2.030mm Gears | McMaster-Carr

Filter by

Shaft Diameter

For Maximum Belt Width

3 mm

6 mm

9 mm

System of Measurement

Number of Teeth

Pitch

Number of Flanges

Material

Belt Trade Size

Overall Width

Teeth Shape

Mount Type

Bore Type

Inside Width

Outside Width

REACH

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Fabrication

Finish

92 Products

MXL Series Corrosion-Resistant Timing Belt Pulleys

Anodized aluminum has good corrosion resistance. Pulleys are MXL series (miniature extra light) and have trapezoidal teeth. The teeth match up with the grooves along the inside diameter of a timing belt in order to move components forward or backward. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.

Press-Fit Mount with Set Screw

With One Flange

With Two Flanges

Without Flanges

With One Flange

With Two Flanges

Without Flanges

For 3 mm Max. Belt Wd.
OD	Number of Teeth	Pitch	For Shaft Dia.	Bore Type	Inside Wd.	Outside Wd.	Overall Wd.	Pitch Dia.	Number of Flanges	Fabrication	Material	Hub Dia.		Each
10.8mm	10	2.030mm	3mm	Finished	4mm	5.1mm	11.1mm	6.5mm	1	Machined	Anodized Aluminum	10.8mm	00000000	000000
11.4mm	11	2.030mm	3mm	Finished	4mm	5.1mm	11.1mm	7.1mm	1	Machined	Anodized Aluminum	11.4mm	00000000	00000
12.2mm	12	2.030mm	3mm	Finished	4mm	5.1mm	11.1mm	7.8mm	1	Machined	Anodized Aluminum	12.2mm	00000000	00000
13.5mm	14	2.030mm	3mm	Finished	4mm	5.1mm	11.1mm	9.1mm	1	Machined	Anodized Aluminum	13.5mm	00000000	00000
14.1mm	15	2.030mm	4mm	Finished	4mm	5.1mm	11.1mm	9.7mm	1	Machined	Anodized Aluminum	14.1mm	00000000	00000
14.7mm	16	2.030mm	4mm	Finished	4mm	5.1mm	11.1mm	10.3mm	1	Machined	Anodized Aluminum	14.7mm	00000000	00000
16.1mm	18	2.030mm	4mm	Finished	4mm	6.6mm	12.3mm	11.6mm	2	Machined	Anodized Aluminum	7.9mm	00000000	00000
16.1mm	18	2.030mm	6mm	Finished	4mm	5.1mm	11.1mm	11.6mm	1	Machined	Anodized Aluminum	16.1mm	00000000	00000
17.4mm	20	2.030mm	4mm	Finished	4mm	6.6mm	12.3mm	12.9mm	2	Machined	Anodized Aluminum	9.2mm	00000000	00000
17.4mm	20	2.030mm	6mm	Finished	4mm	5.1mm	11.1mm	12.9mm	1	Machined	Anodized Aluminum	17.4mm	00000000	00000
18.8mm	22	2.030mm	4mm	Finished	4mm	6.6mm	12.3mm	14.2mm	2	Machined	Anodized Aluminum	9.9mm	00000000	00000
18.8mm	22	2.030mm	6mm	Finished	4mm	5.1mm	11.1mm	14.2mm	1	Machined	Anodized Aluminum	18.8mm	00000000	00000
20.1mm	24	2.030mm	6mm	Finished	4mm	6.6mm	13.1mm	15.5mm	2	Machined	Anodized Aluminum	11.2mm	00000000	00000
20.7mm	25	2.030mm	6mm	Finished	4mm	6.6mm	13.1mm	16.2mm	2	Machined	Anodized Aluminum	11.9mm	00000000	00000
22.7mm	28	2.030mm	6mm	Finished	4mm	6.6mm	13.1mm	18.1mm	2	Machined	Anodized Aluminum	12.5mm	00000000	00000
24mm	30	2.030mm	6mm	Finished	4mm	6.6mm	13.1mm	19.4mm	2	Machined	Anodized Aluminum	13.9mm	00000000	00000
