Filter by
Maximum Temperature
Type
Manufacturer
Color
For Use Outdoors
Mixing Required
Reaches Full Strength
Manufacturer Model Name
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Minimum Temperature
REACH
RoHS
Approximate Coverage @ Thickness
Clarity
Formulation
Mix Ratio
Manufacturer Model Number
Begins to Harden
Consistency
Large-Particle Abrasion-Resistant Surface Fillers for Metal
For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers. The size listed is the combined total of the two parts.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Nordbak Wearing Compound | ||||||||||||||
| PC 7218 | 5 | Jar, Can | 30 | 7 | Paste | 2:1 | 260 sq. in. @ 1/4" | 1/4" | -15° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 0000000 |
| PC 7218 | 25 | Pail, Can | 30 | 7 | Paste | 2:1 | 1,240 sq. in. @ 1/4" | 1/4" | -15° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 |