Used in food-processing and pharmaceutical plants to automatically compensate for temperature changes and errors caused by vibration, these transmitters have a sanitary design certified by 3-A. They’re also rated IP66 and NEMA 4X to withstand dust and washdowns. To prevent bacteria growth, as well as make cleaning easier, they have polished surfaces and continuously-welded seams. Their housing is 304 stainless steel to resist harsh cleaners and sanitizers. Connect them to your line using gaskets and clamps to join them to sanitary quick-clamp fittings (often called tri-clamp fittings); they’re easy to attach and remove for cleaning.

With these transmitters, there’s no need to program corrections for vibration and temperature fluctuations into your receiving device. Set the pressure range, choose the unit of measure, and zero the reading using the digital keypad. These transmitters convert pressure into an electrical signal that receiving devices, such as remote displays, programmable logic controllers, and motor speed controls, use to monitor pressure and control equipment. They will only provide accurate readings within the rated pressure range. Maximum pressure is the maximum spike in pressure a transmitter can withstand without damage. Transmitters are also known as transducers.

These transmitters connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.

Choose transmitters with a sensor cable to monitor pressure, set the pressure range, choose the unit of measure, and zero the reading from a distance.

Designed for sanitary environments, these transmitters automatically compensate for error in vacuum and pressure measurements caused by vibration and temperature fluctuations, so you don’t need to program corrections into your receiving device. They’re 3-A certified for use in sanitary facilities such as food, pharmaceutical, and biotech plants. Transmitters have IP66 and NEMA 4X ratings as protected from dust and high-pressure jets of water, and are made of corrosion-resistant stainless steel, so they won’t be damaged by frequent washdowns with harsh cleaners. A highly-polished surface with continuously welded seams leaves no room for bacteria to grow. They connect to sanitary quick-clamp fittings—also known as tri-clamp fittings—which disassemble easily for frequent cleaning.

Also known as transducers, these transmitters convert pressure and vacuum to an electrical signal that’s sent to devices such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment. Use the keypad to set the pressure range, choose the unit of measure, and zero the reading. Transmitters will only provide accurate readings within the rated pressure range. Maximum pressure is the maximum spike in pressure a transmitter can withstand without damage.

These transmitters connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.