Foam Glue | McMaster-Carr

Choose a Category

Clear All

	Container Type Container Type


Aerosol Can	Bottle

Brush-Top Bottle	Brush-Top Can

Can	Cartridge

Jug	Roll

Spray Bottle	Syringe

Tube

	For Use On For Use On	Show

Foam

	For Use On For Use On	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	For Joining For Joining

	Color Color

	Clear		Beige
	Black		White
	Off-White		Blue
	Orange		Purple

	Manufacturer Manufacturer

Liquid Nails

Loctite®

Pliobond

	Manufacturer Model Number Manufacturer Model Number

	Type Type

Adhesive

Primer

	Adhesive Type Adhesive Type

	Consistency Consistency

	Formulation Formulation

	Container Size Container Size

	Cure Type Cure Type

Room Temperature

	Maximum Temperature Maximum Temperature

Less than 500° F

Not Rated

	Minimum Temperature Minimum Temperature

	Clarity Clarity

Clear

Semi-Clear

Opaque

	Begins to Harden Begins to Harden

	Mixing Required Mixing Required

	Reaches Full Strength Reaches Full Strength

	Shear Strength Shear Strength

Less than 1,000 lbs./sq.
in.

1,000 to 1,999 lbs./sq.
in.

2,000 to 2,999 lbs./sq.
in.

3,000 to 3,999 lbs./sq.
in.

Not Rated

	Viscosity Viscosity

	Peel Strength Peel Strength

10 lbs./in. wd.

26 lbs./in. wd.

Not Rated

	Elongation Elongation

400%

Not Rated

	Approximate Coverage Approximate Coverage

View catalog pages (8)

Forward

How can we improve?

54 Products

About Structural Adhesives

Also known as super glue, these adhesives bond quickly. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
401	0.1	Tube	0.005"	15 sec.	24 hrs.	Thin Liquid (110 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
401	0.7	Bottle	0.005"	15 sec.	24 hrs.	Thin Liquid (110 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
401	16	Bottle	0.005"	15 sec.	24 hrs.	Thin Liquid (110 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000
4471	0.7	Bottle	0.008"	15 sec.	24 hrs.	Thin Liquid (630 cP)	-65° to 180°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
4471	16	Bottle	0.008"	15 sec.	24 hrs.	Thin Liquid (630 cP)	-65° to 180°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000

Instant-Bond Adhesive Gel for Hard-to-Bond Materials

Quickly adhere hard-to bond surfaces with these adhesives, also known as super glue. These thick gels fill gaps between parts and won't drip on vertical surfaces. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

Dispense adhesives in syringes with a plunger (sold seperately).

Dispense adhesives in cartridges with a standard caulk gun.

454 and 4541 are suitable for porous and dissimilar materials.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
454	0.1	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	0.3	Syringe	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	0.7	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	1	Syringe	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
454	7	Tube	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000
454	10.5	Cartridge	0.01"	15 sec.	24 hrs.	Gel (29,000 cP)	-65° to 250°	Clear	Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000

Wicking Instant-Bond Adhesives

These thin liquids, also known as super glue, flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
406	0.1	Tube	0.004"	15 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
406	0.7	Bottle	0.004"	15 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	00000
406	16	Bottle	0.004"	15 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 250°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000

Quick-Set Wicking Instant-Bond Adhesives

For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives. Also known as super glue, they have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
4501	0.7	Bottle	0.004"	5 sec.	24 hrs.	Thin Liquid (20 cP)	-65° to 180°	Clear	Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood	00000000	000000

Glue

Use these glues for general purpose bonding and repairs.

3M glue cannot be sold to California due to local regulatory limits on VOCs (volatile organic compounds).

3M Glue in Aerosol Cans

Each

Mfr. Model No.	Container Size, oz.	Begins to Harden	Reaches Full Strength	Max. Temp., °F	Color	For Joining	Cannot Be Sold To		Each
24	13.8	30 sec.	24 hrs.	170°	Orange	Foam	CA	00000000	00000

Package

Mfr. Model No.	Container Size, oz.	Begins to Harden	Reaches Full Strength	Max. Temp., °F	Color	For Joining	Cannot Be Sold To	Pkg. Qty.		Pkg.
24	13.8	30 sec.	24 hrs.	170°	Orange	Foam	CA	12	00000000	000000

Glue-on-a-Roll

Apply this glue like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape, these rolls have a thin film of pressure-sensitive glue on a peel-away liner. They are thinner and more conformable than tape with adhesive on both sides.

467MP and 468MP resist solvents and UV rays.

