We will reply to your message within an hour.
More
Form a snug seal on grooved-end pipe fittings where water is a concern. Made of EPDM rubber, these gaskets won't break down from contact with water.
Made of EPDM foam rubber, these seals have hollow construction for more compressibility than solid seals.
These seals are made of solid EPDM foam rubber.
Hollow construction makes these seals more compressible than solid rubber seals. Made of EPDM rubber, they also resist salts.
Made of vinyl rubber, these seals also resist salts and detergents. Hollow construction provides compressibility.
These solid EPDM rubber seals also resist salts.
The hollow construction on these seals provides better compressibility than solid rubber seals. Made of silicone rubber, they also resist water and salts.
Tested in accordance with UL and NFPA standards, these silicone rubber seals are for use on fire-rated doors.
These solid silicone rubber seals also stand up to water and salts.
Made of solid silicone rubber and tested to meet strict NFPA fire standards, these seals can be used on fire-rated doors in environments that reach up to 600° F.
It’s the hollow construction that makes these seals more compressible than solid seals. Made of silicone foam rubber, they also resist water and salts.
Made of solid silicone foam rubber, these seals also resist water and salts.
To stand up to oil, grease, salts, water, and most detergents, these seals are made of Buna-N rubber.
More compressible than seals with a solid bulb, these seals have a hollow bulb.
These seals have a solid bulb.
Quickly seal corners without needing to bend, cut, or piece straight seals together. All of these seals are made of EPDM foam to resist water, sunlight, and ozone.
In addition to oil, these Buna-N seals resist grease, salts, water, steam, and most detergents.
FDA compliant, these seals can directly touch food. They’re made of Buna-N foam, so they resist oil, grease, salts, water, and most detergents.
Save time covering corners—these seals come formed to a corner, so they don't require bending or cutting.
Able to withstand temperatures up to 500° F, these all-rubber silicone seals resist water and salts.
These seals have an EPDM foam rubber bulb.
Made of EPDM foam, these seals resist water, sunlight, and ozone while also meeting transportation industry standards for flames, smoke, and toxicity.
Instead of cutting and adhering straight pieces together to cover a corner, these seals save you time and effort by coming already formed to 90°. All are made of EPDM foam to resist water, sunlight, and ozone.
The Buna-N foam rubber bulb on these seals also resists grease, salts, water, steam, and most detergents.
Already formed to 90°, these seals save you time and effort because you don’t have to cut and adhere straight pieces together to cover a corner. They’re made of Buna-N foam, so they resist oil, grease, salts, water, and most detergents.
FDA compliant and made of silicone rubber, these seals are safe for direct contact with food and in temperatures up to 350° F.
The EPDM rubber wiper is firmer and more durable than the EPDM foam rubber wipers.
These seals have an EPDM foam rubber wiper, which is softer and more flexible than EPDM rubber wipers.
Made of silicone rubber, these seals can handle temperatures up to 500° F, plus they resist water and salts.
In addition to oil, these seals resist grease, salts, water, steam, and most detergents.
Push these T-seals into grooves and channels to block out moisture, dust, and debris.
Made of EPDM foam or EPDM rubber, these seals stand up to water, sunlight, and ozone.
Commonly used on vehicle windows, these seals have a flocked, velvet-like finish to reduce friction.
Made of EPDM rubber, these seals resist water, sunlight, and ozone.
Use these H-seals to lock out moisture, dust, and debris around windows and panels.
Seal stationary windows into place with these EPDM seals. EPDM resists water, sunlight, and ozone.
Softer and more flexible than EPDM rubber, these EPDM foam seals have a wiper that clears debris and a bulb that conforms to uneven surfaces to guard against dust, noise, and vibration.
With an accordion shape, these seals extend to cover large gaps, so they block debris and allow the two edges they connect to move.
Hollow construction makes these seals more compressible than solid seals.
These seals have solid construction.
These hollow seals offer better compressibility than solid seals.
Firmer and more durable than EPDM foam rubber seals, these seals are made of EPDM rubber. They also resist salts.
