We will reply to your message within an hour.
More
Also known as super glue, these adhesives bond quickly.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene.
Accommodate joint movement with these adhesives that remain pliable when cured.
Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.
Form bonds in 5 seconds or less.
These adhesives withstand temperatures of 390° F or more.
To invisibly bond transparent plastics, these adhesives won’t turn cloudy.
In especially damp or humid environments, these adhesives keep their hold.
Make strong, instant bonds on a variety of materials—but not your skin.
Form bonds without the strong odor of other instant-bond adhesives.
Use these adhesives in applications that are highly sensitive to contaminants.
Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.
Bond plastics, porous materials, or dirty surfaces.
These thick gels fill gaps up to 0.2" wide—the largest of any of our instant-bond adhesives.
These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.
For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives.
These thin liquids, also known as super glue, flow into small gaps.
These adhesives withstand temperatures up to 480° F.
For flexible bonds that resist cracking, these adhesives stay pliable.
For easy positioning, these adhesives begin to harden only when exposed to light.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.
Even when used under water, these adhesives maintain their strength.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.
These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.
Bond most materials without the strong odor of other epoxy adhesives.
With excellent shear strength, these acrylics form bonds at least 25% stronger than standard acrylic structural adhesives.
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
To keep these adhesives from squeezing out during clamping and give a consistent bond thickness, they're mixed with small glass beads.
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.
Temporarily stabilize objects on flat surfaces with this clear, reusable adhesive.
This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Form bonds with twice the strength of our other spray adhesives.
Bond glass and stone to drywall, treated lumber, and subfloors.
Install vinyl and rubber treads on stairs with this adhesive.
Bond and repair nosing and stair treads with this thick, two-part epoxy.
Adhere vinyl and rubber wall bases to wood, drywall, and concrete.
Improve instant-bond adhesive performance on hard-to-bond materials.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
These sealants include a material certificate with traceable lot number, test report, and product shelf life.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
Prepare joints and surfaces to ensure proper sealant adhesion.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.
Use these two-part fillers to rebuild cracked or worn plastic surfaces.
These adhesives come in a can.
Dispense a uniform bead when you press the nozzle.
Use cartridges with a standard caulk gun for quick and easy dispensing.
These gasket makers combine the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement.
The thick consistency of these gasket makers creates a seal right away even before they harden. Press the nozzle to dispense a uniform bead.
Create a seal to get your machine back up and running in just two hours. These gasket makers have a thick consistency that creates a seal right away, even before they harden.
These gasket makers combine oil resistance and the flexibility to accommodate movement.
Create gaskets that can flex to accommodate movement and won’t degrade from oil.