3M Glue
Mfr. Model No.	Wd.	Lg., yd.	Thick.	Temp. Range, °F	Color	For Joining		Each
468MP	1/2"	60	0.005"	-40° to 300°	Clear	Cardboard, Ceramic, Composites, Foam, Glass, Metal, Plastic, Wood	0000000	000000
468MP	1"	60	0.005"	-40° to 300°	Clear	Cardboard, Ceramic, Composites, Foam, Glass, Metal, Plastic, Wood	0000000	00000

Glue-on-a-Roll for Dispensing Guns

Designed for use with 3M dispensing guns, these rolls have a thin film of pressure-sensitive glue on a peel-away liner. They are thinner and more conformable than tape with adhesive on both sides. Also known as adhesive transfer tape.

928 has a permanent adhesive on one side and a removable adhesive on the other.

3M Glue
Mfr. Model No.	For 3M Gun Model No.	Wd.	Lg., yd.	Thick.	Max. Temp., °F	Color	For Joining		Each
928	ATG700	1/2"	18	0.002"	120°	White	Foam	00000000	00000
928	ATG700	3/4"	18	0.002"	120°	White	Foam	00000000	00000

ATG700 Dispensing Gun

0000000

Each

000000

Contact Adhesives

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

Black adhesive works especially well on foam insulation.

Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

	Container
Mfr. Model No.	Size	Type	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Consistency	Viscosity, cP	Temp. Range, °F	Color	For Joining	Cannot Be Sold To	For Joining		Each
3M Adhesives
1099	5 oz.	Tube	40 min.	72 hrs.	3,405	Thick Liquid	3,000	-10° to 230°	Beige	Fabric, Foam, Plastic, Rubber	__	Fabric, Foam, Plastic, Rubber	00000000	000000
1099	32 oz.	Can	40 min.	72 hrs.	3,405	Thick Liquid	3,000	-10° to 230°	Beige	Fabric, Foam, Plastic, Rubber	__	Fabric, Foam, Plastic, Rubber	00000000	00000
1099	1 gal.	Can	40 min.	72 hrs.	3,405	Thick Liquid	3,000	-10° to 230°	Beige	Fabric, Foam, Plastic, Rubber	__	Fabric, Foam, Plastic, Rubber	00000000	000000
Pliobond Adhesives
35	8 oz.	Brush-Top Can	3 min.	14 days	1,200	Thick Liquid	6,500	-40° to 370°	Beige	Cardboard, Fabric, Foam, Wood	__	Cardboard, Fabric, Foam, Wood	0000000	00000
35	16 oz.	Can	3 min.	14 days	1,200	Thick Liquid	6,500	-40° to 370°	Beige	Cardboard, Fabric, Foam, Wood	__	Cardboard, Fabric, Foam, Wood	0000000	00000
35	32 oz.	Can	3 min.	14 days	1,200	Thick Liquid	6,500	-40° to 370°	Beige	Cardboard, Fabric, Foam, Wood	Los Angeles Area	Cardboard, Fabric, Foam, Wood	0000000	00000
35	1 gal.	Can	3 min.	14 days	1,200	Thick Liquid	6,500	-40° to 370°	Beige	Cardboard, Fabric, Foam, Wood	Los Angeles Area	Cardboard, Fabric, Foam, Wood	0000000	000000
Adhesives
__	4 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Fabric, Foam, Metal, Plastic, Rubber, Wood	__	Fabric, Foam, Metal, Plastic, Rubber, Wood	000000	00000
__	8 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Fabric, Foam, Metal, Plastic, Rubber, Wood	__	Fabric, Foam, Metal, Plastic, Rubber, Wood	000000	00000
__	16 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Fabric, Foam, Metal, Plastic, Rubber, Wood	__	Fabric, Foam, Metal, Plastic, Rubber, Wood	000000	00000
__	16 oz.	Brush-Top Can	3 min.	36 hrs.	Not Rated	Thick Liquid	Not Rated	-40° to 250°	Black	Foam, Masonry, Metal, Plastic, Rubber	__	Foam, Masonry, Metal, Plastic, Rubber	00000000	00000
__	32 oz.	Brush-Top Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Fabric, Foam, Metal, Plastic, Rubber, Wood	Los Angeles Area	Fabric, Foam, Metal, Plastic, Rubber, Wood	000000	00000
__	1 gal.	Can	2 min.	24 hrs.	Not Rated	Thin Liquid	1,200	-30° to 180°	Clear	Fabric, Foam, Metal, Plastic, Rubber, Wood	Los Angeles Area	Fabric, Foam, Metal, Plastic, Rubber, Wood	000000	00000

Quick-Set Contact Adhesives

Bonds reach full strength in 10 minutes. Apply this adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.

