For Use On For Use On |
---|
Color Color |
---|
![]() | White | ![]() | Gray |
![]() | Yellow | ![]() | Yellow to Green- Blue |
Manufacturer Manufacturer |
---|
|
Type Type |
---|
|
Formulation Formulation | Show |
---|
|
Formulation Formulation | Hide |
---|
Minimum Temperature Minimum Temperature |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
For Use Outdoors For Use Outdoors |
---|
|
Clarity Clarity |
---|
|
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
---|
|
Maximum Thickness Maximum Thickness |
---|
|
Mix Ratio Mix Ratio |
---|
|
Manufacturer Model Name Manufacturer Model Name |
---|
|
For Maximum Crack Width For Maximum Crack Width |
---|
|
Length Length |
---|
|
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Bondo Body Filler | |||||||||||||
261 | 1 pt. | Can, Tube | 3 | 60 min. | Paste | 50:1 | 90 sq. in. @ 1/4" | -40° to 180° | Gray | Sand | Aluminum, Steel, Concrete, Fiberglass, Wood | 000000000 | 00000 |
262 | 1 qt. | Can, Tube | 3 | 60 min. | Paste | 50:1 | 180 sq. in. @ 1/4" | -40° to 180° | Gray | Sand | Aluminum, Steel, Concrete, Fiberglass, Wood | 000000000 | 00000 |
267 | 2 qt. | Can, Tube | 3 | 60 min. | Paste | 50:1 | 360 sq. in. @ 1/4" | -40° to 180° | Gray | Sand | Aluminum, Steel, Concrete, Fiberglass, Wood | 000000000 | 00000 |
Surface Fillers | |||||||||||||
__ | 8 oz. | Tube | 15 | 3 hrs. | Paste | 50:1 | Not Rated | -40° to 180° | Yellow to Green-Blue | Sand | Fiberglass | 0000000 | 00000 |
Replacement Hardener for Bondo Surface Fillers (0.8-oz. Tube) | 000000000 | Each | 00000 |
Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
Container | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Formulation | Size, oz. | Type | Begins to Harden, sec. | Reaches Full Strength, min. | Consistency | For Max. Crack Wd. | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Polyester | 3.5 | Tube | 1 | 3 | Putty | 1" | 24 sq. in. @ 1/4" | 1/2" | Yes | -40° to 220° | White | Drill, Sand, Tap | Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | 00000000 | 000000 |
An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. When exposed to sunlight or a UV lamp, they begin to harden immediately. Patches are waterproof.
Formulation | Lg. | Wd. | Begins to Harden, sec. | Reaches Full Strength, min. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Polyester | 6" | 3" | 1 | 50 | Yes | -40° to 350° | Yellow | Drill, Sand | Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Concrete | 0000000 | 00000 |