Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

Slide the bolt and drop the knob into the notch to secure.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

The low-profile head on these pins holds them in place on one side.

Also known as universal clevis pins, these pins have holes on 1/4" centers so you can change the length by moving the cotter pin.

The bend makes these pins easy to insert and pull out.

A plastic-coated T-handle welded to these pins makes them easy to grab.

A swivel handle makes these pins easy to install and remove, while the toggle locks them in place. Flip the toggle to release the pin.

These one-piece fasteners lock in place with a toggle. Flip the toggle to release the pin.

Install or remove these pins from either side. Slide a retaining ring into the groove for a secure hold that takes up less space than a cotter pin.

Use a padlock to secure these pins. The bend makes them easy to insert and pull out.

These pins have a low-profile head, so they won't get knocked out of place. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

These pins adjust to take up play in a system or hold parts in holes of varying thicknesses. Spin the handle up or down, then tighten the locknut to change the length by up to ½”. Pins lock in place until you push the button to release the spring-loaded retaining balls.

These three-way holders can be inserted under the door, over the top corner of the door, or over the hinge pin to hold a door open.