Filter by
Display Type
Indicator Type
Distance Measured
Dial Hand Direction
Dial Face Color
Orientation
Dial Indicator Size
Bearing Type
Manufacturer Model Number
Contact Point Length
Base Mount Type
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Mitutoyo Plus/Minus Dial Plunger Variance Indicators
 |  |  |
Stem Mount (Side View) | Lug and Stem Mount (Side View) |
For comparative measurements of a part's tolerance against a reference measurement, these indicators have a balanced dial with positive values on one side and negative values on the other side. A spring-loaded plunger retracts and extends to measure objects. All have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles.
Stem Mount—Stem-mount indicators have a flat back to fit in tight spaces.
Lug Mount, Stem Mount—Lug- and stem-mount indicators can be installed from the back with the lug or the bottom with the stem.
Dial | Contact Point | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Dial Indicator Size | Mounting Stem Dia. | Mounting Lug Hole Dia. | Dia. | Reading Inch | Dia. | Lg. | Mounting Thread Size | Mfr. Model No. | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.025" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | — | 2 1/4" | 0-5-0 | 0.118" | 0.366" | 4-48 | 2803AB-10 | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0 mm to 1.000 mm | 0.001 mm | ±0.005 mm | AGD Group 2 | 5/16" | — | 2 1/4" | 0-100-0 | 0.118" | 0.595" | M2.5 | 2109AB-10 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lug Mount, Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.025" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-5-0 | 0.118" | 0.366" | 4-48 | 2803A-10 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.025" | 0.0001" | ±0.0002" | AGD Group 0 | 3/8" | 1/4" | 1 7/32" | 0-5-0 | 0.118" | 0.28" | 4-48 | 1925A-10 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.050" | 0.0005" | ±0.0005" | AGD Group 0 | 3/8" | 1/4" | 1 7/32" | 0-10-0 | 0.118" | 0.31" | 4-48 | 1923A-10 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Economy Dial Lever Variance Indicators
Horizontal Orientation
 |
Dial | Contact Point | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Mounting Stem Dia. | No. of Dovetail Mounts | Dia. | Reading Inch | Dia. | Lg. | Swivel Angle | Includes | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dovetail Mount, Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.008" | 0.0001" | ±0.00015" | 5/32", 3/8" | 2 | 1 9/32" | 0-40-0 | 0.078" | 1/2" | 180° | 5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.03" | 0.0005" | ±0.0004" | 5/32", 3/8" | 2 | 1 9/32" | 0-15-0 | 0.078" | 1/2" | 180° | 5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Vertical Orientation
 |
Dial | Contact Point | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Mounting Stem Dia. | No. of Dovetail Mounts | Dia. | Reading Inch | Dia. | Lg. | Swivel Angle | Includes | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dovetail Mount, Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.008" | 0.0001" | ±0.00015" | 5/32", 3/8" | 2 | 1 9/32" | 0-40-0 | 0.078" | 1/2" | 180° | 5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.03" | 0.0005" | ±0.0004" | 5/32", 3/8" | 2 | 1 9/32" | 0-15-0 | 0.078" | 1/2" | 180° | 5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mitutoyo Plus/Minus Dial Plunger Variance Indicators with Calibration Certificate
| | |
Stem Mount (Side View) | Lug and Stem Mount (Side View) |
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. They have a balanced dial with positive values on one side of the zero and negative values on the other side for comparative measurements of a part's tolerance against a reference measurement. A spring-loaded plunger retracts and extends to measure objects. All have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles.
Stem Mount—Stem-mount indicators have a flat back to fit in tight spaces.
Lug Mount, Stem Mount—Lug- and stem-mount indicators can be installed from the back with the lug or the bottom with the stem.
Dial | Contact Point | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Dial Indicator Size | Mounting Stem Dia. | Mounting Lug Hole Dia. | Dia. | Reading Inch | Dia. | Lg. | Mounting Thread Size | Mfr. Model No. | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.025" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | — | 2 1/4" | 0-5-0 | 0.118" | 0.366" | 4-48 | 2803AB-10 | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0 mm to 1.000 mm | 0.001 mm | ±0.005 mm | AGD Group 2 | 5/16" | — | 2 1/4" | 0-100-0 | 0.118" | 0.595" | M2.5 | 2109AB-10 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lug Mount, Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.025" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-5-0 | 0.118" | 0.366" | 4-48 | 2803A-10 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.050" | 0.0005" | ±0.0005" | AGD Group 0 | 3/8" | 1/4" | 1 7/32" | 0-10-0 | 0.118" | 0.31" | 4-48 | 1923A-10 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Starrett Plus/Minus Dial Plunger Variance Indicators with Calibration Certificate
 |  |  |
Stem Mount (Side View) | Lug and Stem Mount (Side View) |
These indicators come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. They have a balanced dial with positive values on one side of the zero and negative values on the other side for comparative measurements of a part's tolerance against a reference measurement. A spring-loaded plunger retracts and extends to measure objects. All have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles.
