For flexible bonds that resist cracking, these adhesives stay pliable.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

For invisible bond lines, these adhesives dry clear.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

To keep these adhesives from squeezing out during clamping and give a consistent bond thickness, they're mixed with small glass beads.

Apply this glue like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

When appearance is important, this cement dries clear and forms strong bonds on acrylic.

Use these primers with structural epoxies, acrylics, and urethanes to promote bonding to EPDM rubber, polyolefin, and thermoplastic elastomers.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

These sealants don't degrade in sunlight.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.