Water- and Steam-Resistant Sticky Silicone Gel Gasket Material
Sticky on both sides, these silicone gel sheets conform to irregular surfaces and stay in place for an effective moisture barrier. They resist water, steam, salts, grease, oil, and detergents in low-pressure applications. Cut with scissors or a utility knife.
Abrasion-Resistant Polyurethane Rubber Sheets, Bars, and Strips
This polyurethane combines the shock absorbing qualities of rubber with the tear resistance of plastic. Use it for high-tension applications such as conveyor belts, as well as for high-wear applications such as cutting surfaces, bumpers, and liners.
Super-Stretchable Abrasion-Resistant Natural Rubber Sheets and Strips
These natural rubber sheets and strips will stretch up to six times their length. Use them in dynamic applications, such as vibration isolators and shock mounts. Natural rubber is often called gum rubber and latex rubber.

- Color: Amber (semi-clear)
- Temperature Range: -75 to 250° F
- Tensile Strength: 4,000 psi
- For Use Outdoors: No
Super-Stretchable Abrasion-Resistant Natural Rubber Sample Packs

You'll get one sheet of each thickness listed in the table.
6" × 6" | ||
---|---|---|
Thick. | Pkg. | |
0.006", 0.008", 0.01", 0.012", 0.014", 0.02", 0.03" | 00000000 | 000000 |
Chemical-Resistant Ultra-High Temperature Kalrez Rubber Sheets

- Color: Black
- Temperature Range: 6° to 445° F
- Tensile Strength: 2,300 psi
- For Use Outdoors: Yes
Even when temperatures rise to 445° F, these Kalrez sheets are resistant to virtually all classes of chemicals. They are not resistant to fluorinated solvents or ethylene oxide.
Nonporous Alumina Ceramic Sheets and Bars

- Color: White
- Max. Temperature: See table
- Fabrication: Fired
- Electrical Properties: 4 1/2" × 4 1/2" sheets are electrical insulating
- Dielectric Strength: See table
- Porosity: 0%
- Compressive Strength: 300,000 psi
Seal out air and gas in high-temperature and high-wear applications. This ultrahard ceramic can also be used in applications that require superior strength.
Thick. | Thick. Tolerance | Wd. | Lg. | Max. Temperature, °F | Dielectric Strength, V/mil | Each | |
0.030" | -0.003" to 0.003" | 4 1/2" | 4 1/2" | 2910° | 210 | 0000000 | 000000 |