Container Type Container Type |
---|
![]() | Cartridge |
For Use On For Use On |
---|
Color Color |
---|
![]() | Off-White |
Manufacturer Manufacturer |
---|
|
Manufacturer Model Number ManufacturerModel Number | Show |
---|
|
Manufacturer Model Number ManufacturerModel Number | Hide |
---|
Shear Strength Shear Strength |
---|
|
Formulation Formulation |
---|
|
Consistency Consistency |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Elongation Elongation |
---|
|
Adhesive Type Adhesive Type |
---|
|
Type Type |
---|
|
Begins to Harden Begins to Harden |
---|
|
Viscosity Viscosity |
---|
|
Container Size Container Size |
---|
|
Reaches Full Strength Reaches Full Strength |
---|
|
Cure Type Cure Type |
---|
|
Approximate Coverage Approximate Coverage |
---|
|
Connection Type Connection Type |
---|
|
Peel Strength Peel Strength |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Mixing Required Mixing Required |
---|
|
More
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP420NS, DP460NS, E-40HT, and 9462 are nonsagging, so they won't drip from vertical or overhead surfaces.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
E-40HT | 1.69 | Cartridge | 40 min. | 24 hrs. | 4,030 | Not Rated | 2:1 | Paste (430,000 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber | 0000000 | 000000 |