For Use With For Use With |
|---|
|
Gasket Material Gasket Material |
|---|
|
TIG Welding Type TIG Welding Type |
|---|
|
For Manufacturer Model Number For ManufacturerModel Number |
|---|
Industry Number Industry Number |
|---|
Gasoline Hose Nozzles
These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles. Nozzles will shut off automatically when the tank is full or if the nozzle falls from the tank. They have a built-in check valve to reduce spillage when withdrawing the nozzle from tank. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. A plastic scuff guard protects the nozzle from damage. Attach an optional splash guard (sold separately) to protect your hands from spray. Nozzles are aluminum, which is lightweight with good corrosion resistance.
Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.
Use hold-open clip kits to replace a broken clip. Install with pliers.
For technical drawings and 3-D models, click on a part number.
Nozzles | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Threaded Swivels | Replacement Hold-Open Clip Kits | |||||||||||||
| Max. Flow Rate, gpm | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Specifications Met | Each | Each | Each | |||
Nozzles | |||||||||||||||
| 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6 1/2" | Aluminum | Automatic, Manual | UL Listed | 0000000 | 000000 | 0000000 | 000000 | 000000 | 00 |
Nozzles with Three-Position Hold-Open Clip | |||||||||||||||
| 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6 1/2" | Aluminum | Automatic, Manual | __ | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
| Optional Red Splash Guard | 0000000 | Each | 00000 |
Diesel-Fuel Hose Nozzles
Control the flow while dispensing diesel fuel. Nozzles are aluminum, which is lightweight with good corrosion resistance.
Nozzles with automatic shut-off will stop dispensing when the tank is full or if the nozzle falls from the tank. They have a built-in check valve that reduces spillage when withdrawing the nozzle from tank. Nozzles have an angled design, which reduces hose kinking for efficient fueling. They come with a plastic scuff guard to protect the nozzle from damage.
Nozzles with manual shut-off have a trigger to stop the flow. Do not leave the nozzle unattended when in use.
Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.
Style A is also known as a service-station-style nozzle. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. Attach an optional splash guard (sold separately) to protect your hands from spray.
Styles B and C are also known as truck-stop nozzles. They have higher flow rates than Style A to dispense large quantities of fuel quickly. Style C includes a splash guard to protect your hands from spray.
Style D has the largest spout and the highest flow rate of all the nozzles for use with trucks, buses, and other heavy-duty bulk fueling applications.
Use hold-open clip kits to replace a broken clip. Install with pliers.
For technical drawings and 3-D models, click on a part number.
Nozzles | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Threaded Swivels | Replacement Hold-Open Clip Kits | ||||||||||||||
| Style | Max. Flow Rate, gpm | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Specifications Met | Each | Each | Each | |||
Nozzles | ||||||||||||||||
| A | 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 15/16" | 6 1/2" | Aluminum | Automatic, Manual | UL Listed | 0000000 | 000000 | 000000 | 00 | 000000 | 00 |
| A | 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 15/16" | 6 1/2" | Aluminum | Automatic, Manual | UL Listed | 0000000 | 00000 | 0000000 | 000000 | 000000 | 00 |
| B | 25 | 1 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 1 1/8" | 6 13/16" | Aluminum | Automatic, Manual | UL Listed | 0000000 | 000000 | 0000000 | 00000 | 000000 | 00 |
Nozzles with Three-Position Hold-Open Clip | ||||||||||||||||
| A | 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 15/16" | 6 1/2" | Aluminum | Automatic, Manual | __ | 0000000 | 00000 | 000000 | 00 | 0000000 | 000000 |
| C | 75 | 1 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 1 3/8" | 7" | Aluminum | Automatic, Manual | UL Listed | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| D | 100 | 1 1/2 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 1 1/2" | 7 7/8" | Aluminum | Manual | __ | 00000000 | 000000 | 000000 | 00 | 000000 | 00 |
Hydraulic Hose Nozzles
Nozzles allow you to control the flow while dispensing hydraulic fluid. They shut off manually, so you’ll have to release the trigger to stop the flow. Nozzles are aluminum, which is lightweight with good corrosion resistance.
Style A has a larger spout and a higher flow rate than Style B to dispense large quantities of hydraulic fluid quickly.
Warning: Do not leave nozzles unattended when in use.
For technical drawings and 3-D models, click on a part number.
Spout | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Max. Flow Rate, gpm | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Each | |
| A | 60 | 1 1/2 | Threaded NPT Female | 50 psi @ 72° F | -40° to 300° | 1 7/8" | 8 3/8" | Aluminum | Manual | 00000000 | 0000000 |
TIG Torch Nozzles
Direct the flow of shielding gas to your weld with these nozzles. When choosing a nozzle size, consider the thickness of the material you’re welding. In general, the thicker the material, the higher the nozzle size you should use. All nozzles require a compatible collet in order to connect to your TIG torch.
