Filler Material Filler Material |
---|
|
System of Measurement System of Measurement |
---|
|
Flexibility Flexibility |
---|
![]() | Semi-Rigid |
Material Material |
---|
|
Performance Properties Performance Properties |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
ID ID |
---|

|
|
|
OD OD |
---|
Hardness Rating Hardness Rating |
---|
|
Hardness Hardness |
---|
|
Friction Rating Friction Rating |
---|
|
For Use With For Use With |
---|
For Use Outdoors For Use Outdoors |
---|
|
Texture Texture |
---|
![]() | Smooth |
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
About Cylinder Seals

Rod wipers scrape dirt, dust, and moisture from the rod, preventing contamination inside your cylinder.
Rod seals maintain the pressure inside cylinders and prevent fluid from leaking out.
Wear rings guide the rod and piston to prevent uneven wear and optimize seal performance.
Head seals are a more reliable alternative to the standard O-ring/backup ring combination—they resist twisting and remain stable even in applications with fluctuating pressure.
Buffering seals protect hydraulic cylinders from pressure spikes and shock in high-pressure hydraulic applications.
Cushioning seals minimize wear and noise in air-powered cylinders by preventing the piston from slamming against the cylinder body.
Piston seals make a seal between their outside edge and the cylinder bore to prevent internal leaks.
About Plastic
More
Durable Glass-Filled Chemical-Resistant Slippery PTFE Rods

- Color: Off-White
- Temperature Range: -350° to 500° F
- Tensile Strength: 1,000-2,500 psi (Poor)
- Impact Strength: Not Rated
- Hardness: Durometer 55D-66D (Medium Soft)
- For Use Outdoors: Yes
- Specifications Met: FDA Compliant 21 CFR 177.1550, UL 94 V-0
Made from glass-filled PTFE, these rods are more rigid and durable than standard PTFE rods. The reinforcement also prevents them from expanding when exposed to water and heat, so you can machine them to close tolerances. Use them in high-stress applications where resistance to chemicals and extreme temperatures is essential. They have a naturally slippery surface that resists sticking.
Dia. | Dia. Tolerance | Lengths, ft. | Per Ft. | |
1/4" | 0.000" to 0.005" | 00000000 | 00000 | |
3/8" | 0.000" to 0.005" | 00000000 | 0000 | |
1/2" | 0.000" to 0.005" | 00000000 | 00000 | |
5/8" | 0.000" to 0.005" | 00000000 | 00000 | |
3/4" | 0.000" to 0.005" | 00000000 | 00000 | |
1" | 0.000" to 0.005" | 00000000 | 00000 | |
1 1/8" | 0.000" to 0.005" | 00000000 | 00000 | |
1 1/4" | 0.000" to 0.075" | 00000000 | 00000 | |
1 1/2" | 0.000" to 0.090" | 00000000 | 00000 | |
1 3/4" | 0.000" to 0.105" | 00000000 | 000000 | |
2" | 0.000" to 0.120" | 00000000 | 000000 | |
2 1/2" | 0.000" to 0.150" | 00000000 | 000000 | |
Each | ||||
---|---|---|---|---|
3" | 0.000" to 0.180" | 1 | 00000000 | 000000 |
3 1/4" | 0.000" to 0.195" | 1 | 00000000 | 000000 |
3 1/2" | 0.000" to 0.210" | 1 | 00000000 | 000000 |
4" | 0.000" to 0.240" | 1 | 000000000 | 000000 |
Durable Glass-Filled Chemical-Resistant Slippery PTFE Sheets

- Color: Off-White
- Temperature Range: -350° to 500° F
- Tensile Strength: 1,000-2,500 psi (Poor)
- Impact Strength: Not Rated
- Hardness: Durometer 55D-66D (Medium Soft)
- For Use Outdoors: Yes
- Specifications Met: UL 94V0
These glass-filled PTFE sheets offer increased rigidity over standard PTFE sheets for durability in high-stress applications. They’ll also resist expanding when exposed to water and heat, so you can machine them to close tolerances. PTFE is known for its naturally slippery surface, as well as its superior resistance to chemicals and extreme temperatures. These sheets are skived, so the edges may curl.
For technical drawings and 3-D models, click on a part number.
6" × 6" | 12" × 12" | 12" × 24" | |||||
---|---|---|---|---|---|---|---|
Thick. | Thick. Tolerance | Each | Each | Each | |||
1/32" | -0.00313" to 0.00313" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
1/16" | -0.00625" to 0.00625" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
1/8" | -0.0125" to 0.0125" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
1/4" | -0.025" to 0.025" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
3/8" | -0.0375" to 0.0375" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
1/2" | -0.05" to 0.05" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
3/4" | -0.075" to 0.075" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000000 |
1" | -0.1" to 0.1" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000000 |
Durable Glass-Filled Chemical-Resistant Slippery PTFE Tubes