25.4mm	32	2.030mm	6mm	Finished	4mm	6.6mm	13.1mm	20.7mm	2	Machined	Anodized Aluminum	15.2mm	00000000	00000
28.1mm	36	2.030mm	6mm	Finished	4mm	6.6mm	13.1mm	23.3mm	2	Machined	Anodized Aluminum	17.2mm	00000000	00000
30.7mm	40	2.030mm	6mm	Finished	4mm	7mm	13.5mm	25.9mm	2	Machined	Anodized Aluminum	19.2mm	00000000	00000
32mm	42	2.030mm	6mm	Finished	4mm	7mm	13.5mm	27.2mm	2	Machined	Anodized Aluminum	20.5mm	00000000	00000
33.4mm	44	2.030mm	6mm	Finished	4mm	7mm	13.5mm	28.5mm	2	Machined	Anodized Aluminum	21.8mm	00000000	00000
43.9mm	60	2.030mm	6mm	Finished	4mm	7mm	13.5mm	38.8mm	2	Machined	Anodized Aluminum	31mm	00000000	00000
For 6 mm Max. Belt Wd.
10.8mm	10	2.030mm	3mm	Finished	7.2mm	8.3mm	14.3mm	6.5mm	1	Machined	Anodized Aluminum	10.8mm	00000000	00000
12.2mm	12	2.030mm	3mm	Finished	7.2mm	8.3mm	14.3mm	7.8mm	1	Machined	Anodized Aluminum	12.2mm	00000000	00000
13.5mm	14	2.030mm	3mm	Finished	7.2mm	8.3mm	14.3mm	9.1mm	1	Machined	Anodized Aluminum	13.5mm	00000000	00000
14.1mm	15	2.030mm	4mm	Finished	7.2mm	8.3mm	14.3mm	9.7mm	1	Machined	Anodized Aluminum	14.1mm	00000000	00000
14.7mm	16	2.030mm	4mm	Finished	7.2mm	8.3mm	14.3mm	10.3mm	1	Machined	Anodized Aluminum	14.7mm	00000000	00000
16.1mm	18	2.030mm	4mm	Finished	7.2mm	9.9mm	15.9mm	11.6mm	2	Machined	Anodized Aluminum	7.9mm	00000000	00000
16.1mm	18	2.030mm	6mm	Finished	7.2mm	8.3mm	14.3mm	11.6mm	1	Machined	Anodized Aluminum	16.1mm	00000000	00000
17.4mm	20	2.030mm	4mm	Finished	7.2mm	9.9mm	15.9mm	12.9mm	2	Machined	Anodized Aluminum	9.2mm	00000000	00000
17.4mm	20	2.030mm	6mm	Finished	7.2mm	8.3mm	14.3mm	12.9mm	1	Machined	Anodized Aluminum	17.4mm	00000000	00000
18.8mm	22	2.030mm	4mm	Finished	7.2mm	9.9mm	15.9mm	14.2mm	2	Machined	Anodized Aluminum	9.9mm	00000000	00000
18.8mm	22	2.030mm	6mm	Finished	7.2mm	8.3mm	14.3mm	14.2mm	1	Machined	Anodized Aluminum	18.8mm	00000000	00000
20.1mm	24	2.030mm	6mm	Finished	7.2mm	9.9mm	17.5mm	15.5mm	2	Machined	Anodized Aluminum	11.2mm	00000000	00000
22.7mm	28	2.030mm	6mm	Finished	7.2mm	9.9mm	17.5mm	18.1mm	2	Machined	Anodized Aluminum	12.5mm	00000000	00000
24mm	30	2.030mm	6mm	Finished	7.2mm	9.9mm	17.5mm	19.4mm	2	Machined	Anodized Aluminum	13.9mm	00000000	00000
25.4mm	32	2.030mm	6mm	Finished	7.2mm	9.9mm	17.5mm	20.7mm	2	Machined	Anodized Aluminum	15.2mm	00000000	00000
28.1mm	36	2.030mm	6mm	Finished	7.2mm	9.9mm	17.5mm	23.3mm	2	Machined	Anodized Aluminum	17.2mm	00000000	00000
30.7mm	40	2.030mm	6mm	Finished	7.2mm	10.3mm	18.3mm	25.9mm	2	Machined	Anodized Aluminum	19.2mm	00000000	00000
32mm	42	2.030mm	6mm	Finished	7.2mm	10.3mm	18.3mm	27.2mm	2	Machined	Anodized Aluminum	20.5mm	00000000	00000