Ceramic—These nozzles are more durable than borosilicate glass nozzles, but can limit visibility since they aren’t transparent. Use them for general purpose welding applications. Standard nozzles require a threaded collet body. Gas-saving nozzles use less gas than standard nozzles but won’t compromise the quality of your weld. These nozzles require a gas diffuser, which prevents oxidation and pitting in the weld by reducing gas turbulence and improving shielding.
Borosilicate Glass—These nozzles are transparent, so you can see what you’re working on even in tight corners, but they break more easily than ceramic nozzles. Even though they use less gas than standard nozzles, they won’t compromise the quality of your weld. These nozzles require a push-on collet body as well as a gas diffuser, which prevents oxidation and pitting in the weld by reducing gas turbulence and improving shielding.
Gas Coverage—Narrow nozzles are good for welding most metals. Wide nozzles produce a large cloud of shielding gas, so they’re a good choice when working with metals that are difficult to weld, such as titanium and Inconel. However, they’re harder to fit into corners than standard nozzles.
| For Torch Series Number | Nozzle Size | For Electrode Dia. | Industry Number | Each | |
Ceramic for Narrow Gas Coverage | |||||
|---|---|---|---|---|---|
Standard | |||||
| 9, 20, 25 | No. 4 | __ | 13N08 | 000000000 | 00000 |
| 9, 20, 25 | No. 5 | __ | 13N09 | 000000000 | 0000 |
| 9, 20, 25 | No. 6 | __ | 13N10 | 000000000 | 0000 |
| 9, 20, 25 | No. 7 | __ | 13N11 | 000000000 | 0000 |
| 9, 20, 25 | No. 8 | __ | 13N12 | 00000000 | 0000 |
| 9, 20, 25 | No. 10 | __ | 13N13 | 000000000 | 0000 |
| 17, 18, 26 | No. 4 | __ | 10N50 | 000000000 | 0000 |
| 17, 18, 26 | No. 5 | __ | 10N49 | 000000000 | 0000 |
| 17, 18, 26 | No. 6 | __ | 10N48 | 000000000 | 0000 |
| 17, 18, 26 | No. 7 | __ | 10N47 | 000000000 | 0000 |
| 17, 18, 26 | No. 8 | __ | 10N46 | 000000000 | 0000 |
| 17, 18, 26 | No. 10 | __ | 10N45 | 000000000 | 0000 |
| 17, 18, 26 | No. 12 | __ | 10N44 | 000000000 | 0000 |
Gas Saving | |||||
| 9, 20, 25 | No. 4 | __ | 53N58 | 000000000 | 0000 |
| 9, 20, 25 | No. 5 | __ | 53N59 | 000000000 | 0000 |
| 9, 20, 25 | No. 6 | __ | 53N60 | 000000000 | 0000 |
| 9, 20, 25 | No. 7 | __ | 53N61 | 000000000 | 0000 |
| 9, 20, 25 | No. 8 | __ | 53N61S | 000000000 | 0000 |
| 17, 18, 26 | No. 4 | __ | 54N18 | 000000000 | 0000 |
| 17, 18, 26 | No. 5 | __ | 54N17 | 000000000 | 0000 |
| 17, 18, 26 | No. 6 | __ | 54N16 | 000000000 | 0000 |
| 17, 18, 26 | No. 7 | __ | 54N15 | 000000000 | 0000 |
| 17, 18, 26 | No. 8 | __ | 54N14 | 000000000 | 0000 |
Ceramic for Wide Gas Coverage | |||||
Gas Saving | |||||
| 9, 20, 25 | __ | 0.063" | 53N6CN2-16 | 000000000 | 00000 |
| 9, 20, 25 | __ | 0.094" | 53N6CN2-32 | 000000000 | 00000 |
| 9, 20, 25 | __ | 0.125" | 53N6CN2-18 | 000000000 | 00000 |
Borosilicate Glass for Narrow Gas Coverage | |||||
Gas Saving | |||||
| 9, 20 | __ | 0.063", 0.094", 0.125" | __ | 000000000 | 00000 |
| 17, 18, 26 | __ | 0.063", 0.094", 0.125" | __ | 000000000 | 00000 |
Borosilicate Glass for Wide Gas Coverage | |||||
Gas Saving | |||||
| 9, 20 | __ | 0.063", 0.094", 0.125" | __ | 000000000 | 00000 |
| 17, 18, 26 | __ | 0.063", 0.094", 0.125" | __ | 000000000 | 00000 |
MIG Gun Nozzles
| For Manufacturer Model Number | Style | Bore Size | Each | |
| Bernard 200, 300, Q150 | A | 1/2" | 000000000 | 00000 |
| Bernard 200, 300, Q150 | B | 5/8" | 000000000 | 0000 |
| Hobart Trek 180 | C | 1/2" | 000000000 | 00000 |
| Lincoln Magnum 200, Magnum 250L | D | 5/8" | 000000000 | 0000 |
