Container Type Container Type |
---|
![]() | Bottle |
Color Color |
---|
![]() | Purple |
Manufacturer Manufacturer |
---|
|
Manufacturer Model Number ManufacturerModel Number | Show |
---|
|
Manufacturer Model Number ManufacturerModel Number | Hide |
---|
For Maximum Thread Diameter For MaximumThread Diameter |
---|
|
Locking Strength Locking Strength |
---|
|
Type Type |
---|
|
Removal Method Removal Method |
---|
|
Cure Type Cure Type |
---|
|
Breakaway Torque Breakaway Torque |
---|
|
Begins to Harden Begins to Harden |
---|
|
Mixing Required Mixing Required |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Consistency Consistency |
---|
|
Clarity Clarity |
---|
|
Reaches Full Strength Reaches Full Strength |
---|
|
Formulation Formulation |
---|
|
Viscosity Viscosity |
---|
|
More
These threadlockers give a secure hold, but can be easily adjusted with hand tools. They can be removed without damaging countersunk fasteners, set screws, and other small fasteners. These threadlockers begin to harden once coated surfaces are threaded together and exposure to air is blocked.
Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes, and cadmium and zinc coatings.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Temp. Range, °F | For Max. Thread Dia. | Consistency | Viscosity, cP | Breakaway Torque, in.-lbs. | Color | Each | |
Low Locking Strength | ||||||||||||
Loctite® Threadlockers | ||||||||||||
222 | 0.34 | Bottle | 20 min. | 24 hrs. | -65° to 300° | 1/4" | Thin Liquid | 1,200 | 50 | Purple | 0000000 | 000000 |
222 | 1.69 | Bottle | 20 min. | 24 hrs. | -65° to 300° | 1/4" | Thin Liquid | 1,200 | 50 | Purple | 0000000 | 00000 |