Capture high-speed readings from a distance in noncontact mode or use the speed wheel to switch to contact mode. This tachometer comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. It has a 1/4"-20 female threaded bushing for tripod mounting.

BNC cable (sold separately) sends signals from the tachometer to a data collector.

This tachometer comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. It takes both speed and temperature measurements. This unit has a contact tip on one end and a noncontact sensor on the other.

Take speed and temperature measurements. This tachometer has a contact tip on one end and a noncontact sensor on the other.

Accurate to within ±0.01% of reading. Noncontact tachometers emit a beam of light or laser that reflects off a piece of reflective tape attached to the rotating point. This unit has a 1/4"-20 female threaded bushing for tripod mounting.

This tachometer comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. Noncontact tachometers emit a beam of light or laser that reflects off a piece of reflective tape attached to the rotating point.

Noncontact tachometers emit a beam of light or laser that reflects off a piece of reflective tape attached to the rotating point.

These tachometers come with a calibration certificate traceable to NIST that state they have passed a test for accuracy. They let you measure speed and inspect moving equipment.

Measure speed and inspect moving equipment.

This stroboscope comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. It shines a bright flashing light at a moving object to make it appear slow moving. Use to measure speed and to visually inspect belts and pulleys for signs of wear, such as cracking and fraying, without turning off the machine. It has a 1/4"-20 female threaded bushing for tripod mounting.

These stroboscopes come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. They shine a bright flashing light at a moving object to make it appear slow moving. Use them to measure speed and to visually inspect belts and pulleys for signs of wear, such as cracking and fraying, without turning off the machine. They have a 1/4”-20 female threaded bushing for tripod mounting.

LED stroboscopes produce a brighter, more uniform light than xenon stroboscopes. They also consume less battery power and generate less heat.

Shine a bright flashing light at a moving object to make it appear slow moving. Use to measure speed and to visually inspect belts and pulleys for signs of wear, such as cracking and fraying, without turning off the machine. This unit has a 1/4"-20 female threaded bushing for tripod mounting.

An aluminum housing makes this stroboscope strong and durable. It works by shining a bright flashing light at a moving object to make it appear slow moving. Use to measure speed and to visually inspect belts and pulleys for signs of wear, such as cracking and fraying, without turning off the machine. It has a 3-pin female M16 threaded connector.

This stroboscope comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. An aluminum housing makes it strong and durable. It works by shining a bright flashing light at a moving object to make it appear slow moving. Use to measure speed and to visually inspect belts and pulleys for signs of wear, such as cracking and fraying, without turning off the machine. It has a 3-pin female M16 threaded connector.

Integrate these stroboscopes into fast-moving lines to check quality. They’re often used to inspect printed labels, rolled metal, and packaging. Channels on three sides allow you to attach them to T-slotted framing and other equipment. They shine bright and uniform pulsing light at moving parts to make them appear slower. This helps your machine vision camera and other digital inspection equipment identify defects. Connect them to sensors to trigger flashes at precise intervals in systems where timing and coordination are crucial. For synchronized usage along your line, you can daisy-chain multiple together. All come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

For visibility in all conditions, they have three light intensity settings. The lowest is often used for highly reflective surfaces, and the highest works well on dark and high-contrast materials. For quick changes between processes, their memory stores up to 10 light patterns.

Shine a bright flashing light at a moving object to make it appear slow moving. Use to measure speed and to visually inspect belts and pulleys for signs of wear, such as cracking and fraying, without turning off the machine. They have a 1/4"-20 female threaded bushing for tripod mounting.

LED stroboscopes have a brighter and more uniform light than xenon stroboscopes. They also use less battery power and generate less heat.

Carry these stroboscopes when performing facility maintenance checks. Shine its bright flashing light at a moving object to make it appear slow moving. This helps you evaluate belts, pulleys, and other parts for signs of wear without shutting down your machines. It has a female threaded bushing, so you can mount it to a tripod to hold it steady. This stroboscope comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy.

Continuously measure the speed and running time of your engine to monitor its performance and detect mechanical issues early. These meters can be programmed based on engine run time to light up for maintenance reminders, such as oil changes, filter replacements, and inspections. Wrap the signal wire four to five times around your spark plug to secure it in place. They’re battery powered, so they will start showing readings as soon as you turn on the engine. It adjusts to nine different engine types for accurate readings. They’re rated IP67, so they won’t get damaged from dust and water.

Accurate to within ±0.001% of reading, these tachometers come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. Install in a convenient location and measure speed remotely using a sensor (sold separately). Use the buttons on the front panel to program the unit.

Proximity sensor detects moving metal objects, such as gear teeth and fan blades and can be used in dirty and wet environments. Maximum measuring distance is 0.2" from a 1/2" minimum size metal target.

Magnetic sensor has a maximum measuring distance of 0.005" from a 0.1" minimum size ferrous metal target.

Optical sensor performs best in clean environments and works at up to a 45° angle from reflective tape.

Accurate to within ±0.005% of reading. Install this tachometer in a convenient location and measure speed remotely using a sensor (sold separately). It updates twice per second when the reading exceeds 120 rpm.

Proximity sensor detects moving metal objects, such as gear teeth and fan blades and can be used in dirty and wet environments. Maximum measuring distance is 0.2" from a 1/2" minimum size metal target.

Magnetic sensor has a maximum measuring distance of 0.005" from a 0.1" minimum size ferrous metal target.

Optical sensor performs best in clean environments and works at up to a 45° angle from reflective tape.

Install in a convenient location and measure speed remotely using a sensor (sold separately).

Sensors generate a light beam across a 0.8" wide gap. When a rotating object enters this gap, the beam is broken.

Keep these meters on hand to quickly check the health of your machine and bearings. They digitally measure acceleration, frequency, and speed to help you identify potential problems, such as bearings that are off balance or misaligned. These meters have two different bases for taking readings. The magnetic base is useful for hands-free readings on magnetic surfaces. For nonmagnetic surfaces, use the pin tip and gently hold the meter against the vibrating surface. Rated IP65, these meters will continue to measure in dusty and damp workspaces.

In addition to measuring vibration, you can listen to and record machine performance. The magnetic base allows you to mount the probe on a machine for constant readings.