Dial | Contact Point | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Dial Indicator Size | Mounting Stem Dia. | Mounting Lug Hole Dia. | Dia. | Reading Inch | Dia. | Lg. | Mounting Thread Size | Includes | Mfr. Model No. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.002" | 0.00002" | ±0.00002" | AGD Group 1 | 3/8" | — | 2" | 0-1-0 | 1/8" | 1/4" | — | — | 81850 | 0000000 | 000000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lug Mount, Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.200" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-5-0 | 3/8" | 1/4" | 4-48 | Stem Cap | 25-511J | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50-0 | 3/8" | 1/4" | 4-48 | Stem Cap | 25-341J | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Starrett Plus/Minus Dial Plunger Variance Indicators
| |
Lug and Stem Mount (Side View) |
Dial | Contact Point | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Dial Indicator Size | Mounting Stem Dia. | Mounting Lug Hole Dia. | Dia. | Reading Inch | Dia. | Lg. | Mounting Thread Size | Includes | Mfr. Model No. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lug Mount, Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.200" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-5-0 | 3/8" | 1/4" | 4-48 | Stem Cap | 25-511J | 0000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50-0 | 3/8" | 1/4" | 4-48 | Stem Cap | 25-341J | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mitutoyo Dial Lever Variance Indicators
 |  |  |
Side View | Inch and Metric Dial Face |
Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. Use the included dovetail-to-stem attachment to convert the indicator to a stem mount.
Metric/Inch Dial Face and Inch/Metric Dial Face—Inch/metric indicators have both measurements on the dial face for quick conversions.
Variance Indicators | Replacement Variance Indicator Cases | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Dial | Contact Point | |||||||||||||||||
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric | Mounting Stem Dia. | No. of Dovetail Mounts | Dia. | Reading Inch | Reading Metric | Dia. | Lg. | Mounting Thread Size | Swivel Angle | Features | Mfr. Model No. | Each | Each | |||
| 0" to 0.0075" | 0 to 0.2 | 0.0001" | 0.002 | ±0.00015" | ±0.003 mm | 5/16" | 3 | 1 9/16" | 0-38-0 | 0-10-0 | 0.079" | 0.6" | M1.7 | 190° | Metric/Inch Dial Face | 513-409-10E | 0000000 | 0000000 | 0000000 | 00000 | |
| 0" to 0.03" | 0 to 0.7 | 0.0005" | 0.01 | ±0.0005" | ±0.015 mm | 5/16" | 3 | 1 9/16" | 0-15-0 | 0-35-0 | 0.079" | 0.65" | M1.7 | 190° | Inch/Metric Dial Face | 513-406-10E | 0000000 | 000000 | 0000000 | 0000 | |
| 0" to 0.008" | — | 0.0001" | — | ±0.0001" | — | 3/8" | 3 | 1 9/16" | 0-4-0 | — | 0.079" | 0.61" | M1.7 | 190° | — | 513-403-10E | 000000 | 000000 | 0000000 | 0000 | |
| 0" to 0.016" | — | 0.0001" | — | ±0.0002" | — | 5/32", 3/8" | 3 | 1 9/16" | 0-4-0 | — | 0.079" | 0.61" | M1.7 | 190° | — | 513-443-16A | 000000 | 000000 | 0000000 | 00000 | |
| 0" to 0.03" | — | 0.0005" | — | ±0.0005" | — | 3/8" | 3 | 1 9/16" | 0-15-0 | — | 0.079" | 0.65" | M1.7 | 190° | — | 513-402-10E | 0000000 | 000000 | 0000000 | 0000 | |
| 0" to 0.03" | — | 0.0005" | — | ±0.0005" | — | 3/8" | 3 | 1 9/16" | 0-15-0 | — | 0.079" | 1.2" | M1.7 | 190° | — | 513-412-10E | 000000 | 000000 | 0000000 | 0000 | |
| 0" to 0.06" | — | 0.0005" | — | ±0.0005" | — | 5/32", 3/8" | 3 | 1 9/16" | 0-15-0 | — | 0.079" | 0.65" | M1.7 | 190° | — | 513-442-16A | 000000 | 000000 | 0000000 | 00000 | |
| 0" to 0.06" | — | 0.0005" | — | ±0.0005" | — | 5/32", 3/8" | 3 | 1 9/16" | 0-15-0 | — | 0.079" | 1.2" | M1.7 | 190° | — | 513-446-16A | 000000 | 000000 | 0000000 | 00000 | |
