Because this cement won't break down when exposed to corrosive waste, it's often used on plastic pipe fittings in laboratories.

When appearance is important, this cement dries clear and forms strong bonds on acrylic.

This cement has excellent temperature resistance for sealing insulation joints on ovens and furnaces.

Even when used under water, these adhesives maintain their strength.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

Bond most materials without the strong odor of other epoxy adhesives.

These self-extinguishing epoxies meet UL 94 V-0 for flame retardance.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.

With excellent shear strength, these acrylics form bonds at least 25% stronger than standard acrylic structural adhesives.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

Accommodate joint movement with these adhesives that remain pliable when cured.

These adhesives withstand temperatures of 390° F or more.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene.

In especially damp or humid environments, these adhesives keep their hold.

Use these adhesives in applications that are highly sensitive to contaminants.

Bond plastics, porous materials, or dirty surfaces.

These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

Form bonds without the strong odor of other instant-bond adhesives.

For easy positioning, these adhesives begin to harden only when exposed to light.

Invisibly bond glass and transparent plastics.

Bonds reach full strength in 10 minutes.

These adhesives resist temperatures up to 500° F.

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

For easy positioning, this adhesive remains tacky for hours. Once items are in place, apply pressure to create a permanent bond.

These spray glues adhere quickly.

The 3M VHB adhesive on these rolls offers a strong hold that can replace rivets, spot welds, and other permanent fasteners.

This silicone glue withstands temperatures up to 500° F.

This general purpose glue tackles a variety of repairs.

Pull off a small piece of putty and stick lightweight objects to a surface.

Bond both soft and hard wood.

This glue withstands temperatures up to 500° F.

This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.

Bond glass and stone to drywall, treated lumber, and subfloors.

Install vinyl and rubber treads on stairs with this adhesive.

Bond carpeting, vinyl tile, and other floor coverings to subfloors.

Install foam insulation, drywall, and paneling with these adhesives.

The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.

When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds.

These kits include adhesives, applicators, and mixer nozzles.

These adhesives maintain their strength at temperatures up to 250° F.

Tack wires to coil forms or secure and insulate hardware on printed circuit boards. These adhesives require an accelerator.

Improve instant-bond adhesive performance on hard-to-bond materials.

To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.

Add these tiny glass spacers to structural and instant-bond adhesives to keep adhesive from squeezing out during clamping.

Only for use with 3M dual cartridges, these guns dispense two-part adhesives.

Fill these cartridges with the two-part adhesive of your choice.

Adapt a standard caulk gun to dispense two-part adhesives from 1.69-oz. cartridges.

Use these plungers with a 3M dispensing gun for adhesives in dual cartridges.

Thread these holders onto a gun to hold an adhesive cartridge.

A quick disconnect bayonet connection attaches these holders to a gun to hold an adhesive cartridge in place.

Attach these nozzles to a cartridge for controlled dispensing.

Dispense up to 3 times as much adhesive per hour as our standard hot-melt glue guns.

A motor advances the glue stick for a continuous flow of glue.

These guns use polyurethane hot-melt cartridges for stronger bonds than other hot-melt adhesives.

Butane power makes these guns completely portable.