Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.

All accessories include the necessary hardware for attaching them to arms.

Clamp-on bases have two arm attachment locations. Place arms straight or at a right angle from the clamping screw. Clamp-on bases with a rubber V-block can be mounted to rounded surfaces such as pipe and railings.

Spring clamps with three attaching end mounting holes can be mounted parallel or perpendicular to your positioning arm. Spring clamps with a 4 1/2" reach clamp further into a workpiece than other spring clamps.

Three-finger clamps have bent fingers to hold workpieces that are hard to grip, such as beakers, flashlights, and webcams. A rotating position lock lets you rotate these clamps on your positioning arm. Secure clamps in place with the included locknut.

Bend these arms to hold small equipment such as lights and microphones in almost any position.

For technical drawings and 3-D models, click on a part number.

Adjust the flexible ball-and-socket segmented arm to nearly any position and lock in place. A heavy base adds stability.

Holders with a granite base have an extremely tight flatness tolerance. Their flatness gives you an accurate reference for inspection work and lets you move workpieces in and out smoothly. These holders have a fine-adjustment clamp to position indicators at precise angles.

Position the flexible ball-and-socket segmented arm around obstructions and lock in place with a lever. The vacuum base provides stability on granite plates and other nonmagnetic surfaces.

A flexible ball-and-socket segmented arm adjusts to nearly any position and locks in place with a lever. The base is comprised of adjustable magnetic pins which allow it to conform to any shape and grip most metal surfaces. It has a magnetic-release switch for easy setups.

Adjust the flexible arm to nearly any position. These holders have a ball-and-socket segmented arm that locks in place with a lever. The magnetic base has a release switch for easy setups.

Holders with V-grooved base can be mounted on both curved and flat surfaces.

Holders with fine-adjustment base or clamp give you more precise control over positioning.

Often used where space is tight or there’s not much of a surface for mounting, the clamp on these indicators fits where a weighted or magnetic base can’t. The clamp also gives you the option to directly mount these indicators to a machine or the piece you’re measuring. With the ball-and-socket segmented arm, you can adjust the indicator to nearly any position to keep it from obstructing what you're measuring. Pull the lever to lock the arm in place when you're done. To measure objects, these indicators have a spring-loaded plunger that retracts and extends as the surface varies. It’s easy to see how much a measurement increases, since the dial is continuous and numbered clockwise around the face. Adjust the tolerance pointers to mark measurements that fall outside your limits.

Indicators with a plier clamp work on most thin, flat surfaces.

Indicators with a C-clamp apply less pressure than indicators with a plier clamp, so there’s less risk of damaging a workpiece.

With adjustable magnetic pins that conform to any shape, the base on these variance indicators mounts securely to uneven surfaces. The ball-and-socket arm is highly adjustable and locks in place with a lever, so it holds the indicator in almost any position. For quick dismounting, the base has a magnetic release switch.

A spring-loaded plunger extends and retracts to measure objects. The measurements are displayed on an LCD screen. Start measuring at any point by pressing the zero-set button. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off.

All can send data to your computer using a USB cord (sold separately). They have SPC data output to wirelessly transfer your measurement data to your device with the push of a button. You'll need a data transmitter/receiver set (sold separately). Indicators with Bluetooth send measurement data to your device wire-free and without an additional device.

IP67-rated indicators seal out coolant, water, and dust, so you can take measurements in dirty machining environments.

Tolerance checking indicators inform you when an item falls outside your set measurements.

Bend and flex the arm of the base to position your indicator—these holders have ball-and-socket segments that lock in place with a lever. The base is magnetic and has a V-groove on the bottom for a solid mount on flat and curved metal surfaces. Flip a switch to release the magnet.

A spring-loaded plunger extends and retracts from the indicator to take measurements. The measurements display on an easy-to-read LCD screen. Press the zero-set button to start measuring at any point. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the indicator is off.

All can send data to your computer using a USB cord (sold separately). They have SPC data output to wirelessly transfer your measurement data to your device with the push of a button. You'll need a data transmitter/receiver set (sold separately). Indicators with Bluetooth send measurement data to your device wire-free and without an additional device.

IP67-rated indicators seal out coolant, water, and dust, so you can take measurements in dirty machining environments.

Tolerance checking indicators inform you when an item falls outside your set measurements.