Hollow construction on these vinyl rubber seals provides better compressibility than seals with a foam core. They also resist salts and detergents.
The foam core makes these vinyl rubber seals firmer and more durable than hollow seals. They also resist salts and detergents.
Softer and more flexible than EPDM rubber seals, these EPDM foam rubber seals will effortlessly conform to uneven surfaces.
Made of Buna-N rubber, these seals resist oil, grease, salts, water, steam, and most detergents.
The flat edges on these square-profile seals provide more sealing surface than round-profile seals. They’re made of 98% silica to resist temperatures up to 2300° F.
Made of 96% silica, these seals resist temperatures up to 1800° F.
Made of Buna-N, these O-rings resist grease, hydraulic oil, and motor oil—plus mild chemicals and water.
These Buna-N O-rings are made and bagged in an ISO Class 7 (Fed. Std. 10,000) clean room.
If these O-rings deteriorate, they can be picked up by metal detection systems.
Flexible even at temperatures as low as -60° F, these fluorosilicone O-rings will keep your fittings free from leaks. They’re often used on fuel and coolant hose because fluorosilicone resists many chemicals, including ethanol and ethylene glycol.
Able to withstand temperatures up to 400° F, these O-rings are softer than standard silicone O-rings for a better seal in low-pressure applications.
These O-rings also resist ethanol and ethylene glycol.
These O-rings withstand higher temperatures than standard EPDM O-rings.
When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements.
Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection.
Made of FDA-listed material for use with food and beverage.
These O-rings also resist ammonia, ethylene glycol, and isopropyl alcohol.
This soft cord stock creates a better seal in low-pressure applications that standard neoprene cord stock.
Use neoprene cord stock to make O-rings for applications that come into contact with water.
In addition to water and steam, this EPDM cord stock resists diluted salt solutions, ethanol, and isopropyl alcohol.
Create round-profile O-rings for sealing applications near ovens and other hot areas in your food plant.
These assortments include a mix of EPDM O-rings that resist water and steam and silicone O-rings that resist temperatures up to 450° F.
In addition to water and steam, these EPDM O-Rings resist ethanol and ethylene glycol.
These kits include everything you need to make your own Buna-N, fluoroelastomer, or EPDM O-rings.
These U-cup seals create less friction than O-ring-loaded U-cups, so they wear more slowly. Also known as lip seals, U-cups have a sealing lip on both the inside and outside edges, so they can be used for rod and piston sealing.
Rated for pressure up to 10,000 psi, these leather U-cups handle over 80 times more pressure than our Buna-N U-cups.
The slippery PTFE surface of these seals allows rod motion up to seven times faster than our other rod seals.
Avoid common O-ring failure in dynamic applications—the square base of these seals prevents twisting, while backup rings protect against extrusion.
PTFE gives these seals a slippery surface that facilitates rod speeds over seven times faster than our other buffering seals. They're rated for pressure up to 5,000 psi.
For use in air-powered cylinders, these seals prevent the piston from slamming against the cylinder body to minimize wear and noise.
PTFE gives these seals a slippery surface that allows rod speeds more than two times faster than our other piston seals.
A square O-ring prevents these piston seals from rocking in the groove.
Rated for pressure up to 10,000 psi, these seals withstand the highest pressure of our piston seals.
A two-lip design means that these wipers also function as a rod seal.
Made from MDS-filled PTFE for a slippery surface, these wipers allow rods to move three times faster than other rod wipers.
Replace wipers in open-groove cylinders—these wipers have an integral steel case so they press fit into the groove around the rod.
Cut this stock to make wear rings that fit any rod or bore diameter.
Made from PTFE, these wear rings have a slippery surface that allows rods to move at least three times faster than nylon wear rings.
Made from glass-filled nylon for excellent wear resistance and strength.
Ribbed Buna-N over steel creates a tight seal with the bore, even when mating with a rough surface or in a split housing.
These seals have a metal case that creates a tight seal when mating with smooth surfaces.