| — | 0 to 0.14 | — | 0.001 | — | ±0.004 mm | 5/16" | 3 | 1 9/16" | — | 0-70-0 | 0.079" | 0.44" | M1.7 | 190° | — | 513-401-10E | 0000000 | 000000 | 0000000 | 0000 | |
| — | 0 to 0.2 | — | 0.01 | — | ±0.003 mm | 5/16" | 3 | 1 9/16" | — | 0-100-0 | 0.079" | 0.6" | M1.7 | 190° | — | 513-405-10E | 000000 | 000000 | 0000000 | 0000 | |
| — | 0 to 0.5 | — | 0.01 | — | ±0.005 mm | 5/16" | 3 | 1 9/16" | — | 0-25-0 | 0.079" | 0.74" | M1.7 | 190° | — | 513-424-10E | 0000000 | 000000 | 0000000 | 0000 | |
| — | 0 to 0.8 | — | 0.01 | — | ±0.008 mm | 5/16" | 3 | 1 9/16" | — | 0-40-0 | 0.079" | 0.69" | M1.7 | 190° | — | 513-404-10E | 000000 | 000000 | 0000000 | 0000 | |
 |
Dia. | Lg. | Mounting Thread Size | Material | Mfr. Model No. | Each | |||
|---|---|---|---|---|---|---|---|---|
| 0.079" | 0.441" | M1.7 × 0.35 mm | Carbide | 103010 | 000000 | 000000 | ||
| 0.079" | 0.453" | M1.7 × 0.35 mm | Carbide | 136075 | 000000 | 00000 | ||
| 0.079" | 0.61" | M1.7 × 0.35 mm | Carbide | 21CZB064 | 000000 | 0000 | ||
| 0.079" | 0.65" | M1.7 × 0.35 mm | Carbide | 133195 | 000000 | 00000 | ||
| 0.079" | 0.685" | M1.7 × 0.35 mm | Carbide | 103006 | 000000 | 00000 | ||
| 0.079" | 1.2" | M1.7 × 0.35 mm | Carbide | 136290 | 000000 | 00000 | ||
Starrett Dial Lever Variance Indicators
 |  |
Side View |
Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles.
Variance Indicators | Replacement Variance Indicator Cases | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dial | Contact Point | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Distance Measured | Measuring Increments | Accuracy | No. of Dovetail Mounts | Dia. | Reading Inch | Dia. | Lg. | Mounting Thread Size | Swivel Angle | Mfr. Model No. | Each | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dovetail Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.01" | 0.0001" | ±0.0001" | 3 | 1 3/8" | 0-5-0 | 0.078" | 13/16" | 1-64 | 180° | 708AZ | 00000000 | 0000000 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.02" | 0.0001" | ±0.0002" | 3 | 1 3/8" | 0-5-0 | 0.078" | 13/16" | 1-64 | 180° | 708BZ | 00000000 | 000000 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.03" | 0.0005" | ±0.0005" | 3 | 1 3/8" | 0-15-0 | 0.078" | 13/16" | 1-64 | 180° | 709AZ | 0000000 | 000000 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.06" | 0.0005" | ±0.001" | 3 | 1 3/8" | 0-15-0 | 0.078" | 13/16" | 1-64 | 180° | 709BZ | 00000000 | 000000 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Dia. | Lg. | Mounting Thread Size | Material | Mfr. Model No. | Each | |||
|---|---|---|---|---|---|---|---|---|
| 0.078" | 0.897" | 1-64 | Carbide | PT23914 | 00000000 | 000000 | ||
Interapid Dial Lever Variance Indicators
Horizontal Orientation
 |
Dial | Contact Point | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Mounting Stem Dia. | No. of Dovetail Mounts | Dia. | Reading Inch | Dia. | Lg. | Mounting Thread Size | Swivel Angle | Mfr. Model No. | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dovetail Mount, Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.016" | 0.0001" | ±0.0001" | 5/32" | 2 | 1 1/2" | 0-4-0 | 0.08" | 0.65" | M1.7 | 210° | 312b-3 | 00000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.06" | 0.001" | ±0.001" | 5/32" | 2 | 1 1/4" | 0-15-0 | 0.08" | 0.65" | M1.7 | 210° | 312b-20 | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.06" | 0.0005" | ±0.0005" | 5/32" | 2 | 1 1/4" | 0-15-0 | 0.08" | 0.65" | M1.7 | 210° | 312b-2 | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.06" | 0.0005" | ±0.0005" | 5/32" | 2 | 1 1/2" | 0-15-0 | 0.08" | 0.65" | M1.7 | 210° | 312b-1 | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0 mm to 1.6 mm | 0.01 mm | ±0.01 mm | 5/32" | 2 | 1 15/32" | 0-40-0 | 0.08" | 0.65" | M1.7 | 210° | 312-1 | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Dia. | Lg. | Mounting Thread Size | Material | Mfr. Model No. | Each | |||
