These are the most commonly used pressure gauges. Use them with pumps, filters, regulators, and in process lines to measure and display pressure.

These gauges fit into square cutouts in your instrument panel.

A digital display allows for easy reading of measurements.

Keep tabs on liquid levels in pump and tank applications with these gauges—a dual scale displays pressure in feet of H₂O and psi.

A liquid-filled dial reduces needle flutter for precise readings in high-vibration applications.

These gauges have a red needle that indicates the highest pressure reached since the last setting. They have a liquid-filled dial that reduces needle flutter for precise readings in high-vibration applications.

The case material and connection threads are stainless steel for protection in corrosive environments, plus the dial is glycerin-filled to reduce needle flutter in high-vibration applications.

These gauges have a unique case design that eliminates the air bubble on the dial face, which can distort readings.

Gauges have an accuracy of ± 1% to ± 1.5%. They are suitable for critical processes that require high accuracy, such as hydraulic and laboratory applications.

Designed for use with boilers, these gauges measure pressure and temperature simultaneously.

Check the pressure on your drinking water system with these gauges—they meet NSF/ANSI Standard 61 for safe use with potable water.

These gauges have a liquid-filled dial that reduces needle flutter in high-vibration applications reaching 2,000 psi.

Use in high-pressure applications up to 2,000 psi.

These gauges are 3-A certified for sanitary design in dairy and other food processing applications.

Designed for harsh environments prone to vibration, these gauges pair a corrosion-resistant 304 stainless steel case with a glycerin-filled dial that reduces needle flutter.

A 304 stainless steel case coupled with 316 stainless steel connection threads provide protection from corrosive environments.

A glycerin-filled dial reduces needle flutter for precise readings in high-vibration applications.

A band of green, yellow, and red provides a clear indication of changes in differential pressure.

Use in high-pressure applications up to 3,000 psi.

Monitor and control vacuum pumps, air compressors, and hydraulics while viewing readings and warnings on the display.

Convert both pressure and vacuum into an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. They convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

Remotely monitor pressure in general purpose applications such as pumping and compressing systems.

Measure your equipment’s pressure and send the data directly to a development board or single-board computer. Also known as transducers, these transmitters convert pressure into an electrical I²C signal and transmit it to your board.

Remotely track your system's pressure readings from the convenience of a smartphone or tablet. Good for preventative maintenance and route-based monitoring, these battery-powered transmitters use Bluetooth to alert you when equipment requires your attention.

Monitor and control pressure in portable HVAC systems, hydraulics, and oil and gas equipment. Unlike other pressure transmitters that measure the difference between your system and the atmosphere, these transmitters give measurements relative to zero pressure—regardless of altitude or temperature.

Fine-tune the pressure range on these transmitters to account for changes in pressure readings over time.

With a pressure range common to most compressed air systems, use these transmitters to monitor your system's air pressure.

FM approved and CSA certified for use in hazardous locations, these transmitters monitor pressure where combustible fumes may be present.

Measure the difference in pressure between two points in flow applications, such as heating, cooling, and pumping systems.

Measure the difference in pressure between two process lines in flow applications such as heat exchangers, chillers, and pumps. These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors.

Test and calibrate transmitters, gauges, and other equipment that measures pressure.

Gauges have an accuracy of ±0.25%.

These gauges have a glycerin-filled dial to reduce needle flutter for precise readings in high-vibration applications.