Because of their one-hand operation, pistol-grip grease guns are easier to use for adding grease to hard-to-reach places than lever-grip guns.

Turn a small tube of grease into a dispenser.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Dispense grease with the highest-pressure-rated gun we offer.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

These guns deliver twice as much grease per stroke than standard lever-grip guns.

Use compressed air to dispense grease.

Dispense from grease guns into grease fittings and bare lubrication points.

These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle.

These flexible nozzles have threads on both ends for connecting a grease gun to a dispensing tip.

Dispense from grease guns into grease fittings and bare lubrication points.

These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Sets include dispensing tips for grease fittings and bare lubrication points.

These flexible extensions have a quick-disconnect fitting that snaps into your dispensing tip, so you can lubricate grease fittings that are hard to reach.

Attach these nipples to guns to load grease from bulk filler pumps.

Connect these guns to container-mount dispensers for controlled dispensing.

A display allows you to monitor how much grease is dispensed.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers.

Move grease-dispensing guns in any direction without kinking the outlet hose.

A needle dispensing tip provides fine control for lubricating small parts.

These dispensers have an opening for filling without removing the nozzle.

Use suction to remove old lubricant from gear boxes and transmissions.

Clamp this applicator around control cables to lubricate them with minimal mess.