	Container
Mfr. Model No.	Size, gal.	Type	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Consistency	Viscosity, cP	Temp. Range, °F	For Joining	Color		Each
3M Adhesives
1000NF	1	Jug	60 sec.	10 min.	400	Thin Liquid	750	60° to 80°	Fabric, Foam, Wood	Purple	00000000	0000000

Spray Adhesives

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

												Each
Mfr. Model No.	Container Size, oz.	Approximate Coverage	Inverted Dispensing	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M Adhesives
74	16.9	26 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Clear	Fabric, Foam	CA	0000000	000000	000000
74	16.9	26 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Orange	Fabric, Foam	CA	0000000	00000	00000
74	16.9	26 sq. ft. @ 2.5 gm/ft²	Yes	30 sec.	24 hrs.	200	0° to 200°	Orange	Fabric, Foam	CA	00000000	00000	00000
74CA	19	29 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Clear	Fabric, Foam	__	0000000	00000	00000
74CA	19	29 sq. ft. @ 2.5 gm/ft²	No	30 sec.	24 hrs.	200	0° to 200°	Orange	Fabric, Foam	__	0000000	00000	00000
77	4.4	9 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	Clear	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	CA	0000000	0000	0000
77	13.44	21 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	Clear	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	CA	0000000	0000	0000
77	16.8	26 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	White	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	CA	0000000	00000	00000
77CA	18	28 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	Clear	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	__	0000000	00000	00000
78	17.9	28 sq. ft. @ 2.5 gm/ft²	No	60 sec.	24 hrs.	300	Not Rated to 180°	White	Foam	CA	0000000	00000	00000
78	17.9	28 sq. ft. @ 2.5 gm/ft²	Yes	60 sec.	24 hrs.	300	Not Rated to 180°	Clear	Foam	CA	00000000	00000	00000

Adhesives
Container Size, oz.	Approximate Coverage	Inverted Dispensing	Begins to Harden	Reaches Full Strength	Shear Strength	Temp. Range	Color	For Joining	Cannot Be Sold To		Each
12	19 sq. ft. @ 2.5 gm/ft²	No	1 sec.	24 hrs.	Not Rated	Not Rated	Beige	Fabric, Foam, Plastic, Rubber	CA	000000	00000

Pressure-Sensitive Spray Adhesives

For easy positioning, this adhesive remains tacky for hours. Once items are in place, apply pressure to create a permanent bond. The blue color shows where adhesive has been applied. They cannot be sold to California due to local regulatory limits on VOCs (volatile organic compounds).

											Each
Mfr. Model No.	Container Size, oz.	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear Strength	Max. Temp., ° F	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M Adhesives
72	17.3	27 sq. ft. @ 2.5 gm/ft²	60 sec.	24 hrs.	Not Rated	120°	Blue	Composites, Foam, Metal, Plastic, Rubber, Wood	CA	0000000	000000	000000

Construction Adhesives

Install building materials such as wood and drywall with these general purpose adhesives.

Silicone adhesives resist a wider range of temperatures than latex adhesives.

	Container					Strength
Mfr. Model No.	Size	Type	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Consistency	Temp. Range, °F	Color	For Use Outdoors	For Joining		Each
Liquid Nails Silicone Rubber Adhesives
LN-207	2.5 oz.	Tube	7 ft. @ 1/4" bead	20 min.	72 hrs.	105	10	Paste	-80° to 300°	Clear	Yes	Foam, Masonry, Plastic, Rubber	0000000	00000

Construction Adhesives for Interior Walls

Install foam insulation, drywall, and paneling with these water-resistant adhesives.

	Container					Strength
Mfr. Model No.	Size, oz.	Type	Approximate Coverage	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Consistency	Temp. Range, °F	Color	For Use Outdoors	For Joining		Each
Liquid Nails Adhesives
LN-604	10	Cartridge	30 ft. @ 1/4" bead	30 min.	7 days	400	Not Rated	Paste	20° to 120°	Off-White	Yes	Foam, Masonry, Wood	0000000	00000

Primers for Instant-Bond Adhesives

Improve instant-bond adhesive performance on hard-to-bond slippery plastics. These primers cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Primers in brush-top bottles also include a spray head for easy dispensing.

	Container
Mfr. Model No.	Size, oz.	Type	Drying Time, sec.	Consistency	Viscosity, cP	Color	Cannot Be Sold To		Each
Loctite® Primers
7701	1.75	Brush-Top Bottle, Spray Bottle	30	Thin Liquid	1	Clear	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	0000000	000000
770	1.75	Brush-Top Bottle, Spray Bottle	30	Thin Liquid	1	White	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	00000000	00000
770	16	Can	30	Thin Liquid	1	White	Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA	00000000	00000

Terms and Conditions and Privacy Policy