51 Products

Use these sleeves alone or with gloves to protect your arms.

Polyethylene sleeves offer economical protection in environments where abrasion resistance is not a concern. They resist liquid splashes, but are not recommended for continuous liquid exposure. Use the metal-detectable sleeves around food processing plants while reducing the risk of contaminating the food. To help you comply with Hazard Analysis and Critical Control Point (HACCP) programs, they contain metal additives that will set off metal detectors if they—or any piece of them—fall into your line. They’re also blue, making them easy to spot. They are FDA compliant for direct contact with food.

The coating on these gloves provides extra protection without limiting dexterity. It also provides a secure grip.

Nylon gloves are form fitting and offer good dexterity. Nylon/spandex blend gloves are flexible and stretch for a close fit.

Palm-coated gloves have an uncoated back side that makes the gloves more comfortable and breathable. Textured-surface gloves provide a better grip than smooth gloves.

Nitrile-coated gloves are more durable than latex-coated gloves and provide chemical as well as oil resistance. They are a good alternative for those concerned about latex allergies.

Use gloves with knit cuffs for a secure fit.

These gloves have a metal additive that will set off metal detectors if they fall into your line, so you can safely handle food and tools in a sanitary facility. They help you comply with Hazard Analysis and Critical Control Point (HACCP) programs for preventing contaminated food from leaving your facility. They’re also bright blue, which makes them easy to find and retrieve.

Fully coated in nitrile, these gloves are oil and chemical resistant, so they won’t break down from fatty foods or harsh cleaners. Nitrile is a good alternative for those with latex allergies—it’s also more durable than latex. The textured surface helps you grip tools and work surfaces, and the seamless cotton lining keeps you comfortable. These gloves meet EN 388 (3121), which means they protect you from abrasive surfaces and provide light protection against cuts, tears, and punctures. They also meet German food standard 31 LFGB, which means they are compliant with European regulatory requirements and free of toxic substances.

Protect your arm from stains, sparks, and abrasions. Use these sleeves alone or with gloves.

Denim sleeves are more durable and abrasion resistant than cotton and cotton terry sleeves.

Protect your shirt sleeves from stains and wear in food-processing environments. Since these sleeves contain metal and chemical additives that will get picked up by metal detectors and X-ray machines if they fall into your line, they help you comply with Hazard Analysis and Critical Control Point (HACCP) programs. They’re also bright blue, so they’re easily seen and removed if they end up in a batch.

Made of TPU plastic, these sleeves are tear resistant and flexible, even in cold temperatures. They resist chemicals and oil, so they’re commonly used with vegetable oil and animal fat. Sleeves are machine washable.

Protect your hands from oil, acids, and scrapes while you’re working.

Nitrile gloves withstand deterioration from petroleum products and solvents such as alcohol.

Neoprene-coated latex gloves have a multi-layer construction that provides better protection against tears and pinholes than most single-layer gloves. Suitable for light duty jobs, they deteriorate faster than neoprene gloves.

Metal-detectable gloves have an additive that sets off metal detectors if they fall into your line. They’re also bright blue, so they’re easy to find and remove. They help you comply with Hazard Analysis and Critical Control Point (HACCP) programs to keep contaminated food from leaving your facility.

Wear-indicating gloves have a yellow, blue, or red inner layer that shows through as the coating wears off, making it easy to inspect for cracks, pinholes, and other signs of wear.

Textured-surface gloves provide a better grip than smooth gloves.

Gloves without a lining offer the best dexterity. Gloves with a flocked cotton fiber lining are easy to take on and off. Gloves with a cotton fabric lining and fleece fabric lining absorb perspiration.

Often used for cleaning lab spaces, these gloves withstand most acids, alcohols, and cleaning solutions. They also resist abrasion and offer good dexterity.

Food-service gloves are made of FDA listed materials for use with food.

Textured-surface gloves provide a better grip than smooth gloves.

Gloves without a lining offer the best dexterity. Gloves with a cotton fabric lining absorb perspiration.

The coating on these gloves provides extra protection and wear resistance. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.

Dyneema gloves are thinner, more breathable, and more form fitting than Kevlar gloves.

Palm-coated gloves have an uncoated back side that makes the gloves more comfortable and breathable. Polyurethane-coated gloves offer good tactility for precision handling and delicate tasks.

Style A provide cut protection without hindering dexterity. A textured surface provides added grip. For a secure fit, they have a knit cuff.

The lining withstands intermittent heat, while the outer layer of material acts as a barrier to chemicals and solvents. All of these gloves have a textured surface on the fingers and palm for added grip.

Neoprene gloves with a cotton or fleece lining handle higher temperatures than nitrile/neoprene gloves, but they’re also thicker. They’re FDA compliant for use with food.

Used in firefighting and similar severe duty applications, these fire-retardant gloves meet OSHA, CAL-OSHA, and NFPA requirements. Flexible and durable, they protect your hands in high-temperature applications. Holding heavy objects may decrease temperature rating.

Cowhide gloves remain soft after repeated soakings.

Keep hands warm in temperatures as low as -320° F without sacrificing dexterity. Also known as cryogenic gloves, these can be used to handle dry ice. They also have a breathable moisture-wicking liner.

Use gloves with knit cuffs for a secure fit. Gloves with open cuffs are more convenient to put on and take off than other gloves.

Wear these gloves to keep your hands dry and warm at temperatures as low as -320° F. Also known as cryogenic gloves, they have a multi-layered nylon construction for thermal insulation at extremely low temperatures and a seamless water-resistant liner to protect from spills and splashes. They’re often used to handle samples stored in dry ice and to dispense liquid nitrogen. However, they’re not meant to be completely submerged in liquid nitrogen. A breathable inner lining wicks moisture away from your skin for dry, comfortable wear over long periods. The coated palm makes it easier to grip small objects, transfer samples, and open jars. These gloves meet European safety and performance standards for protective gloves.

Gloves with a knit cuff fit snugly and securely around your wrist.

Gloves with an open cuff are easier to slide on and off than gloves with knit cuffs.

The accordion design prevents the sleeve from collapsing and allows more air circulation. For applications that require frequent glove changes, the sleeves stay connected to the glove box so you can quickly change the size or type of glove being used. Use these gloves in glove boxes to safely handle hazardous substances or avoid contaminating sensitive materials. They fit 8" diameter glove box access holes. Attach gloves to sleeves using the included sleeve-to-glove connecting spring clamp and sleeve-to-glove connecting ring clamp. Attach sleeves to a glove box using glove box mounting clamps (sold separately).

Nitrile gloves have good resistance to punctures, solvents, oils, and greases.

Keep your gloves close at hand. These clips have a safety breakaway feature to prevent wearers from getting snagged by equipment.

Attach clip-on glove clips around belt loops or directly to clothing. Those with a ball-and-socket safety breakaway rotate as you move, allowing the clip and gloves to stay in place. They also have large jaws, which can hold large gloves.

Slip slide-on glove clips over belts, waistbands, and pockets. They hold gloves in a higher position than the clip-on clips, which helps keep them from moving around.