These gaskets absorb electromagnetic interference (EMI) and radio frequency interference (RFI) to prevent inaccurate signals, flickering displays, and other electrical problems. Made of foam or rubber combined with conductive material, they compress to fill gaps and complete a grounding path around doors and access panels.

Sheets work well between two flat surfaces.

Half-round gaskets work well in grooves. Use a gasket slightly thicker than the depth of the groove; it will compress to fill the gap.

Polyurethane foam gaskets are covered with a conductive nickel/copper braided fabric. A nonconductive adhesive holds them in place. To protect sensitive equipment, they block at least twice as much interference as urethane foam gaskets. They meet UL 94V0, so they self-extinguish within 10 seconds if they catch fire and won’t spread the fire by dripping. Cut these gaskets to length with scissors.

Even after repetitive compression, these super-soft sheets and strips maintain their cushioning ability. Use them to dampen noise and isolate vibration. This material is also known as Sorbothane.

Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.

Metal- and X-ray detectable sheets and strips contain metal and chemical additives that will set off metal detectors and show up on X-ray machines if they fall into your food lines. The metal additive also makes it easy for magnetic traps to catch any broken pieces that may fall into a line. Use these sheets and strips to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs. They do not contain Bisphenol A (BPA), which is a chemical that can contaminate process lines.