We will reply to your message within an hour.
More
Accommodate joint movement with these adhesives that remain pliable when cured.
For flexible bonds that resist cracking, these adhesives stay pliable.
For easy positioning, these adhesives begin to harden only when exposed to light.
Invisibly bond glass and transparent plastics.
Moisture, humidity, and immersion in water won't degrade the bond of these adhesives.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.
Even when used under water, these adhesives maintain their strength.
For invisible bond lines, these adhesives dry clear.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.
Bond most materials without the strong odor of other epoxy adhesives.
No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.
Also known as Gorilla Glue, this glue expands to form stronger bonds than other glue.
Apply this glue like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.
The 3M VHB adhesive on these rolls offers a strong hold that can replace rivets, spot welds, and other permanent fasteners.
Use these glue rolls with 3M dispensing guns.
Temporarily stabilize objects on flat surfaces with this clear, reusable adhesive.
This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.
Pull off a small piece of putty and stick lightweight objects to a surface.
This glue withstands temperatures up to 500° F.
These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.
When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds.
Remaining flexible after curing, these glue sticks accommodate joint movement.
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.
Form bonds with twice the strength of our other spray adhesives.
Bond glass and stone to drywall, treated lumber, and subfloors.
An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.
Often used on diesel engines, exhaust systems, and gas turbines, these adhesives withstand high temperatures and provide excellent electrical insulation.
Improve instant-bond adhesive performance on hard-to-bond materials.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
These sealants include a material certificate with traceable lot number, test report, and product shelf life.
Resistant to mold and mildew, these sealants are well suited to high-humidity environments.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
This sealant includes a material certificate with traceable lot number, test report, and product shelf life.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.
Made from silicone, these sealants are RTV (room-temperature vulcanizing). They combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
Mix a small amount of water-based paint with this caulk to match the color of your surface.
Press this adhesive-backed plastic tape into place for an immediate light-duty seal.
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
Also known as Torr Seal, this sealant forms a rigid bond that seals leaks on vacuum systems or components.
Prepare joints and surfaces to ensure proper sealant adhesion.
These sealants don't degrade in sunlight.
Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.
Press this pliable rope into place to hold glass in window frames and seal leaks.
Repair equipment and vehicle windows with these sealants that are rated to withstand impact within three hours of application.
Seal glass windows in metal and wood fire-rated doors.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
Prevent the edges of tape, signs, and graphics from peeling by sealing out water and debris.
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Use this kit to prevent bull's eye breaks and minor chips from getting bigger.
Dispense a uniform bead when you press the nozzle.
Use cartridges with a standard caulk gun for quick and easy dispensing.
These gasket makers combine the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement.
The thick consistency of these gasket makers creates a seal right away even before they harden. Press the nozzle to dispense a uniform bead.
Create a seal to get your machine back up and running in just two hours. These gasket makers have a thick consistency that creates a seal right away, even before they harden.
These gasket makers combine oil resistance and the flexibility to accommodate movement.
Create gaskets that can flex to accommodate movement and won’t degrade from oil.
With a standard caulk gun, quickly and easily make dense, rigid gaskets that won’t degrade from oil.
Form dense, rigid gaskets that won’t degrade in the presence of oil.
No mixing required—these potting compounds come ready to apply.
The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.
Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.
Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application.
Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics.
For strong bonds, clean and degrease surfaces before applying adhesives.
Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.
Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.
Quickly mount strain gauges to a test object—these adhesives create a strong, fatigue-resistant bond.
Spray these primers onto a mounting surface to quickly and smoothly apply signs, labels, and protective films.