These hooks are often used to hang coats and other lightweight items.

With a welded construction, these racks hold heavier items than standard hook racks, such as chains, ladders, and heavy tools.

Twist the handle to turn the magnet on and off to easily position these hooks.

Use screws to mount these hooks to the ceiling or under a surface, such as a bench top.

Place over doors and panels to add storage space without creating holes.

Quickly mount these hooks with a few strikes of a hammer.

Racks have multiple holders to organize items.

Organize small parts and hand tools with these racks, which attach to steel walls, cabinets, and other magnetic surfaces.

Hold an angle grinder with a wheel diameter up to 6".

Store stretch wrap and hand-held stretch wrap dispensers.

Wet the cloth backing to attach these hangers to a flat surface. Use individually or as an interlocking pair: one mounts to the wall and the other to the item you're hanging.

A locking tab and mounting screw secure holders on hardboard pegboard to store tools such as pliers, screwdrivers, and hammers.

Hang wrenches, handsaws, levels, and other tools on these hooks.

Assortments include enough pieces to set up an entire pegboard.

Hang items such as wrenches, hammers, and extension cords.

These holders keep steel tools in place magnetically.

Pair these brackets with any shelf.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

These have a removable half-link to attach large rings, links, and other closed fittings.

For a more secure connection than standard hooks, the latch locks closed when a load is applied.

These hooks swivel under load. They have a latch locks closed when a load is applied for a more secure connection than standard hooks.

These rotate for easy positioning before a load is applied.

A ball-bearing swivel allows these to rotate under load. Attach to chain by inserting the included pin through a link.

With a narrow opening and contoured sides, these securely hold a single link of chain to prevent overtightening when lifting a load.

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the eye end.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

These swivel hooks have a latch that ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the clevis end.

An unthreaded shank allows you to cut your own threads.

Often used in binding and tie-down applications, these securely hold a single link of chain.

Use these kits with hooks that doin't have a pinhole.

For extra security, these have a latch that snaps back into place to secure your load.

These hooks meet MS-87006.

Use these S-hooks for lifting applications.

Also known as nut eyebolts, these are designed for through-hole applications.

Route wire and cable through the smooth eye without snagging.

These eyebolts retain their strength in temperatures as low as -40° F.

Use these eyebolts for routing wire and for other light duty applications.

Also known as blank eyebolts, you can weld or thread these to suit your application.

A wide opening accepts large diameters of rope and pipe. Squeeze the trigger to release.

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

Lock by screwing the latch into the body.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

The twisted shape of these links prevents loads from rotating or knotting.

Also known as lap links or repair links.

The galvanized finish resists corrosion.

Dimples hold the base tight to prevent it from swiveling.

The ring pivots 180° to secure loads in various directions. Also known as lashing rings.

Accommodate ties in any direction with these rings that swivel all the way around and pivot 180°.

Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.

Permanently sew webbing onto these hooks.

Permanently sew webbing onto these buckles.

These slides are rated for heavy duty applications.

Create a tie down by attaching these hooks to elastic strap.

The thick wire coil on these hooks makes them stronger than standard hooks.

Use these plates where full lengths of track won't fit to create one anchor point.

The ratcheting handle on these load binders tightens incrementally for maximum tension and releases loads without kickback.

Secure heavy cargo, then remove and store the handle to prevent unwanted adjustments.

Route bundles of wire and cable through a single hook. A wide opening allows access for installation, adjustment, and removal.

Hang these S-hooks from fencing and railing to route large bundles of material, such as cable, hose, and wire through your facility or worksite to avoid tripping hazards.

Anchor these ringbolts where you need them, then remove the ring when not in use. Once installed, the mounting bolt stays in place. Insert the ring by threading into the mounting bolt; remove by unthreading it.

Mount parallel lines of pipe, tubing, or conduit directly against the mounting surface.

Route pipe, tubing, and conduit across strut channel.

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.