We will reply to your message within an hour.
Because this expanded PTFE tape is thicker than other gasket tape, it fills the irregularities on rough-surfaces flanges when compressed for a tight seal.
These gaskets absorb electromagnetic interference (EMI) and radio frequency interference (RFI) to prevent inaccurate signals, flickering displays, and other electrical problems.
Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.
Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.
Made of solid silicone foam rubber, these seals also resist water and salts.
Hollow construction makes these seals more compressible than solid seals.
Firmer and more durable than EPDM foam rubber seals, these seals are made of EPDM rubber. They also resist salts.
A tighter braid makes these fiberglass seals more durable than High-Temperature Ultra-Conformable Rope Edge Seals.
Made from tightly woven calcium alumina silicate, these seals can handle temperatures from –300° to 1100° F.
When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements. These resist grease, hydraulic oils, and motor oil.
When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements.
When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements. These O-rings withstand temperatures up to 450° F.
This square-profile cord stock has flat edges on all four sides, which creates a better seal than round profile in static applications, such as hose, pipe, and faucet connections.
Made of FDA-listed material for use with food and beverage, these PTFE seals are lubricated with mineral oil. Use them in pumps.
Fill irregularities in valve stem with these soft PTFE seals.
Aramid and PTFE fibers are blended for seals that resist chemicals and abrasion. Use these seals in pumps.
These lubricated PTFE fiber seals stand up to most chemicals. Use them in pumps and valves.
Also known as 100% GFO, these expanded PTFE seals contain graphite powder, which dissipates heat away from the shaft and allows pumps to run cool at high speeds.
These seals are made of PTFE fiber without a lubricant, so they’re harder than other chemical-resistant packing seals to handle high-pressure valve applications.
Offering excellent flexibility, these seals are made of expanded graphite yarn. Use them for steam applications in pumps and valves.
Use these graphite-impregnated graphite seals for steam applications in pumps and valves.
The Inconel-wire reinforcement in these expanded-graphite yarn seals ensures they keep their shape longer than the High-Flexibility Steam-Resistant Packing Seals. Use them for steam applications in valves.
Made of graphite-impregnated carbon, these steam-resistant seals dissipate heat from the shaft to protect pumps and valves when operating at high speeds.
Made of PTFE-impregnated synthetic fiber, these seals are for use in pumps.
Our most compressible packing seals, these require less pressure than any other to make an effective seal. They’re made of lubricated PTFE-impregnated aramid fiber and are for use in pumps.
Since they require lighter packing pressure than standard oil- and water-resistant packing seals, these seals cause less friction and reduce shaft wear. They are for use in pumps and valves.
Synthetic yarn that’s comparable in strength to aramid is combined with graphite for soft seals that dissipate heat away from the shaft to extend the life of pumps.
The most abrasion resistant of all our packing seals, these are made of PTFE-impregnated aramid fiber that has been saturated in a lubricant. They are for use in pumps.
For applications requiring only part of the vacuum plate surface, use gasketing to seal off the in-use area. Cut to length.