Clear All
Type Type |
|---|
|
Maximum Thickness Maximum Thickness |
|---|
|
Begins to Harden Begins to Harden |
|---|
|
Consistency Consistency |
|---|
|
Manufacturer Model Number ManufacturerModel Number | Show |
|---|
|
Manufacturer Model Number ManufacturerModel Number | Hide |
|---|
Color Color |
|---|
 | Gray |
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
|---|
|
Manufacturer Model Name Manufacturer Model Name |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Mix Ratio Mix Ratio |
|---|
|
Reaches Full Strength Reaches Full Strength |
|---|
|
Clarity Clarity |
|---|
|
For Use Outdoors For Use Outdoors |
|---|
|
Manufacturer Manufacturer |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Mixing Required Mixing Required |
|---|
|
Formulation Formulation |
|---|
|
Fine-Particle Abrasion-Resistant Surface Fillers for Metal
For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Nordbak Pneu-Wear | |||||||||||||||
| PC 7317 | 3 | Can | 30 | 6 | Paste | 4:1 | 150 sq. in. @ 1/4" | 1/4" | Yes | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 0000000 |
| PC 7317 | 25 | Pail, Can | 30 | 6 | Paste | 4:1 | 1,240 sq. in. @ 1/4" | 1/4" | Yes | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 |