For Use On For Use On |
---|
For Joining For Joining |
---|
Type Type |
---|
|
Formulation Formulation | Show |
---|
|
Formulation Formulation | Hide |
---|
|
For Use With For Use With |
---|
Application Application |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
For Use Outdoors For Use Outdoors |
---|
|
Mixing Required Mixing Required |
---|
|
Hardness Rating Hardness Rating |
---|
|
Paintable Paintable |
---|
|
Tensile Strength Tensile Strength |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Maximum Application Temperature Maximum ApplicationTemperature |
---|
|
Minimum Application Temperature Minimum ApplicationTemperature |
---|
|
More
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint expansion/compression tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint expansion/compression tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Buna-N | ||||||||||||
4 | Tube | 10 min. | 24 hrs. | 1,000% | Not Rated | Not Rated | Soft (Durometer 25A) | -30° to 300° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | 0000000 | 00000 | |
10.3 | Cartridge | 10 min. | 24 hrs. | 600% | Not Rated | Not Rated | Soft (Durometer 30A) | -30° to 300° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | 0000000 | 0000 |
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re thicker than most non-sagging sealants, so they can be used in vertical joints up to 1/2" wide.
Elongation indicates flexibility—the higher the values are, the more sealants can stretch. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Tensile Strength | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Buna-N | |||||||||||
10.3 | Cartridge | 10 min. | 24 hrs. | 100% | Not Rated | Soft (Durometer 20A) | -30° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Aluminum | 0000000 | 000000 |
Keep out the elements by sealing roof joints. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Buna-N | ||||||||||||
10.3 | Cartridge | 30 min. | 3 days | Not Rated | Not Rated | Not Rated | Not Rated | Not Rated to 400° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Aluminum | 0000000 | 000000 |
Keep out the elements by sealing roof joints. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish. They're good for use in environments with wide temperature fluctuation.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Tensile Strength | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
Buna-N | |||||||||||
10.3 | Cartridge | 30 min. | 3 days | Not Rated | Not Rated | 40° to 100° | Not Rated to 400° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Aluminum | 0000000 | 00000 |