36.1mm	48	2.030mm	6mm	Finished	7.2mm	10.3mm	18.3mm	31mm	2	Machined	Anodized Aluminum	23.8mm	00000000	00000
38.3mm	60	2.030mm	6mm	Finished	__	9.5mm	18.3mm	38.8mm	__	Machined	Anodized Aluminum	29.2mm	00000000	00000
43.9mm	60	2.030mm	6mm	Finished	7.2mm	10.3mm	18.3mm	38.8mm	2	Machined	Anodized Aluminum	31mm	00000000	00000
51.2mm	80	2.030mm	8mm	Finished	__	9.5mm	19.1mm	51.7mm	__	Machined	Anodized Aluminum	38.1mm	00000000	00000
57.7mm	90	2.030mm	8mm	Finished	__	9.5mm	19.1mm	58.2mm	__	Machined	Anodized Aluminum	38.1mm	00000000	00000
64.2mm	100	2.030mm	8mm	Finished	__	9.5mm	19.1mm	64.7mm	__	Machined	Anodized Aluminum	38.1mm	00000000	00000
77.1mm	120	2.030mm	10mm	Finished	__	9.5mm	19.1mm	77.6mm	__	Machined	Anodized Aluminum	38.1mm	00000000	00000
For 9 mm Max. Belt Wd.
10.8mm	10	2.030mm	3mm	Finished	10.4mm	11.5mm	17.5mm	6.5mm	1	Machined	Anodized Aluminum	10.8mm	00000000	00000
13.5mm	14	2.030mm	3mm	Finished	10.4mm	11.5mm	17.5mm	9.1mm	1	Machined	Anodized Aluminum	13.5mm	00000000	00000
14.1mm	15	2.030mm	4mm	Finished	10.4mm	11.5mm	17.5mm	9.7mm	1	Machined	Anodized Aluminum	14.1mm	00000000	00000
14.7mm	16	2.030mm	4mm	Finished	10.4mm	11.5mm	17.5mm	10.3mm	1	Machined	Anodized Aluminum	14.7mm	00000000	00000
16.1mm	18	2.030mm	6mm	Finished	10.4mm	11.5mm	17.5mm	11.6mm	1	Machined	Anodized Aluminum	16.1mm	00000000	00000
17.4mm	20	2.030mm	6mm	Finished	10.4mm	11.5mm	17.5mm	12.9mm	1	Machined	Anodized Aluminum	17.4mm	00000000	00000
18mm	21	2.030mm	6mm	Finished	10.4mm	11.5mm	17.5mm	13.6mm	1	Machined	Anodized Aluminum	18mm	00000000	00000
18.8mm	22	2.030mm	6mm	Finished	10.4mm	11.5mm	17.5mm	14.2mm	1	Machined	Anodized Aluminum	18.8mm	00000000	00000
24mm	30	2.030mm	6mm	Finished	10.4mm	13.1mm	20.6mm	19.4mm	2	Machined	Anodized Aluminum	13.9mm	00000000	00000
25.4mm	32	2.030mm	6mm	Finished	10.4mm	13.1mm	20.6mm	20.7mm	2	Machined	Anodized Aluminum	15.2mm	00000000	00000
36.1mm	48	2.030mm	6mm	Finished	10.4mm	13.5mm	21.4mm	31mm	2	Machined	Anodized Aluminum	23.8mm	00000000	00000
38.3mm	60	2.030mm	6mm	Finished	__	12.7mm	22.2mm	38.8mm	__	Machined	Anodized Aluminum	29.2mm	00000000	00000
43.9mm	60	2.030mm	6mm	Finished	10.4mm	13.5mm	21.4mm	38.8mm	2	Machined	Anodized Aluminum	31mm	00000000	00000
46.1mm	72	2.030mm	6mm	Finished	__	12.7mm	22.2mm	46.6mm	__	Machined	Anodized Aluminum	30.4mm	00000000	00000
51.2mm	80	2.030mm	8mm	Finished	__	12.7mm	22.2mm	51.7mm	__	Machined	Anodized Aluminum	38.1mm	00000000	00000
57.7mm	90	2.030mm	8mm	Finished	__	12.7mm	22.2mm	58.2mm	__	Machined	Anodized Aluminum	38.1mm	00000000	00000
64.2mm	100	2.030mm	8mm	Finished	__	12.7mm	22.2mm	64.7mm	__	Machined	Anodized Aluminum	38.1mm	00000000	00000
77.1mm	120	2.030mm	10mm	Finished	__	12.7mm	22.2mm	77.6mm	__	Machined	Anodized Aluminum	38.1mm	00000000	00000