With adjustable magnetic pins that conform to any shape, the base on these variance indicators mounts securely to uneven surfaces. The ball-and-socket arm is highly adjustable and locks in place with a lever, so you can hold them in almost any position. A spring-loaded plunger retracts and extends to measure objects. These indicators have a continuous dial numbered clockwise around the face, so it’s easy to see how much a dimension increases. Adjust the tolerance pointers to mark measurements that fall outside your limits. For quick dismounting, the base has a magnetic release switch.

Measure in almost any position—these variance indicators have an adjustable ball-and-socket arm that locks in place with a lever. With a magnetic V-grooved base, they mount securely to both flat and curved metal surfaces. A spring-loaded plunger retracts and extends to measure objects. These indicators have a continuous dial numbered clockwise around the face, so it’s easy to see how much a dimension increases. Adjust the tolerance pointers to mark measurements that fall outside your limits. For quick dismounting, the base has a magnetic release switch.

Set up your laptop where you normally couldn't, such as on a cart handle or vehicle. These arms attach to surfaces to create a secure mounting point for your laptop. Their base is adjustable to fit a variety of laptop sizes.

Clamp-on pipe mount arms attach to round bars, pipes, and railings with two adjustable U-bolts. They have two ball-and-socket joints—one below the laptop holder and one above the base. Each joint rotates 360°, so you can move these arms in any direction and lock them in place.

For technical drawings and 3-D models, click on a part number.

Keep smartphones and irregularly-shaped devices, such as radios, in sight and within reach. These arms mount to a variety of surfaces and have 360° range of motion thanks to their ball-and-socket joints. Tilt or rotate them for a better viewing angle and lock the joints in place.

Arms for smartphones have spring-loaded brackets to grip the outside of your smartphone while leaving the screen visible.

Arms for irregularly-shaped devices hold mobile devices that don’t have a uniform shape, such as radios and GPS navigators. They have rubber fingers that adjust to fit around curves, avoid antennas, and grip asymmetrical devices.

Clamp-on rectangular bar-mount arms have a base that fits around rectangular parts, such as square posts, t-slotted framing, and rails.

Clamp-on pipe-mount arms attach to round bars, pipes, and railings using adjustable jaws. They’re commonly used to mount screens to cart handles.

For technical drawings and 3-D models, click on a part number.

These arms have a VESA (Video Electronics Standards Association) standard mounting hole pattern to attach a monitor.

Threaded hole and clamp-on arms have gas springs that counterbalance monitor weight to keep the arm in position.

For technical drawings and 3-D models, click on a part number.

Position your tablet within view while keeping your hands free to work. These arms mount to a variety of surfaces while keeping a secure grip on your tablet.

Clamp-on bench-mount arms attach to the edge of a workbench or tabletop. They have two pivot points that rotate 360°. The joint behind the tablet holder allows you to rotate the screen and tilt it for a better viewing angle. No need to lock them in place—the pivot points stay in position on their own.

Bar-, pipe-, magnetic-, suction-, and threaded-stud-mount arms have ball-and-socket joints that give them a 360° range of motion. Tilt or rotate them for a better viewing angle and lock the joints in place.

Clamp-on rectangular bar-mount arms have a base that fits around rectangular parts, such as square posts, t-slotted framing, and shelving units.

Clamp-on pipe-mount arms attach to round bars, pipes, and railings using adjustable jaws. They’re commonly used to mount screens to cart handles.

For technical drawings and 3-D models, click on a part number.

These arms lock around the top and bottom edges of tablets to keep them from shaking loose in areas with strong vibrations. They’re often used to mount tablets onto forklifts and other machines. Their ball-and-socket joints rotate 360°, so you can move these arms in any direction, then lock them in place.

Rectangular-bar mount arms fit onto square posts and rails, which are often found in forklift cages.

Pipe mount arms clamp onto cart handles, railings, and other round supports.

For technical drawings and 3-D models, click on a part number.

Your entire workstation mounted on a single arm. These arms have two plates, each with its own industry-standard mounting pattern. Connect monitors, tablets, keyboards, and other compatible devices to them. Swing your keyboard out of the way or tilt your monitor for a better view—these arms have ball-and-socket joints for 360° range of motion. To keep a configuration, simply lock the joints in place.

VESA (Video Electronics Standards Association) mounting hole patterns attach to monitors. AMPS mounting hole patterns attach to keyboards. To connect two devices with VESA mounting hole patterns, use adapters (sold separately) to convert the AMPS end mount to a VESA end mount.

Rectangular bar-mount arms have a base that clamps around rectangular parts, such as square posts, t-slotted framing, and rails. They’re commonly used on forklift cages.

For technical drawings and 3-D models, click on a part number.