Fasten hard-to-bond plastics, such as polypropylene and polyethylene.

Form bonds in 5 seconds or less.

These adhesives withstand temperatures of 390° F or more.

In especially damp or humid environments, these adhesives keep their hold.

Form bonds without the strong odor of other instant-bond adhesives.

Bond plastics, porous materials, or dirty surfaces.

These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.

These thin liquids, also known as super glue, flow into small gaps.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

Moisture, humidity, and immersion in water won't degrade the bond of these adhesives.

Invisibly bond glass and transparent plastics.

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

Even when used under water, these adhesives maintain their strength.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

These machinable epoxies are mixed with metal so they can be used to repair cracks and threaded holes.

Bond most materials without the strong odor of other epoxy adhesives.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds.

Also known as Gorilla Glue, this glue expands to form stronger bonds than other glue.

The 3M VHB adhesive on these rolls offers a strong hold that can replace rivets, spot welds, and other permanent fasteners.

Temporarily stabilize objects on flat surfaces with this clear, reusable adhesive.

This glue withstands temperatures up to 500° F.

These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.

Form bonds with twice the strength of our other spray adhesives.

These adhesives resist temperatures up to 500° F.

To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.

Withstand demanding, high-vibration applications such as motor and pump housings with these threadlockers.

Secure threaded fasteners at temperature extremes—from -300° F to 2100° F.

These threadlockers develop usable strength within one hour. Because they harden quickly on most metals, they don't require a primer.

These threadlockers meet NSF/ANSI 61 for drinking water.

This thick paste withstands temperatures up to 650 °F.

These threadlockers hold securely but stay flexible, so fasteners can be adjusted, removed, or reused.

These threadlockers withstand temperatures up to 450° F.

Apply these threadlockers on fasteners that are already installed—their thin consistency allows them to flow into small gaps.

Fill gaps up to 0.01" to secure unthreaded cylindrical metal parts such as shafts, bearings, and press-fit assemblies.

Even on oily surfaces, these retaining compounds keep their hold.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Make temporary waterproof seals that peel off when no longer needed.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.

The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Make tough, flexible, oil-resistant seals.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Formulated to flow into small spaces, use these sealants between fine threads.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Apply these thread sealant sticks without a mess.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media.

For use in refrigeration systems and applications exposed to strong chemicals, these sealants have excellent solvent resistance.

This tape has a higher density than standard tape for a better seal between threads.

This tape contains nickel to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.