Made of FDA-listed material for use with food and beverage.

This material is made with neoprene for resistance to refrigerants.

For use in high-pressure applications up to 3,000 psi.

These gaskets absorb electromagnetic interference (EMI) and radio frequency interference (RFI) to prevent inaccurate signals, flickering displays, and other electrical problems.

Push these T-seals into grooves and channels to block out moisture, dust, and debris.

These loosely-knitted fiberglass seals are more flexible and conformable than High-Temperature Slotted Edge Seals. They resist grease, oil, hydraulic fluid, and solvents and can withstand temperatures up to 1000° F.

Made from FDA-listed materials for use with food.

While other black rubber can leave a mark after use, these specially formulated neoprene sheets leave no evidence behind.

This neoprene dissipates static electrical charge, which can damage or cause equipment to malfunction.

These sheets and strips have one layer of cotton/polyester fabric for every 1/16" of thickness, so they maintain their size and shape under heavy compression better than the standard nonreinforced multipurpose neoprene. Use them as gaskets.

Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.

Made of FDA-listed materials, these sheets and strips are for use with food.

With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.

Often used as inner tubes, butyl rubber won’t allow air, fumes, or gases to pass through.

For every 1/16" of thickness, there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets and strips as flange gaskets and anywhere heavy compression would squeeze nonreinforced EPDM out of place.

Even after repetitive compression, these super-soft sheets and strips maintain their cushioning ability. Use them to dampen noise and isolate vibration.

Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.

With one layer of polyester fabric for every 1/16” of thickness, these sheets and strips maintain their size and shape under heavy compression better than the nonreinforced abrasion-resistant SBR.

These sheets and strips offer better shock-absorbing qualities and longer life than standard Oil-Resistant Buna-N.

Because these sheets and strips are made from peroxide-cured Buna-N rubber, they have better heat resistance than standard Oil-Resistant Buna-N rubber sheets and strips.

Greater tensile strength than standard Food-Grade Oil-Resistant Buna-N rubber gives these sheets and strips better shock-absorbing qualities and longer life. They’re made from FDA-listed materials for use with food and beverage and offer good resistance to animal and vegetable oils.

Temperatures as low as –70° F have no effect on these fluorosilicone sheets and strips.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

These sheets and strips will bounce back to shape, even after extended compression.

One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.

Even after extended compression, these sheets and strips will bounce back to shape.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

Pressed into ultra-dense sheets, these silicon-nitride ceramic sheets resist deforming, expanding, or cracking when compressed, bent, or exposed to quick temperature changes. They’re just as strong and fracture resistant as zirconia ceramic, and hold their strength and shape at higher temperatures.

Also known as Macor, these glass-mica ceramic sheets and bars withstand temperatures up to 1470° F.