|---|---|---|---|---|---|---|---|---|
| 0.031" | 0.703" | M1.7 × 0.35 mm | Carbide | 74.105998 | 00000000 | 000000 | ||
| 0.031" | 0.842" | M1.7 × 0.35 mm | Carbide | 74.111488 | 00000000 | 00000 | ||
| 0.031" | 1.465" | M1.7 × 0.35 mm | Carbide | 74.106363 | 00000000 | 00000 | ||
| 0.031" | 1.765" | M1.7 × 0.35 mm | Carbide | 74.111493 | 00000000 | 00000 | ||
| 0.06" | 0.718" | M1.7 × 0.35 mm | Carbide | 74.105997 | 00000000 | 00000 | ||
| 0.06" | 0.857" | M1.7 × 0.35 mm | Carbide | 74.111487 | 00000000 | 00000 | ||
| 0.08" | 0.728" | M1.7 × 0.35 mm | Carbide | 74.105996 | 00000000 | 00000 | ||
| 0.08" | 0.867" | M1.7 × 0.35 mm | Carbide | 74.111486 | 00000000 | 00000 | ||
| 0.08" | 1.409" | M1.7 × 0.35 mm | Carbide | 74.106361 | 00000000 | 00000 | ||
| 0.08" | 1.79" | M1.7 × 0.35 mm | Carbide | 74.111492 | 00000000 | 00000 | ||
| 0.093" | 0.735" | M1.7 × 0.35 mm | Carbide | 74.116285 | 00000000 | 00000 | ||
 |
For Mounting Stem Dia. | Material | Each | ||
|---|---|---|---|---|
| 5/32" × 3/8" | Steel | 00000000 | 000000 |
Vertical Orientation
 |
Dial | Contact Point | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Mounting Stem Dia. | No. of Dovetail Mounts | Dia. | Reading Inch | Dia. | Lg. | Mounting Thread Size | Swivel Angle | Mfr. Model No. | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dovetail Mount, Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.016" | 0.0001" | ±0.0001" | 5/32" | 1 | 1 1/2" | 0-4-0 | 0.08" | 0.65" | M1.7 | 190° | 312b-3v | 00000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.06" | 0.001" | ±0.001" | 5/32" | 1 | 1 1/4" | 0-15-0 | 0.08" | 0.65" | M1.7 | 190° | 312b-20v | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.06" | 0.0005" | ±0.0005" | 5/32" | 1 | 1 1/4" | 0-15-0 | 0.08" | 0.65" | M1.7 | 190° | 312b-2v | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.06" | 0.0005" | ±0.0005" | 5/32" | 1 | 1 1/2" | 0-15-0 | 0.08" | 0.65" | M1.7 | 190° | 312b-1v | 00000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Dia. | Lg. | Mounting Thread Size | Material | Mfr. Model No. | Each | |||
|---|---|---|---|---|---|---|---|---|
| 0.031" | 0.703" | M1.7 × 0.35 mm | Carbide | 74.105998 | 00000000 | 000000 | ||
| 0.031" | 0.842" | M1.7 × 0.35 mm | Carbide | 74.111488 | 00000000 | 00000 | ||
| 0.031" | 1.465" | M1.7 × 0.35 mm | Carbide | 74.106363 | 00000000 | 00000 | ||
| 0.031" | 1.765" | M1.7 × 0.35 mm | Carbide | 74.111493 | 00000000 | 00000 | ||
| 0.06" | 0.718" | M1.7 × 0.35 mm | Carbide | 74.105997 | 00000000 | 00000 | ||
| 0.06" | 0.857" | M1.7 × 0.35 mm | Carbide | 74.111487 | 00000000 | 00000 | ||
| 0.08" | 0.728" | M1.7 × 0.35 mm | Carbide | 74.105996 | 00000000 | 00000 | ||
| 0.08" | 0.867" | M1.7 × 0.35 mm | Carbide | 74.111486 | 00000000 | 00000 | ||
| 0.08" | 1.409" | M1.7 × 0.35 mm | Carbide | 74.106361 | 00000000 | 00000 | ||
| 0.08" | 1.79" | M1.7 × 0.35 mm | Carbide | 74.111492 | 00000000 | 00000 | ||
| 0.093" | 0.735" | M1.7 × 0.35 mm | Carbide | 74.116285 | 00000000 | 00000 | ||
|
For Mounting Stem Dia. | Material | Each | ||
|---|---|---|---|---|
| 5/32" × 3/8" | Steel | 00000000 | 000000 |
Economy Dial Lever Variance Indicators with Jointed-Arm Magnetic-Base Holder
Horizontal Orientation
 |  |
Side View |
