For moving heavy products on shipping and assembly lines, these have three times the load capacity of our standard roller conveyors.

Conveyors are made of corrosion-resistant stainless steel, making them suitable for washdown applications.

Also known as line-shaft conveyors, these conveyors are driven by a drive shaft and round belts.

Expand, curve, and retract the accordion-style frame to position these conveyors wherever you need them.

Push small items from person to person in areas with frequent washdowns.

Expand, retract, and curve these conveyors wherever you need them—they’re ready to run once you plug them in.

Rollers have diameters between 2" and 4".

These rollers have diameters 1 3/8" and below.

Made from stainless steel, these rollers are suitable for washdown applications. They have a standard 1.9" diameter to fit most roller conveyors.

Choose the width you need from 6" to 60" in 1/16" increments.

These rollers have 0.78" diameters.

Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.

Improve tracking on curved conveyor sections. Rollers taper so packages maintain their orientation through the curve.

Rollers have a standard 1.9" diameter to fit most roller conveyors.

Rollers are tapered for use on curved conveyor sections.

We'll get the between frame width and groove spacing you need in 1/16" increments.

Replace rollers on a chain-driven conveyor.

Add a package stop on a conveyor to control product flow and allow for accumulation.

Covers fit loosely over the roller to allow packages to accumulate. Rollers can continue spinning inside the cover without causing damage to packages.

Keep small items moving smoothly down a roller conveyor. These guards cover the gap between rollers so items don’t fall through or get jammed.

Replace worn and damaged bearings or press-fit bearings into tubing or pipe to create a roller.

Mount to a conveyor frame to recondition a worn hex axle hole or to convert a round axle hole to a hex axle hole.

An accordion-style frame lets you quickly curve, expand, and retract these conveyors. They have skate wheels for flat-bottom objects in assembly lines or packaging and shipping applications.

Replace damaged wheels or use multiple wheels to build a custom conveyor.

A flange on these wheels separates material while guiding it down the line.

Extend these conveyors more than 60 ft. to move items over long stretches and then retract them to a more compact 10 ft. for storage. Often used to load trailers, they’re best for light duty loading of boxes and other flat-bottomed objects.

Configure wheels where you need them on these economical rails that you can cut to length.

The flange on the wheels separates and guides packages as they flow down the rails.

Also known as ball-bearing parallels, these plates have multidirectional balls that project from the top and bottom to position and move small, heavy items over short distances.

These ball transfers have capacities up to 2,200 lbs.

A double-sealed ball keeps out dirt and debris, and side vents expel contaminants.

Drop-in design makes for easy installation.

With a ball recessed into the mounting surface, these ball transfers have a low profile. Their double-sealed ball keeps out dirt and debris, and side vents expel contaminants.

The ball in these transfers is spring-loaded to absorb impact.

These ball transfers and stops rise when you supply air and retract into the housing when air supply ceases.

The flange has mounting holes for fastening.

To keep out dirt and debris, these flange-mount ball transfers have a double-sealed ball and side vents that expel contaminants.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

Stop heavy material in its tracks. With the same footprint as regular load-stopping air cylinders, these air cylinders have a lever end that absorbs 30% more force.

Space out parts on your conveyor line or vibratory feeder. Also known as escapements, these air cylinders have at least one finger that extends to hold parts and then retracts to release them.