Filter by
Manufacturer Model Number
Container Type
Manufacturer
Paintable
Type
For Use Outdoors
Performance
Formulation
Hardness Rating
Primer Required for Use On
REACH
RoHS
Maximum Temperature
Container Size
Clarity
Mixing Required
Minimum Temperature
Begins to Harden
Export Control Classification Number (ECCN)
Manufacturer Model Name
DFARS Specialty Metals
Tensile Strength
Elongation
About Sealant Flexibility
More
Sealants

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Sika Sikaflex Polyurethane | |||||||||||||
221 | 10.1 | Cartridge | 60 min. | 3 days | 500% | -12.5% to 12.5% | 260 | Medium Soft (Durometer 40A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Plastic Plastic to Rubber Rubber Masonry | 000000 | 000000 |
Primer for Sika Sikaflex Polyurethane Sealants (3.4-oz Bottle) | 0000000 | Each | 000000 |