Dial | Contact Point | Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Indicator Mounting Stem Dia. | No. of Dovetail Mounts | Dia. | Reading Inch | Dia. | Lg. | Swivel Angle | Lg. | Wd. | Magnetic Pull, lbf | Arm Type | Includes | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dovetail Mount, Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.03" | 0.0005" | ±0.0004" | 5/32", 3/8" | 2 | 1 9/32" | 0-15-0 | 0.078" | 1/2" | 210° | 1 3/16" | 1 5/32" | 70 | Jointed | 5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.03" | 0.0005" | ±0.0004" | 5/32", 3/8" | 2 | 1 9/32" | 0-15-0 | 0.078" | 1/2" | 180° | 2 1/2" | 2" | 132 | Jointed | 5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mitutoyo Dial Lever Variance Indicator Sets
 | |  |  |
Side View | Metric/Inch Dial Face | Inch/Metric Dial Face |
Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. Use the included dovetail-to-stem and height gauge/tool post attachments with the swivel clamp to mount the indicator.
Metric/Inch Dial Face—Those with a metric/inch dial face have metric measurements on the outer ring and imperial on the inner for quick reading conversions.
Inch/Metric Dial Face—Those with an inch/metric dial face have imperial measurements on the outer ring and metric on the inner for quick reading conversions.
Variance Indicators | Replacement Variance Indicator Cases | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Dial | |||||||||||||||
Inch | Metric, mm | Inch | Metric, mm | Inch | Metric | Mounting Stem Dia. | No. of Dovetail Mounts | Dia. | Reading Inch | Reading Metric | Includes | Features | Mfr. Model No. | Each | Each | |||
| 0" to 0.008" | 0 to 0.2 | 0.0001" | 0.002 | ±0.0001" | ±0.003 mm | 3/16" | 3 | 1 3/16" | 0-10-0 | 0-38-0 | 0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | Metric/Inch Dial Face | 513-409-10T | 00000000 | 0000000 | 0000000 | 00000 | |
| 0" to 0.03" | 0 to 0.7 | 0.0005" | 0.01 | ±0.0005" | ±0.0015 mm | 3/16" | 3 | 1 3/16" | 0-15-0 | 0-35-0 | 0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | Inch/Metric Dial Face | 513-406-10T | 00000000 | 000000 | 0000000 | 0000 | |
| 0" to 0.008" | — | 0.0001" | — | ±0.0001" | — | 3/8" | 3 | 1 9/16" | 0-4-0 | — | 0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | — | 513-403-10T | 0000000 | 000000 | 0000000 | 0000 | |
| 0" to 0.016" | — | 0.0001" | — | ±0.0002" | — | 3/8" | 3 | 1 9/16" | 0-4-0 | — | 0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | — | 513-443-16T | 0000000 | 000000 | 0000000 | 00000 | |
| 0" to 0.03" | — | 0.0005" | — | ±0.0005" | — | 3/16" | 3 | 1 3/16" | 0-15-0 | — | 0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | — | 513-402-10T | 00000000 | 000000 | 0000000 | 0000 | |
| 0" to 0.03" | — | 0.0005" | — | ±0.0005" | — | 3/8" | 3 | 1 9/16" | 0-15-0 | — | 0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | — | 513-412-10T | 0000000 | 000000 | 0000000 | 0000 | |
| 0" to 0.06" | — | 0.0005" | — | ±0.0005" | — | 3/8" | 3 | 1 9/16" | 0-15-0 | — | 0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | — | 513-442-16T | 0000000 | 000000 | 0000000 | 00000 | |
| 0" to 0.06" | — | 0.0005" | — | ±0.0005" | — | 3/8" | 3 | 1 9/16" | 0-15-0 | — | 0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | — | 513-446-16T | 0000000 | 000000 | 0000000 | 00000 | |
| — | 0 to 0.2 | — | 0.002 | — | ±0.003 mm | 5/16" | 3 | 1 9/16" | — | 0-100-0 | 0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | — | 513-405-10T | 0000000 | 000000 | 0000000 | 0000 | |
| — | 0 to 0.8 | — | 0.01 | — | ±0.008 mm | 5/16" | 3 | 1 9/16" | — | 0-40-0 | 0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | — | 513-404-10T | 0000000 | 000000 | 0000000 | 0000 | |
