With a key-locking mechanism, these locks provide more security than other gate locks.

Secure swinging doors in wire and chain link partitions.

For use alone or as part of an access-control system, these locks use magnets to hold gates closed.

Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.

These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.

The mounting screws on these padlockable latches are concealed to prevent tampering.

Slide the bolt and drop the knob into the notch to secure.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

Push the bolt into the strike plate to secure doors, gates, and cabinets.

Bolts are spring-loaded to stay latched until you activate the pull.

Choose these locks if you need several locks that open with the same key.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.

Latches snap shut when you push the bar in the strike plate to prevent accidental unlatching. Press the button on the strike plate to release the bar.

Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.