Also known as oil seals, use these to retain oil on rotating shafts in motors, pumps, bearings, and gearboxes. A spring secures the lip against the shaft, preventing messy leaks. Press-fit seals into the bore around the shaft.
Designed with an extended lip, these seals have the flexibility to accommodate shaft misalignment up to 0.125". They're also known as clipper seals.
Also known as grease seals, these are designed to retain thick lubricant at low pressure. They have a light grip on the shaft that creates less friction than spring-loaded seals.
A slippery PTFE surface allows these seals to function at speeds at least 25% faster than other rotary shaft seals.
Swap out old seals without disassembling components—these seals come split for easy installation. They're also known as clipper seals.
Made from Buna-N for excellent resistance to oil and grease.
These seals are fluoroelastomer, so they have excellent chemical resistance and withstand temperatures up to 390° F.
An extended spring on these seals accommodates variations in seal cavity length and pump misalignment.
Multiple internal springs ensure these seals keep the sealing surfaces in contact in demanding applications, such as agricultural, chemical, and mining pumps.
These seals are commonly used in well, sump, and displacement pumps.
Install these seals faster and with less technical expertise than other mechanical shaft seals that come in two pieces. They come with their seal and seat already assembled.
Aramid and PTFE fibers are blended for seals that resist chemicals and abrasion. Use these seals in pumps.
These lubricated PTFE fiber seals stand up to most chemicals. Use them in pumps and valves.
Also known as 100% GFO, these expanded PTFE seals contain graphite powder, which dissipates heat away from the shaft and allows pumps to run cool at high speeds.
Built for high-speed pump and valve applications, these super-tough seals are made of expanded-graphite yarn with carbon-yarn corners.
These seals are made of PTFE fiber without a lubricant, so they’re harder than other chemical-resistant packing seals to handle high-pressure valve applications.
Made of PTFE-impregnated synthetic fiber, these seals are for use in pumps.
Our most compressible packing seals, these require less pressure than any other to make an effective seal. They’re made of lubricated PTFE-impregnated aramid fiber and are for use in pumps.
Since they require lighter packing pressure than standard oil- and water-resistant packing seals, these seals cause less friction and reduce shaft wear. They are for use in pumps and valves.
Synthetic yarn that’s comparable in strength to aramid is combined with graphite for soft seals that dissipate heat away from the shaft to extend the life of pumps.
The most abrasion resistant of all our packing seals, these are made of PTFE-impregnated aramid fiber that has been saturated in a lubricant. They are for use in pumps.
Offering excellent flexibility, these seals are made of expanded graphite yarn. Use them for steam applications in pumps and valves.
Use these graphite-impregnated graphite seals for steam applications in pumps and valves.
The Inconel-wire reinforcement in these expanded-graphite yarn seals ensures they keep their shape longer than the High-Flexibility Steam-Resistant Packing Seals. Use them for steam applications in valves.
Made of graphite-impregnated carbon, these steam-resistant seals dissipate heat from the shaft to protect pumps and valves when operating at high speeds.
Made of flax fiber, these seals are excellent for marine applications since they resist salt water.
PTFE has excellent chemical resistance and withstands a wide temperature range of -110° F to 500° F.
These leather V-ring packing seals handle over twice the pressure as PTFE. Leather is tough, pliable, and wear resistant, so it flexes to fit uneven surfaces and fill voids.
For use in valves and pumps, this thin, flexible tape is made from high-purity graphite with no fibers or binders that could contaminate your process line.
Install between layers of packing seals to ensure lubricants are distributed evenly. These lubricating rings are also known as lantern rings.
Use these O-rings with brass compression tube fittings that have BSPP male threads. They create a seal on the BSPP male threads to guard against leaks.
Insert these washers in the threaded female end of a garden hose fitting to prevent leaks.
Install these strainer washers in pipe or fittings to protect equipment in locations where other strainers don’t fit.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to harsh chemicals. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Wrap this tape tightly around pipe and other surfaces to seal cracks and joints without having to shut down your system.