| — | 0 to 1.6 | — | 0.01 | — | ±0.01 mm | 3/16" | 3 | 1 3/16" | — | 0-40-0 | 0.039", 0.079" and 0.118" Dia. Contact Points 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp | — | 513-444-10T | 00000000 | 000000 | 0000000 | 00000 | |
|
Dia. | Lg. | Mounting Thread Size | Material | Mfr. Model No. | Each | |||
|---|---|---|---|---|---|---|---|---|
| 0.079" | 0.441" | M1.7 × 0.35 mm | Carbide | 103010 | 000000 | 000000 | ||
| 0.079" | 0.453" | M1.7 × 0.35 mm | Carbide | 136075 | 000000 | 00000 | ||
| 0.079" | 0.61" | M1.7 × 0.35 mm | Carbide | 21CZB064 | 000000 | 0000 | ||
| 0.079" | 0.65" | M1.7 × 0.35 mm | Carbide | 133195 | 000000 | 00000 | ||
| 0.079" | 0.685" | M1.7 × 0.35 mm | Carbide | 103006 | 000000 | 00000 | ||
| 0.079" | 1.2" | M1.7 × 0.35 mm | Carbide | 136290 | 000000 | 00000 | ||
Compact Dial Lever Variance Indicators
Horizontal Orientation
 |  |
Side View |
Dial | Contact Point | Overall | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Mounting Stem Dia. | Dia. | Reading Inch | Dia. | Lg. | Swivel Angle | Lg. | Dp. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.01" | 0.0001" | ±0.0002" | 3/8" | 1 5/32" | 0-5-0 | 0.078" | 0.6" | 220° | 4 3/32" | 1" | 0000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.02" | 0.0005" | ±0.0005" | 3/8" | 1 5/32" | 0-10-0 | 0.078" | 1.34" | 220° | 4 13/16" | 1" | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Economy Dial Lever Variance Indicators with Rigid-Arm Magnetic-Base Holder
Horizontal Orientation
 | |
Side View |
Dial | Contact Point | Base | Upright Post | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Indicator Mounting Stem Dia. | No. of Dovetail Mounts | Dia. | Reading Inch | Dia. | Lg. | Swivel Angle | Lg. | Wd. | Magnetic Pull, lbf | Dia. | Ht. | Arm Type | Includes | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dovetail Mount, Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.03" | 0.0005" | ±0.0004" | 5/32", 3/8" | 2 | 1 9/32" | 0-15-0 | 0.078" | 1/2" | 180° | 2 1/2" | 2" | 132 | 7/16" | 6.9" | Rigid | 5/32" Dia. Dovetail-to-Stem Attachment 3/8" Dia. Dovetail-to-Stem Attachment | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Starrett Last Word Dial Lever Variance Indicators
 |
Half of the measurement scale on the dial face is highlighted yellow to make measurements easier to read. Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. The ratcheting contact point can be adjusted to various angles.
Variance Indicators | Replacement Variance Indicator Cases | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dial | Contact Point | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Distance Measured | Measuring Increments | Accuracy | Mounting Hole Dia. | Dia. | Reading Inch | Dia. | Lg. | Swivel Angle | Includes | Mfr. Model No. | Each | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Clamp Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.03" | 0.001" | ±0.001" | 1/8" to 1/4" | 1" | 0-15-0 | 0.12" | 5/32" | 180° | Swivel Clamp | 711FSZ | 000000 | 0000000 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.03" | 0.0005" | ±0.0005" | 1/8" to 1/4" | 1" | 0-15-0 | 0.12" | 5/32" | 180° | Swivel Clamp | 711HSZ | 000000 | 000000 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Starrett Last Word Dial Lever Variance Indicator Sets
 | |
Half of the measurement scale on the dial face is highlighted yellow to make measurements easier to read. Also known as test indicators, they have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. All have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. The ratcheting contact point can be adjusted to various angles. Mount the indicator into lathe tool posts, height gauges, surface gauges, and other setups with the included accessories.
