The coating on these gloves provides extra protection without limiting dexterity. It also provides a secure grip.

Nylon gloves are form fitting and offer good dexterity.

Palm-coated gloves have an uncoated back side that makes the gloves more comfortable and breathable. Polyurethane-coated gloves are thin and lightweight. They're good for assembly work, small parts handling, and other jobs where a sensitive touch and precise handling are essential.

Use gloves with knit cuffs for a secure fit.

Comfortable and flexible, these fabric gloves are good for parts handling, maintenance, fabrication, and other general purpose applications.

Cotton and cotton/polyester blend gloves are as breathable as a T-shirt and can be comfortably worn for long periods of time.

Cotton jersey gloves are as soft and comfortable as a sweatshirt.

Gloves with grip have a textured surface on one or both sides that provides a secure grip. Full grip gloves are ambidextrous and can be worn on either hand for convenience or to extend use when the grip on one side wears down.

Keep fingerprints and other contaminants off of parts during inspections.

Cotton gloves are soft and comfortable.

Nylon gloves are stretchable and more form fitting than standard cotton inspection gloves.

Gloves with open cuffs are more convenient to put on and take off than other gloves. Use gloves with knit cuffs for a secure fit.

Use these sleeves alone or with gloves to protect your arm from oils and most acids.

Nitrile-coated polyester sleeves are the best choice for handling petroleum-based substances such as gasoline and xylene. They have a nitrile coating on the inside and outside.

These gloves are commonly used in meat packing and other food-service environments. Made of interwoven fabric and stainless steel fibers, they offer cut protection without sacrificing dexterity. All of these gloves meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade. Gloves are sold individually (order two for a pair).

Wear these liners under gloves for added protection from cuts and punctures. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.

Designed for intermittent handling of hot pipes, engine parts, and castings, these gloves protect your hands from moderate heat and some abrasion. Holding heavy objects may decrease temperature rating.

Cotton terry gloves absorb moisture and have an outer layer that dissipates heat.

Use gloves with knit cuffs for a secure fit. Gloves with open cuffs are more convenient to put on and take off than other gloves.

Protect your hands from intermittent exposure to extreme heat during jobs such as metal forging and glass manufacturing. Holding heavy objects may decrease temperature rating.

Zetex and Zetex Plus gloves protect hands from exposure to nearby flames and heat.

Wear these form-fitting liners under gloves and mitts to seal in warm air and wick away moisture.

Cleaned and bagged in environments with low levels of particulates, these powder-free, unlined gloves won't contaminate your work area. They’re suitable for use in clean rooms rated to both Federal Standard and ISO classes. In both systems, clean rooms with lower class ratings have fewer contaminants.

Chemical-resistant gloves protect against incidental chemical contact such as spills and splashes.

Nitrile gloves are a good alternative for those concerned about latex allergies.

Textured-surface gloves provide a better grip than smooth gloves.

Protect objects in your clean room from skin oil and other contaminants when dexterity is essential and full hand coverage is not needed. Cleaned and bagged in clean environments, these powder-free, unlined cots won't contaminate your work area.

Static-control cots minimize the buildup of electrostatic charge to protect sensitive equipment from damage. The lower the surface resistivity, the faster and more effectively cots drain electrical charge.

Nitrile cots are a good alternative for those concerned with latex allergies.

Seamless one-piece construction provides maximum strength and integrity. Use these gloves in dry boxes to safely handle hazardous substances or avoid contaminating sensitive materials. Attach them to a dry box using the sleeve-to-dry box mounting clamp set (sold separately). They fit 8" diameter dry box access holes.

Nitrile gloves have good resistance to punctures, solvents, oils, and greases.

Polyethylene gloves stand up to ozone and many oxidizing chemicals. They also have a high level of abrasion resistance.

The accordion design prevents the sleeve from collapsing and allows more air circulation. For applications that require frequent glove changes, the sleeves stay connected to the dry box so you can quickly change the size or type of glove being used. Use these gloves in dry boxes to safely handle hazardous substances or avoid contaminating sensitive materials. They fit 8" diameter dry box access holes. Attach gloves to sleeves using the included sleeve-to-glove connecting spring clamp and sleeve-to-glove connecting ring clamp. Attach sleeves to a dry box using the sleeve-to-dry box mounting clamp set (sold separately).

Nitrile gloves have good resistance to punctures, solvents, oils, and greases.

Keep gloves accessible and ready to use. Gloves are sold separately.