- Color: Off-White
- Temperature Range: -350° to 500° F
- Tensile Strength: 1,000-2,500 psi (Poor)
- Impact Strength: Not Rated
- Hardness: Durometer 55D-66D (Medium Soft)
- For Use Outdoors: Yes
- Specifications Met: UL 94 V-0
For increased rigidity and durability over standard PTFE tubes, choose these glass-filled PTFE tubes. They offer the same naturally slippery surface that you’d expect from PTFE, along with the excellent resistance to chemicals and extreme temperatures. They can be machined to close tolerances because the reinforcement prevents them from expanding when exposed to water and heat. The OD is oversized and the ID is undersized for finishing to the sizes listed.
For technical drawings and 3-D models, click on a part number.
1 ft. Lg. | |||||
---|---|---|---|---|---|
OD | OD Tolerance | ID | ID Tolerance | Each | |
Oversized Tubes | |||||
1/8" Wall Thick. (-0.025" to 0.025") | |||||
1/2" | 0.000" to 0.025" | 1/4" | -0.025" to 0.000" | 0000000 | 000000 |
5/8" | 0.000" to 0.025" | 3/8" | -0.025" to 0.000" | 0000000 | 00000 |
3/4" | 0.000" to 0.025" | 1/2" | -0.025" to 0.000" | 0000000 | 00000 |
1" | 0.000" to 0.025" | 3/4" | -0.025" to 0.000" | 0000000 | 00000 |
1/2" Wall Thick. | |||||
2" | 0.000" to 0.188" | 1" | -0.188" to 0.000" | 0000000 | 000000 |
2 1/2" | 0.000" to 0.188" | 1 1/2" | -0.188" to 0.000" | 0000000 | 000000 |
5/8" Wall Thick. | |||||
3" | 0.000" to 0.188" | 1 3/4" | -0.188" to 0.000" | 0000000 | 000000 |
3/4" Wall Thick. | |||||
2 1/2" | 0.000" to 0.188" | 1" | -0.188" to 0.000" | 0000000 | 000000 |
3 1/2" | 0.000" to 0.188" | 2" | -0.188" to 0.000" | 0000000 | 000000 |
7/8" Wall Thick. | |||||
3" | 0.000" to 0.188" | 1 1/4" | -0.188" to 0.000" | 0000000 | 000000 |
1" Wall Thick. | |||||
3" | 0.000" to 0.188" | 1" | -0.188" to 0.000" | 0000000 | 000000 |
3 1/2" | 0.000" to 0.188" | 1 1/2" | -0.188" to 0.000" | 0000000 | 000000 |
Ultra-Chemical-Resistant High-Strength PTFE Gasket Material

Made of PTFE with a fiberglass filler to provide strength and prevent these sheets from thinning out when compressed. They resist hydrocarbons, solvents, refrigerants, and moderate concentrations of acids. Cut with a utility knife or gasket cutter.
For technical drawings and 3-D models, click on a part number.
Ultra-Chemical-Resistant High-Strength PTFE Pipe Gaskets