Variance Indicators | Replacement Variance Indicator Cases | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dial | Shank | Contact Point | ||||||||||||||
Distance Measured | Measuring Increments | Accuracy | Dia. | Reading Inch | Lg. | Wd. | Ht. | Dia. | Lg. | Includes | Mfr. Model No. | Each | Each | |||
| 0" to 0.03" | 0.001" | ±0.001" | 1" | 0-15-0 | 3 1/32" | 1/2" | 1/4" | 0.035" 0.062" 0.12" | 5/32" 31/64" 33/64" | 9/32" Dia. Connector Sleeve Ball-and-Socket Swivel Attachment with 3/16" Dia. Shank Ball-and-Socket Swivel Height Gauge Attachment Double-Jointed Arm Attachment Height Gauge/Tool Post Attachment with Jointed Arm Surface Gauge Attachment Swivel Clamp | 711GCSZ | 000000 | 0000000 | 0000000 | 000000 | |
| 0" to 0.03" | 0.0005" | ±0.0005" | 1" | 0-15-0 | 3 1/32" | 1/2" | 1/4" | 0.035" 0.062" 0.12" | 5/32" 31/64" 33/64" | 9/32" Dia. Connector Sleeve Ball-and-Socket Swivel Attachment with 3/16" Dia. Shank Ball-and-Socket Swivel Height Gauge Attachment Double-Jointed Arm Attachment Height Gauge/Tool Post Attachment with Jointed Arm Surface Gauge Attachment Swivel Clamp | 711LCSZ | 000000 | 000000 | 0000000 | 00000 | |
Starrett Dial Lever Variance Indicator Sets
 | | |
Side View |
Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. Use the included attachments with the swivel clamp to mount the indicator in the setup of your choice.
Variance Indicators | Replacement Variance Indicator Cases | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dial | |||||||||||||
Distance Measured | Measuring Increments | Accuracy | No. of Dovetail Mounts | Dia. | Reading Inch | Includes | Mfr. Model No. | Choose a Dial Face Color | Each | Each | |||
| 0" to 0.01" | 0.0001" | ±0.0001" | 3 | 1 3/8" | 0-5-0 | 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp with Dovetail Mount Swivel-Clamp Rod Unit with One 1/4" Dia. × 4" Lg. Rod and One 3/8" Dia. × 4" Lg. Rod | 708ACZ | White , Red , Black | 00000000 | 0000000 | 0000000 | 000000 | |
| 0" to 0.02" | 0.0001" | ±0.0002" | 3 | 1 3/8" | 0-5-0 | 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp with Dovetail Mount Swivel-Clamp Rod Unit with One 1/4" Dia. × 4" Lg. Rod and One 3/8" Dia. × 4" Lg. Rod | 708BCZ | White | 00000000 | 000000 | 0000000 | 00000 | |
| 0" to 0.03" | 0.0005" | ±0.0005" | 3 | 1 3/8" | 0-15-0 | 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp with Dovetail Mount Swivel-Clamp Rod Unit with One 1/4" Dia. × 4" Lg. Rod and One 3/8" Dia. × 4" Lg. Rod | 709ACZ | White , Red , Black | 00000000 | 000000 | 0000000 | 00000 | |
| 0" to 0.06" | 0.0005" | ±0.001" | 3 | 1 3/8" | 0-15-0 | 3/8" Dia. Dovetail-to-Stem Attachment Height Gauge/Tool Post Attachment Swivel Clamp with Dovetail Mount Swivel-Clamp Rod Unit with One 1/4" Dia. × 4" Lg. Rod and One 3/8" Dia. × 4" Lg. Rod | 709BCZ | White | 00000000 | 000000 | 0000000 | 00000 | |
|
Dia. | Lg. | Mounting Thread Size | Material | Mfr. Model No. | Each | |||
|---|---|---|---|---|---|---|---|---|
| 0.078" | 0.897" | 1-64 | Carbide | PT23914 | 00000000 | 000000 | ||
Plus/Minus Dial Plunger Variance Indicators with Calibration Certificate
 |  |
Side View |
For comparative measurements of a part's tolerance against a reference measurement, these indicators have a balanced dial with positive values on one side and negative values on the other side. A spring-loaded plunger retracts and extends to measure objects. Rotate the dial face for viewing at multiple angles. They have highly sensitive, wear-resistant jeweled bearings for a long service life. All come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.
