Clear All
Manufacturer Manufacturer |
|---|
|
Manufacturer Model Number ManufacturerModel Number | Show |
|---|
|
Manufacturer Model Number ManufacturerModel Number | Hide |
|---|
Container Type Container Type |
|---|
 | Cartridge |
Container Size Container Size |
|---|
|
For Joining For Joining |
|---|
|
For Use On For Use On |
|---|
|
Reaches Full Strength Reaches Full Strength |
|---|
|
Type Type |
|---|
|
Formulation Formulation |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Begins to Harden Begins to Harden |
|---|
|
Cure Type Cure Type |
|---|
|
Consistency Consistency |
|---|
|
Shear Strength Shear Strength |
|---|
|
Mix Ratio Mix Ratio |
|---|
|
Elongation Elongation |
|---|
|
Peel Strength Peel Strength |
|---|
|
Adhesive Type Adhesive Type |
|---|
|
Approximate Coverage Approximate Coverage |
|---|
|
Clarity Clarity |
|---|
|
Mixing Required Mixing Required |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
About Structural Adhesives
More
Toughened Epoxy Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
3M Scotch-Weld Adhesives
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| DP420 | 1.69 | Cartridge | 20 min. | 24 hrs. | 2,500 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 000000 |
| DP420 | 1.69 | Cartridge | 20 min. | 24 hrs. | 2,690 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 0000000 | 00000 |
| DP420 | 6.76 | Cartridge | 20 min. | 24 hrs. | 2,500 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 000000 |
| DP420 | 6.76 | Cartridge | 20 min. | 24 hrs. | 2,690 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 00000000 | 000000 |
| DP420 | 13.5 | Cartridge | 20 min. | 24 hrs. | 2,500 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 00000000 | 000000 |
| DP420 | 13.5 | Cartridge | 20 min. | 24 hrs. | 2,690 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Black | Metal, Plastic, Composites | 00000000 | 000000 |
Mixer Nozzles, Plungers, and Dispensing Guns
| Each | ||
| Mixer Nozzle for 1.69-oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
| Mixer Nozzle for 1.69-oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
| Mixer Nozzle for 6.76-oz. and 13.5-oz. 3M Cartridges | 0000000 | 0000 |
| Replacement Plunger for 1.69-oz. 3M Cartridges | 0000000 | 00000 |
| Replacement Plunger for 6.76-oz. 3M Cartridges | 0000000 | 000000 |
| Dispensing Gun for 1.69-oz. 3M Cartridges | 0000000 | 000000 |
| Dispensing Gun for 6.76-oz. 3M Cartridges | 0000000 | 000000 |
| Dispensing Gun for 13.5-oz. 3M Cartridges | 00000000 | 000000 |
| Air-Powered Dispensing Gun for 1.69-oz. 3M Cartridges | 0000000 | 000000 |