MXL Series Lightweight Timing Belt Pulleys

Made from polycarbonate, these pulleys are useful in applications with weight constraints. All are MXL series (miniature extra light) and have trapezoidal teeth. The teeth match up with the grooves along the inside diameter of a timing belt in order to move components forward or backward. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.

Press-Fit Mount

With Hub and One Flange (10-16 Teeth)

With Hub and Two Flanges (18 Teeth or More)

With Hub and One Flange (18 Teeth or More)

With One Flange

With Hub and Two Flanges (10–16 Teeth)

With Two Flanges

With Hub and One Flange (10–16 Teeth)

With Hub and Two Flanges (18 Teeth or More)

With Hub and One Flange (18 Teeth or More)

With One Flange

With Hub and Two Flanges (10–16 Teeth)

With Two Flanges

1 Flange
OD	Number of Teeth	Pitch	For Shaft Dia.	Bore Type	Inside Wd.	Outside Wd.	Overall Wd.	Pitch Dia.	Fabrication	Material	Hub Dia.		Each
For 6 mm Max. Belt Wd.
11mm	10	2.030mm	3mm	Plain	9.5mm	11.1mm	17.5mm	6.5mm	Molded	Polycarbonate	11mm	0000000	00000
13mm	14	2.030mm	4mm	Plain	9.5mm	11.1mm	17.5mm	9.1mm	Molded	Polycarbonate	11mm	0000000	0000
16mm	18	2.030mm	6mm	Plain	9.6mm	11.2mm	17.5mm	11.6mm	Molded	Polycarbonate	13mm	0000000	0000
16mm	18	2.030mm	8mm	Plain	8mm	9.6mm	9.6mm	11.6mm	Molded	Polycarbonate	__	0000000	0000
17mm	20	2.030mm	8mm	Plain	8mm	9.6mm	9.6mm	12.9mm	Molded	Polycarbonate	__	0000000	00000
24mm	30	2.030mm	8mm	Plain	9.6mm	11.2mm	17.5mm	19.4mm	Molded	Polycarbonate	17.5mm	0000000	00000
25mm	32	2.030mm	8mm	Plain	8mm	11.2mm	11.2mm	20.7mm	Molded	Polycarbonate	__	0000000	00000
69mm	100	2.030mm	8mm	Plain	9.6mm	11.2mm	17.5mm	64.7mm	Molded	Polycarbonate	17.5mm	0000000	00000
88mm	130	2.030mm	8mm	Plain	9.6mm	11.2mm	17.5mm	84.1mm	Molded	Polycarbonate	17.5mm	0000000	00000
2 Flanges
For 6 mm Max. Belt Wd.
11mm	10	2.030mm	3mm	Plain	7.9mm	9.5mm	17.5mm	6.5mm	Molded	Polycarbonate	11mm	0000000	00000
13mm	14	2.030mm	4mm	Plain	7.9mm	9.5mm	17.5mm	9.1mm	Molded	Polycarbonate	11mm	0000000	00000
14mm	15	2.030mm	4mm	Plain	7.9mm	9.5mm	17.5mm	9.7mm	Molded	Polycarbonate	11mm	0000000	00000
15mm	16	2.030mm	4mm	Plain	7.9mm	9.5mm	17.5mm	10.3mm	Molded	Polycarbonate	11mm	0000000	00000
16mm	18	2.030mm	6mm	Plain	8mm	11.2mm	17.5mm	11.6mm	Molded	Polycarbonate	13mm	0000000	00000
16mm	18	2.030mm	8mm	Plain	8mm	11.2mm	11.2mm	11.6mm	Molded	Polycarbonate	__	0000000	00000
17mm	20	2.030mm	8mm	Plain	8mm	11.2mm	11.2mm	12.9mm	Molded	Polycarbonate	__	0000000	00000
21mm	26	2.030mm	8mm	Plain	8mm	11.2mm	17.5mm	16.8mm	Molded	Polycarbonate	17.5mm	0000000	00000
24mm	30	2.030mm	8mm	Plain	8mm	11.2mm	17.5mm	19.4mm	Molded	Polycarbonate	17.5mm	0000000	00000
28mm	36	2.030mm	8mm	Plain	8mm	11.2mm	11.2mm	23.3mm	Molded	Polycarbonate	__	0000000	00000
28mm	36	2.030mm	8mm	Plain	8mm	11.2mm	17.5mm	23.3mm	Molded	Polycarbonate	17.5mm	0000000	00000
30mm	40	2.030mm	8mm	Plain	8mm	11.2mm	11.2mm	25.9mm	Molded	Polycarbonate	__	0000000	00000
30mm	40	2.030mm	8mm	Plain	8mm	11.2mm	17.5mm	25.9mm	Molded	Polycarbonate	17.5mm	0000000	00000
43mm	60	2.030mm	8mm	Plain	8mm	11.2mm	17.5mm	38.8mm	Molded	Polycarbonate	17.5mm	0000000	00000
46mm	65	2.030mm	8mm	Plain	8mm	11.2mm	17.5mm	42mm	Molded	Polycarbonate	17.5mm	0000000	00000
63mm	90	2.030mm	8mm	Plain	8mm	11.2mm	17.5mm	58.2mm	Molded	Polycarbonate	17.5mm	0000000	00000
82mm	120	2.030mm	8mm	Plain	8mm	11.2mm	17.5mm	77.6mm	Molded	Polycarbonate	17.5mm	0000000	00000
88mm	130	2.030mm	8mm	Plain	8mm	11.2mm	17.5mm	84.1mm	Molded	Polycarbonate	17.5mm	0000000	00000