Reinforced with fiberglass filler for strength, these PTFE gaskets won’t thin out when compressed. They resist hydrocarbons, solvents, refrigerants, and moderate concentrations of acids. Also known as ring gaskets, use them with raised-surface pipe flanges; they fit the surface inside the bolt holes and do not interfere with the bolt connection. All gasket specifications are sized to meet ANSI standards. Gaskets for ANSI Class 150 flanges are compatible with low-pressure pipe flanges. Gaskets for ANSI Class 300 flanges are compatible with medium-pressure pipe flanges.
For technical drawings and 3-D models, click on a part number.
For Pipe Size | ID | OD | Thick. | Max. Pressure, psi | Temperature Range, °F | Color | Each | |
For ANSI Class 150 | ||||||||
---|---|---|---|---|---|---|---|---|
1/2 | 27/32" | 1 7/8" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 00000 |
3/4 | 1 1/16" | 2 1/4" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 0000 |
1 | 1 5/16" | 2 5/8" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 0000 |
1 1/4 | 1 21/32" | 3" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 0000 |
1 1/2 | 1 29/32" | 3 3/8" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 0000 |
2 | 2 3/8" | 4 1/8" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 00000 |
2 1/2 | 2 7/8" | 4 7/8" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 00000 |
3 | 3 1/2" | 5 3/8" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 00000 |
4 | 4 1/2" | 6 7/8" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 00000 |
5 | 5 9/16" | 7 3/4" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 00000 |
6 | 6 5/8" | 8 3/4" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 00000 |
8 | 8 5/8" | 11" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 00000 |
10 | 10 3/4" | 13 3/8" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 00000 |
12 | 12 3/4" | 16 1/8" | 1/16" | 800 | -450° to 500° | Blue | 0000000 | 000000 |
For ANSI Class 300 | ||||||||
1 | 1 5/16" | 2 7/8" | 1/16" | 800 | -450° to 500° | Blue | 00000000 | 0000 |
1 1/2 | 1 29/32" | 3 3/4" | 1/16" | 800 | -450° to 500° | Blue | 00000000 | 0000 |
2 | 2 3/8" | 4 3/8" | 1/16" | 800 | -450° to 500° | Blue | 00000000 | 00000 |
2 1/2 | 2 7/8" | 5 1/8" | 1/16" | 800 | -450° to 500° | Blue | 00000000 | 00000 |
3 | 3 1/2" | 5 7/8" | 1/16" | 800 | -450° to 500° | Blue | 00000000 | 00000 |
4 | 4 1/2" | 7 1/8" | 1/16" | 800 | -450° to 500° | Blue | 00000000 | 00000 |
6 | 6 5/8" | 9 7/8" | 1/16" | 800 | -450° to 500° | Blue | 00000000 | 00000 |
Ultra-Chemical-Resistant High-Strength PTFE Pipe Gaskets with Bolt Holes

A fiberglass filler in these PTFE gaskets provides strength to prevent them from thinning out when compressed. They resist hydrocarbons, solvents, refrigerants, and moderate concentrations of acids. Commonly called full-face gaskets, they cover the entire face of flat-surface pipe flanges and align with the bolt holes. All gasket specifications are sized to meet ANSI standards. Gaskets for ANSI Class 150 flanges are compatible with low-pressure pipe flanges. Gaskets for ANSI Class 300 flanges are compatible with medium-pressure pipe flanges.
For technical drawings and 3-D models, click on a part number.
For Pipe Size | ID | OD | Thick. | No. of Bolt Holes | Max. Pressure, psi | Temperature Range, °F | Color | Each | |
For ANSI Class 150 | |||||||||
---|---|---|---|---|---|---|---|---|---|
1/2 | 27/32" | 3 1/2" | 1/16" | 4 | 800 | -450° to 500° | Blue | 0000000 | 00000 |
3/4 | 1 1/16" | 3 7/8" | 1/16" | 4 | 800 | -450° to 500° | Blue | 0000000 | 0000 |
1 | 1 5/16" | 4 1/4" | 1/16" | 4 | 800 | -450° to 500° | Blue | 0000000 | 00000 |
1 1/4 | 1 21/32" | 4 5/8" | 1/16" | 4 | 800 | -450° to 500° | Blue | 0000000 | 00000 |
1 1/2 | 1 29/32" | 5" | 1/16" | 4 | 800 | -450° to 500° | Blue | 0000000 | 00000 |
2 | 2 3/8" | 6" | 1/16" | 4 | 800 | -450° to 500° | Blue | 0000000 | 00000 |
2 1/2 | 2 7/8" | 7" | 1/16" | 4 | 800 | -450° to 500° | Blue | 0000000 | 00000 |
3 | 3 1/2" | 7 1/2" | 1/16" | 4 | 800 | -450° to 500° | Blue | 0000000 | 00000 |
3 1/2 | 4" | 8 1/2" | 1/16" | 8 | 800 | -450° to 500° | Blue | 0000000 | 00000 |
4 | 4 1/2" | 9" | 1/16" | 8 | 800 | -450° to 500° | Blue | 0000000 | 00000 |
5 | 5 9/16" | 10" | 1/16" | 8 | 800 | -450° to 500° | Blue | 0000000 | 00000 |
6 | 6 5/8" | 11" | 1/16" | 8 | 800 | -450° to 500° | Blue | 0000000 | 00000 |
8 | 8 5/8" | 13 1/2" | 1/16" | 8 | 800 | -450° to 500° | Blue | 0000000 | 00000 |
10 | 10 3/4" | 16" | 1/16" | 12 | 800 | -450° to 500° | Blue | 0000000 | 000000 |
12 | 12 3/4" | 19" | 1/16" | 12 | 800 | -450° to 500° | Blue | 0000000 | 000000 |
For ANSI Class 300 | |||||||||
1 | 1 5/16" | 4 7/8" | 1/16" | 4 | 800 | -450° to 500° | Blue | 00000000 | 00000 |
1 1/2 | 1 29/32" | 6 1/8" | 1/16" | 4 | 800 | -450° to 500° | Blue | 00000000 | 00000 |
2 | 2 3/8" | 6 1/2" | 1/16" | 8 | 800 | -450° to 500° | Blue | 00000000 | 00000 |
2 1/2 | 2 7/8" | 7 1/2" | 1/16" | 8 | 800 | -450° to 500° | Blue | 00000000 | 00000 |
3 | 3 1/2" | 8 1/4" | 1/16" | 8 | 800 | -450° to 500° | Blue | 00000000 | 00000 |
4 | 4 1/2" | 10" | 1/16" | 8 | 800 | -450° to 500° | Blue | 00000000 | 00000 |
6 | 6 5/8" | 12 1/2" | 1/16" | 12 | 800 | -450° to 500° | Blue | 00000000 | 00000 |
High-Speed Piston Seals