| Lincoln Magnum 200, Magnum 250L | E | 1/2" | 000000000 | 0000 |
| Lincoln Magnum 300, Magnum 400 | F | 1/2" | 000000000 | 00000 |
| Lincoln Magnum 300, Magnum 400 | F | 5/8" | 000000000 | 00000 |
| Miller M25, M40 | C | 1/2" | 000000000 | 00000 |
| Miller M25, M40 | C | 5/8" | 000000000 | 00000 |
| Miller M15 | C | 1/2" | 000000000 | 00000 |
| Tweco No. 3, No. 4 | E | 1/2" | 000000000 | 0000 |
| Tweco No. 3, No. 4 | E | 5/8" | 000000000 | 0000 |
| Tweco No. 3, No. 4 | F | 1/2" | 000000000 | 00000 |
| Tweco No. 3, No. 4 | F | 5/8" | 000000000 | 00000 |
| Tweco Fusion | C | 3/8" | 000000000 | 00000 |
| Tweco Fusion | C | 1/2" | 000000000 | 00000 |
| Tweco Fusion | C | 5/8" | 000000000 | 00000 |
| Tweco Fusion | C | 3/4" | 000000000 | 00000 |
| Tweco Mini No. 1 | E | 3/8" | 000000000 | 0000 |
| Tweco Mini No. 1 | F | 1/2" | 000000000 | 0000 |
| Tweco Mini No. 1 | F | 5/8" | 000000000 | 0000 |
| Tweco No. 2 | D | 5/8" | 000000000 | 0000 |
| Tweco No. 2 | E | 1/2" | 000000000 | 0000 |
| Tweco Spraymaster 250 | F | 1/2" | 000000000 | 00000 |
Gas Burners
Distribute heat evenly to avoid hotspots with these heavy duty multiflame burners.
Burner | O'all | Gas Inlet | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Heat Output, Btu/hr. | Dia. | Lg. | Lg. | Ht. | Pipe Size | Gender | Material | Features | For Use With | Each | |
| 9,500 | 1/2" | 12" | 18" | 1 7/8" | 1/4 NPT | Male | Iron | Brass On/Off Valve, Gas Mixer | 000000 | 0000000 | |
| 24,000 | 1" | 18" | 29 1/2" | 2 3/8" | 1/2 NPT | Male | Iron | Brass On/Off Valve, Gas Mixer | 000000 | 000000 | |
| 42,000 | 1 1/4" | 36" | 49" | 2 3/4" | 1/2 NPT | Male | Iron | Brass On/Off Valve, Gas Mixer | 000000 | 000000 | |
| 66,000 | 1 1/2" | 60" | 74 1/2" | 3 3/8" | 1/2 NPT | Male | Iron | Brass On/Off Valve, Gas Mixer | 000000 | 000000 | |
O'all | Gas Inlet | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Heat Output, Btu/hr. | No. of Burner Rings | Burner Dia. | Lg. | Ht. | Pipe Size | Gender | Material | Features | For Use With | Each | |
| 15,000 | 1 | 4 1/2" | 15 1/2" | 5 1/4" | 1/4 NPT | Male | Iron | Brass On/Off Valve, Gas Mixer | Natural Gas | 0000000 | 0000000 |
Torch-Style Gas Burners
Accelerate gas flow into an intense flame. These powerful burners are also known as venturi nozzles and buzzer burners.
Bench-Top Gas Burners
Also known as Bunsen and Tirrill burners, separate controls adjust flame height and temperature.
Gas Mixers
Supply the right amount of air and gas to burners. These mixers slip over the end of a burner pipe and attach with the included set screw. All have adjustable air openings. To choose your mixer and valve, determine the size of your burner pipe and gas input connection. Select about measuring pipe for more information.
Connect one end of a mixing valve to the mixer and thread the other end into your gas line.
Gas Mixers | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Outlet | Inlet | Mixing Valves | |||||||
| Pipe Size | Gender | Pipe Size | Thread Type | Gender | Material | Each | Each | ||
Threaded Inlet | |||||||||
| 1/2 | Female | 1/4 | NPT | Female | Iron | 0000000 | 0000000 | 0000000 | 000000 |
| 3/4 | Female | 1/4 | NPT | Female | Iron | 0000000 | 000000 | 0000000 | 00000 |
| 1 | Female | 1/4 | NPT | Female | Iron | 0000000 | 000000 | 0000000 | 00000 |
| 1 1/4 | Female | 1/4 | NPT | Female | Iron | 0000000 | 000000 | 0000000 | 00000 |
Unthreaded Inlet | |||||||||
| 1 | Female | 5/8 | __ | Female | Iron | 000000 | 000000 | 000000 | 000000 |
| 1 1/4 | Female | 5/8 | __ | Female | Iron | 000000 | 000000 | 000000 | 000000 |
| 1 1/2 | Female | 5/8 | __ | Female | Iron | 000000 | 000000 | 000000 | 000000 |