These dispensers come packed with grease, eliminating the mess of filling. Turn the dial to adjust flow rate.

Tighten the cover to dispense grease.

Useful in remote areas without access to air or electrical power.

Apply lubricant to gear racks with a 14 1/2° pressure angle and a pitch of 16.

With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.

Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Dispense from grease guns into grease fittings and bare lubrication points.

These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Mount holders in convenient locations to keep grease guns within reach.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.

Because of their one-hand operation, pistol-grip grease guns are easier to use for adding grease to hard-to-reach places than lever-grip guns.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

This gun comes filled with 2 oz. of lithium-thickened grease.

These guns deliver twice as much grease per stroke than standard lever-grip guns.

Dispense small amounts of grease with this compact gun.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Ensure that only food-grade grease is used in controlled areas—this gun only works with compatible food-grade grease cartridges.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Mount these pumps to your grease container to bulk load guns.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.

A display allows you to monitor how much grease is dispensed.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers.

More portable than air-powered options, attach this dispenser to a battery to deliver grease on the go.

For use in clean environments, these oil reservoirs have multiple air vents that keep pressure balanced.

Mount these directly to your machine—the cup allows oil to gradually pass through to equipment, reducing time spent on manual lubrication.

A sealed design prevents contamination in dirty and dusty environments.

Serve multiple lubrication points from a single location.

Control the flow of oil to a single lubrication point.

Flip the lever to start and stop flow.

For use in clean environments, these manifolds have multiple air vents that keep pressure balanced.

A sealed design prevents contamination in dirty and dusty environments.

Manually adjust the flow of oil to a single lubrication point.

As chain, gears, and conveyors move, these brushes rotate to apply lubricant.

Lubricate sheet stock up to 8" wide.

Use this dispenser to brush oil on chain, gears, and conveyors. Often used to replenish lubricant after washdowns.

Air pressurizes the oil in the reservoir and atomizes the spray. Add a spray valve to direct the flow of oil.

Use with manual and electric pumps to dispense different amounts of oil from multiple lubrication points.

Choose from pumps that dispense with a set interval. Turn the dial to adjust the flow from 0.1 oz. to 0.2 oz. per cycle.

With a maximum flow of 0.005 oz. per cycle, these pumps deliver small, precise amounts of oil. Turn the dial to set the cycle interval.

Clamp this applicator around control cables to lubricate them with minimal mess.

Use suction to remove old lubricant from gear boxes and transmissions.

Measure oil as it's dispensed.

Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers.

Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum.

These dispensers have a reservoir and controls for coolant flow.

Draw coolant from your existing tank.

Draw coolant from your existing tank.

These nozzles handle coolant pressure up to 150 psi.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

For high-pressure coolant lines, these nozzles withstand pressure up to 500 psi.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Use with Snap-Loc hose to assemble and disassemble components.

Swivel the ball-socket connections to position these arms and then lock them in place.

Use with Loc-Line hose to assemble and disassemble components.

Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.

This hose is made of steel.

Access difficult-to-reach lubrication points from up to 10 ft. away.

The pins on these fittings lock with dispensing tips for pin-style fittings to create a tight seal.

Keep thin grease from leaking out—the check valve on these fittings has a Buna-N seat that creates a tighter seal than check valves on other grease fittings.

Inject lubricant into motors, bearings, engine blocks, and all kinds of machinery.

Ensure a secure fit in unthreaded holes—these fittings cut threads as they’re installed. Use these fittings in tight spaces where protruding fittings won't work.

Ensure a secure fit in unthreaded holes—these fittings cut threads as they’re installed. They're also known as hydraulic grease fittings.

Lubricate multiple points from a single location.

Remove worn fittings and repair threaded holes.

Keep standard grease fittings free of dirt and moisture.

Install these fittings into threaded holes.