PTFE gives these seals a slippery surface that allows rod speeds more than two times faster than our other piston seals.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | O-Ring | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Bore Dia. | Dia. | Wd. | O-Ring Dash Number Equivalent | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Hardness | Color | Specifications Met | Each | |
Glass-Filled PTFE Plastic with Buna-N Rubber O-Ring | |||||||||||||
1/2" | 0.240" | 0.083" | 010 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 00000 |
3/4" | 0.490" | 0.083" | 014 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
7/8" | 0.615" | 0.083" | 016 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
1" | 0.740" | 0.083" | 018 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
1 1/4" | 0.990" | 0.083" | 022 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
1 1/2" | 1.241" | 0.083" | 025 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
2" | 1.604" | 0.129" | 129 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
2 1/4" | 1.858" | 0.129" | 133 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
2 1/2" | 2.108" | 0.129" | 137 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
3" | 2.608" | 0.129" | 145 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
3 1/4" | 2.858" | 0.129" | 149 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
3 1/2" | 3.108" | 0.129" | 151 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
4" | 3.608" | 0.129" | 153 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Gold | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
High-Stability High-Speed Piston Seals



A square O-ring prevents these piston seals from rocking in the groove. They have a slippery PTFE surface that allows rod speeds more than two times faster than our other piston seals.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | O-Ring | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Bore Dia. | Dia. | Wd. | O-Ring Dash Number Equivalent | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Hardness | Color | Specifications Met | Each | |
Glass-Filled PTFE Plastic with Buna-N Rubber O-RIng | |||||||||||||
1" | 0.692" | 0.129" | 115 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 00000 |
1 1/4" | 0.942" | 0.129" | 119 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
1 1/2" | 1.192" | 0.129" | 123 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
1 3/4" | 1.443" | 0.129" | 127 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
2" | 1.693" | 0.129" | 131 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
2 1/4" | 1.943" | 0.129" | 135 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
2 1/2" | 2.193" | 0.129" | 139 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
3" | 2.445" | 0.284" | 333 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
3 1/4" | 2.695" | 0.284" | 335 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
3 1/2" | 2.945" | 0.284" | 337 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
4" | 3.445" | 0.284" | 341 | 12 | 8,500 | -30° to 230° | Durometer 60D (Extra Hard) | Blue | Durometer 70A (Hard) | Black | ANSI B93.32, NFPA T3.19.18 | 0000000 | 0000 |
High-Pressure Piston Seals



Rated for pressure up to 10,000 psi, these seals withstand the highest pressure of our piston seals. They have two high-strength backup rings that protect against extrusion.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | O-Ring | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Bore Dia. | Dia. | Wd. | O-Ring Dash Number Equivalent | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Hardness | Color | Each | |
Glass-Filled PTFE Plastic with Nylon Plastic Backup Ring and Buna-N Rubber O-Ring | ||||||||||||
2" | 1.625" | 0.424" | Not Rated | 5 | 10,000 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 000000 |
2 1/2" | 2.125" | 0.424" | Not Rated | 5 | 10,000 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
3" | 2.520" | 0.579" | Not Rated | 5 | 10,000 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
3 1/2" | 3.020" | 0.579" | Not Rated | 5 | 10,000 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
4" | 3.520" | 0.579" | Not Rated | 5 | 10,000 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |