Monitor and control equipment in food-processing and pharmaceutical plants—these transmitters convert vacuum into electrical signals for receiving devices and have a 3-A certified sanitary design. They automatically compensate for vibration and temperature changes, saving you the effort of programming manual corrections. They’re rated IP66 and NEMA 4X for protection from dust and water jets, and made of 316 stainless steel, so they won’t corrode from frequent washdowns with harsh cleaners. A highly polished surface and continuously welded seams leave no crevices for bacteria to grow. They connect to sanitary quick-clamp fittings—also known as tri-clamp fittings—that are easily assembled for regular cleaning.

Also known as transducers, these transmitters are commonly used with remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment. Use the keypad to set the vacuum range, choose the unit of measure, and zero the display. Transmitters will only provide accurate readings within the rated vacuum range. Maximum pressure is the greatest spike in pressure they can withstand without damage. Transmitters are accurate only within the pressure range, not up to the maximum pressure.

These transmitters connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.

Designed for sanitary environments, these transmitters automatically compensate for error in vacuum and pressure measurements caused by vibration and temperature fluctuations, so you don’t need to program corrections into your receiving device. They’re 3-A certified for use in sanitary facilities such as food, pharmaceutical, and biotech plants. Transmitters have IP66 and NEMA 4X ratings as protected from dust and high-pressure jets of water, and are made of corrosion-resistant stainless steel, so they won’t be damaged by frequent washdowns with harsh cleaners. A highly-polished surface with continuously welded seams leaves no room for bacteria to grow. They connect to sanitary quick-clamp fittings—also known as tri-clamp fittings—which disassemble easily for frequent cleaning.

Also known as transducers, these transmitters convert pressure and vacuum to an electrical signal that’s sent to devices such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment. Use the keypad to set the pressure range, choose the unit of measure, and zero the reading. Transmitters will only provide accurate readings within the rated pressure range. Maximum pressure is the maximum spike in pressure a transmitter can withstand without damage. Transmitters are accurate only within the pressure range, not up to the maximum pressure.

These transmitters connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.

Made of FDA-listed materials for use with food and beverage, these sights have sanitary quick-clamp connections and an electropolished 316 stainless steel body for easy disassembly and cleaning. They meet USP (United States Pharmacopeia) Class IV standard for food applications. Sights let you visually confirm flow and inspect liquid color and clarity. Backlight the back window to increase the visibility of dark liquids.

For technical drawings and 3-D models, click on a part number.

Mount these indicators on the outside of tanks in food, pharmaceutical, and other sanitary environments to monitor their liquid levels. Made from 316 stainless steel, they will not corrode from frequent washdowns with harsh cleaners and sanitizers. Rounded edges and polished surfaces prevent the risk of bacteria growth. These indicators have an impact-resistant polycarbonate shield that protects the glass window while still letting you see the liquid level. The liquid level inside these indicators matches the level in your tank, making it easy to view readings at a glance. Attach these indicators to tanks with quick-clamp sanitary fittings for fast installation and easy removal for cleaning or moving them.

For technical drawings and 3-D models, click on a part number.

For use in food processing and preparation areas, these thermometers meet NSF/ANSI standards. They have an unthreaded probe attached to a cable for dropping into tanks, vats, and drums.

For technical drawings and 3-D models, click on a part number.

A resistance temperature detector (RTD) probe responds to temperature change faster than dial thermometers.

For use in food-processing applications, this thermometer meets NSF/ANSI standards and includes a thermocouple probe with a pointed tip to pierce dense meats and frozen foods. The housing meets IP07 for protection from temporary submersion.

Check the temperature of liquids in hygienic applications such as food or pharmaceutical lines and tanks. Certified by 3-A to meet sanitary design standards, the parts of these probes that will touch liquid are highly polished to minimize spots where bacteria could grow. They're rated IP67 and IP69K, so they'll withstand temporary submersion as well as the high-pressure, high-temperature washdowns that are common in hygienic cleaning practices. Made of stainless steel, harsh cleaners and sanitizers won't cause them to corrode. They have a flange that will connect to sanitary quick-clamp fittings (also known as tri-clamp fittings); they're easy to connect and remove from your line.

Program these probes with the touch screen, and select one of three colors as a visual alert for events in your process such as irregular or fluctuating temperatures. The head swivels 345° and the face rotates all the way around, so you can mount the sensor at any angle and still see the display. To trigger actions in your process line, connect these probes to remote displays, programmable logic controllers (PLCs), and other control equipment with the M12 plug. These probes meet DIN EN 60751, an industry standard for accuracy. They’re also CE marked, meaning they meet European Union safety standards.

For technical drawings and 3-D models, click on a part number.