Dial | Contact Point | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Distance Measured | Measuring Increments | Accuracy | Dial Indicator Size | Mounting Stem Dia. | Mounting Lug Hole Dia. | Dia. | Reading Inch | Dia. | Lg. | Mounting Thread Size | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lug Mount, Stem Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.025" | 0.0001" | ±0.0001" | AGD Group 1 | 3/8" | 1/4" | 1 11/16" | 0-5-0 | 3/16" | 1/4" | 4-48 | 0000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.025" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-5-0 | 3/16" | 1/4" | 4-48 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.075" | 0.0005" | ±0.0005" | AGD Group 1 | 3/8" | 1/4" | 1 11/16" | 0-15-0 | 3/16" | 1/4" | 4-48 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.125" | 0.0005" | ±0.0005" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-25-0 | 3/16" | 1/4" | 4-48 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.200" | 0.0001" | ±0.0001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-5-0 | 3/16" | 1/4" | 4-48 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.250" | 0.001" | ±0.001" | AGD Group 1 | 3/8" | 1/4" | 1 11/16" | 0-50-0 | 3/16" | 1/4" | 4-48 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.250" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50-0 | 3/16" | 1/4" | 4-48 | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.500" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50-0 | 3/16" | 1/4" | 4-48 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 1.000" | 0.001" | ±0.001" | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50-0 | 3/16" | 1/4" | 4-48 | 00000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0 mm to 10.000 mm | 0.01 mm | ±0.01 mm | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50-0 | 3/16" | 1/4" | 4-48 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0 mm to 25.000 mm | 0.01 mm | ±0.01 mm | AGD Group 2 | 3/8" | 1/4" | 2 1/4" | 0-50-0 | 3/16" | 1/4" | 4-48 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dial-Indicator Shaft Alignment Chain Clamp Kits
 |
 |  |
Back Plunger | Bottom Plunger |
Find misalignment across adjacent shafts—these clamps position a dial indicator on each shaft to locate offset or angular misalignment in both the horizontal and vertical axes.
Balanced—Balanced dials are more versatile than continuous dials because they help detect misalignment in both directions. They have a center zero with positive values on one side and negative values on the other.
Back Plunger—Back plungers take up less space in your set up because their plunger sits flush against the shaft. They mount in multiple orientations to fit in a variety of set ups.
Bottom Plunger—Bottom plungers are oriented best to detect vertical misalignment. They’re also mountable and allow you to see the shaft and dial indicator at the same time, giving you accurate readings.
Dial Indicator | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Dial Type | Plunger Location | Measuring Increments | Measurement Range | Container Type | Includes | Each | ||
| 0" to 9" | Balanced | Back | 0.001" | 0" to 0.2" | Case | Inspection Mirror Two Dial Indicators Two Swivel Clamps | 0000000 | 000000000 | |
| 0" to 9" | Balanced | Bottom | 0.001" | 0" to 0.3" | Case | Inspection Mirror Two Dial Indicators Two Swivel Clamps | 0000000 | 00000000 | |
Universal-Shank Starrett Last Word Dial Lever Variance Indicators
 |
Mount these indicators to a lathe tool post or a height gauge with the included attachment, also known as a universal shank. Half of the measurement scale on the dial face is highlighted yellow to make measurements easier to read. Also known as test indicators, they have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. All have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. The ratcheting contact point can be adjusted to various angles.
Variance Indicators | Replacement Variance Indicator Cases | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dial | Shank | Contact Point | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Distance Measured | Measuring Increments | Accuracy | Dia. | Reading Inch | Dia. | Lg. | Wd. | Dia. | Lg. | Swivel Angle | Includes | Mfr. Model No. | Each | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Shank Mount | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jeweled Bearing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.03" | 0.001" | ±0.001" | 1" | 0-15-0 | 1/4" | 3 1/32" | 1/2" | 0.12" | 5/32" | 180° | Height Gauge/Tool Post Attachment with Jointed Arm | 711FSAZ | 000000 | 0000000 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 0" to 0.03" | 0.0005" | ±0.0005" | 1" | 0-15-0 | 1/4" | 3 1/32" | 1/2" | 0.12" | 5/32" | 180° | Height Gauge/Tool Post Attachment with Jointed Arm | 711HSAZ | 000000 | 000000 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
