Type II safety cans, these have two openings—one for filling, one for pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; flame arrester; and a vacuum-release valve for controlled pouring.

Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.

Style B have a steel roll bar that protects the spout, handle, and trigger during transport.

Style C have a rotating spout that flips down for pouring and up for storage.

Carry and store petroleum-based liquids in these sturdy cans. Color-coding indicates usage: red for gasoline, yellow for diesel, and blue for kerosene. The spout automatically closes to prevent spills. Push the button to pour.

To create a convenient dispensing station, pair this stand with a round, 5-gallon safety can (not included).

Control the flow while dispensing diesel fuel. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Nozzles with automatic shut-off will stop dispensing when the tank is full or if the nozzle falls from the tank. They have a built-in check valve that reduces spillage when withdrawing the nozzle from tank. Nozzles have an angled design, which reduces hose kinking for efficient fueling. They come with a plastic scuff guard to protect the nozzle from damage.

Nozzles with manual shut-off have a trigger to stop the flow. Do not leave the nozzle unattended when in use.

Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.

Style A is also known as a service-station-style nozzle. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. Attach an optional splash guard (sold separately) to protect your hands from spray.

Styles B and C are also known as truck-stop nozzles. They have higher flow rates than Style A to dispense large quantities of fuel quickly. Style C includes a splash guard to protect your hands from spray.

Style D has the largest spout and the highest flow rate of all the nozzles for use with trucks, buses, and other heavy-duty bulk fueling applications.

Use hold-open clip kits to replace a broken clip. Install with pliers.

For technical drawings and 3-D models, click on a part number.

Adjust the flow while dispensing liquid chemicals. Nozzles are polypropylene, which is lightweight with excellent chemical resistance. They shut off manually.

Style A has a lever to turn flow on and off. It has a higher flow rate and bigger spout than Style B to dispense large quantities of liquid chemicals into drums and tanks quickly.

Style B has a trigger to turn flow on and off. It has an angled design, which reduces hose kinking for efficient fueling. Nozzle has a barbed connection; twist hose onto the barbed end and secure with a clamp. Use to transfer citric acid, nitric acid, phosphoric acid, and sodium hydroxide from pumps and processing equipment.

Warning: Do not leave nozzles unattended when in use.

For technical drawings and 3-D models, click on a part number.

Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC). The nozzles are made of either polypropylene or aluminum and the hose is PVC to resist corroding from citric acid, ethanol, and other chemicals. However, the nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. The nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.

Polypropylene nozzles are lighter in weight than aluminum nozzles and resist corroding from harsher chemicals, such as phosphoric acid.

Aluminum nozzles resist wear and tear better than polypropylene nozzles.

Dispense chemicals from a line that attaches and detaches from your drum or intermediate bulk container (IBC) in seconds. These nozzles and the included hose come with fittings that connect when you insert the plug into the socket and push the levers down. To resist corroding from citric acid, ethanol, and other chemicals, these nozzles are made of either polypropylene or aluminum and the hose is PVC. These nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. These nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.

Polypropylene nozzles are lighter in weight than aluminum nozzles and resist corroding from harsher chemicals, such as phosphoric acid.

Aluminum nozzles resist wear and tear better than polypropylene nozzles.

These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles. Nozzles will shut off automatically when the tank is full or if the nozzle falls from the tank. They have a built-in check valve to reduce spillage when withdrawing the nozzle from tank. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. A plastic scuff guard protects the nozzle from damage. Attach an optional splash guard (sold separately) to protect your hands from spray. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.

Use hold-open clip kits to replace a broken clip. Install with pliers.

For technical drawings and 3-D models, click on a part number.

Nozzles allow you to control the flow while dispensing hydraulic fluid. They shut off manually, so you’ll have to release the trigger to stop the flow. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Style A has a larger spout and a higher flow rate than Style B to dispense large quantities of hydraulic fluid quickly.

Style B is UL listed. It has an angled design, which reduces hose kinking for efficient fueling.

Warning: Do not leave nozzles unattended when in use.

For technical drawings and 3-D models, click on a part number.

Dispense and control the flow of coolant with these nozzles. They have a built-in check valve to reduce spillage when withdrawing the nozzle from the tank. Nozzles shut off manually, so you’ll have to release the trigger to stop the flow. They are brass for good corrosion resistance.

Warning: Do not leave nozzles unattended when in use.

For technical drawings and 3-D models, click on a part number.

To prevent hose from twisting, kinking, and wearing prematurely, these swivels rotate before and after installation as needed. Connect them to the threaded end of your dispensing hose.

Anodized aluminum swivels have good corrosion resistance and are lighter in weight than chrome-plated brass swivels. Chrome-plated brass swivels have comparable corrosion resistance to anodized aluminum swivels, but are softer, so they’re easier to thread together. They have a bright, shiny appearance.

Straight swivels rotate at the female connection point only. They are also known as inline swivels.

45° offset swivels rotate at the male connection point and at the elbow. They are UL listed.

For technical drawings and 3-D models, click on a part number.