More effective than water-based degreasers, these solvent-based degreasers cut through the toughest grease and oils.

Degreasers with acetone evaporate quickly without leaving a residue. They are often used to clean bearings and other metal parts.

Degreasers that are NSF registered K1 can be used in non-food-processing areas within food-processing facilities. They have a flip-up straw that’s attached to the nozzle, so it won’t get lost. Raise it for precision dispensing; lower it for storage or to dispense degreaser as a spray.

Degreasers with trans-dichloroethylene are often used in the mining, oil, and gas industries because they are nonflammable and evaporate rather than requiring rinsing.

Degreasers with a citrus scent contain citrus oil to dissolve adhesives, tars, and waxes. They are nonflammable and free of harmful vapors. Rinse parts and wipe them clean after degreasing. Wipes are mildly abrasive.

Degreasers with soybean oil are an economical alternative to degreasers with citrus oil. They leave a coating that helps prevent rust and are also nonflammable.

Often used on equipment in the mining, oil, and gas industries, these citrus-based solvents remove carbon black, crude oil, tar, asphalt, and grease. With no flammable or harsh chemicals, they can be rinsed away. They are also NSF registered C1 for use in non-food-processing areas within food-processing facilities. Unlike other solvent-based degreasers, they mix with water so you can dilute them, or you can use them full strength.

Remove brake fluid, grease, and oil from brakes with these solvent-based cleaners. They dry fast without leaving a residue. For use on hard, nonporous surfaces.

These solvent-based degreasers contain Vertrel™ to remove long-lasting lubricants, such as DuPont/Chemours Krytox, from parts and fittings. They are nonflammable and less hazardous than other solvents that remove lubricants, such as nPB, PERC, and TCE. They also evaporate quickly, allowing parts to be used shortly after cleaning.

These mild detergents contain bacteria that consume and break down grease and oil, rather than rinsing it into pipes that can clog. For use on hard, nonporous surfaces.

Often used to clean lubricants off compressed gas equipment and fittings, these solvent-based degreasers have a contaminant concentration below 1 ppm to ensure no residue or particles are left behind that can hinder the operation of valves, sensors, and controls. They contain Vertrel™ to remove long-lasting lubricants, such as DuPont/Chemours Krytox. They are nonflammable and less hazardous than other solvents that remove lubricants, such as nPB, PERC, and TCE. Use these degreasers as the primary cleaner or as a final rinse to ensure parts are completely clean. They evaporate quickly, allowing parts to be used shortly after cleaning.

Use these nonflammable solvents in vapor degreasing systems to ensure precision parts are clean and residue free. With a high solvent strength, they are more effective yet less hazardous than other vapor degreasing solvents, such as nPB, PERC, and TCE. They also evaporate quickly, allowing parts to be used shortly after cleaning.

Also known as TSP, these heavy duty, powdered cleaners remove heavy soils, dirt, and grease from concrete and tile.

Dissolve baked-on grease and food deposits in ovens and grills.

Clean dirt, gum, and varnish off carburetors, heat valves, and automatic chokes with this solvent-based formula.

Note: Use on metal surfaces only.

Less harsh than general purpose electrical cleaners, these cleaners are suitable for the delicate contacts in electronics and printed circuit boards.

Cleaners that are NSF registered K2 or NSF registered P1 can be used in food-processing environments.

Aerosol cans with a flip-up straw have a straw that’s attached to the nozzle, so it won’t get lost. Raise it for precision dispensing; lower it for storage or to dispense cleaner as a spray.

Keep electric motors and generators working efficiently by removing dirt, grease/oil, gum, and wax. These cleaners are NSF registered K2 for use in food-processing environments.

Eliminate dirt, oil, and grease buildup in electrical equipment such as relays, switches, and cables.

Cleaners that are NSF registered K2 can be used in food-processing environments.

Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

Cleaners provide long-lasting protection for all metal surfaces. Sealants for metal surfaces protect electrical contacts and connections in high humidity, corrosive, and salty environments. Sealants for gold surfaces improve conductivity and provide lasting protection.

Kits come with cleaner, sealant for metal surfaces, sealant for gold surfaces, and grease. Grease provides lubrication while also removing corrosion and oxidation. Kits also include cloths, brushes, and swabs for application.

Stronger than our standard floor cleaners, these cleaners remove even the toughest soils and grease from floors to help prevent slips and falls. Use with a mop, pressure washer, or powered floor cleaner.

The microbes in these clay-based cleaners devour oil, grease, and organic waste and only leave behind carbon dioxide, water, and natural fats. Use these cleaners for oil spills or inside grease traps, septic tanks, and storm drains. Mix with water to activate.

Clean up fuel spills without leaving flammable waste behind. These all-in-one kits include reusable sorbent socks to surround spills, a liquid cleaner with microbes to digest fuel, and a foam sprayer to mix the cleaner into your spill. The cleaner evaporates after a few minutes, and all that’s left is a non-toxic residue.