Formulated to adhere to metal parts and stay in place in wet environments, this grease is commonly used in pulp and paper manufacturing and water management facilities.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.

Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease.

Grease with lithium thickener offers good heat resistance.

Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity. Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

Also known as dielectric grease, use insulating grease to lubricate and protect electrical systems. It resists water and corrosion. This grease can be used on most rubber and plastic.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 3 is about the consistency of vegetable shortening.

Dielectric strength measures the maximum voltage a grease can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.

Grease lubricates most efficiently below the maximum temperature.

Molykote 5 Compound is for use on insulators, bushings, and high-current switches.

Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants with moly (molybdenum disulfide) withstand high-pressure applications and have excellent wear resistance. Lubricants with lead are nonabrasive for use with soft metal and have good heat resistance. DuPont Molykote G-n Metal Assembly Paste offers excellent protection against wear and corrosion.

Lubricants that meet MIL-A-907F and MIL-PRF-907F have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.

Free of metal particles, these lubricants won’t react with stainless steel. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants with graphite have good chemical and corrosion resistance, along with excellent temperature resistance. Lubricants with moly (molybdenum disulfide) withstand high-pressure applications and have excellent wear resistance. Lubricants with calcium fluoride can be used with plastic, rubber, and other nonmetallic material.

Loctite® LB 8013 High Purity Anti-Seize is made of highly pure ingredients in a controlled environment for superior corrosion resistance.

Lubricants that meet MIL-PRF-83483 are half moly and half petroleum jelly.

Prevent parts from locking or corroding together even when exposed to wet environments—these lubricants stay in place in the presence of water. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Lubricants with zinc form a coating that protects aluminum against corrosion. Lubricants with moly (molybdenum disulfide) withstand high-pressure applications and have excellent wear resistance.

These lubricants dry to form a thin, solvent-resistant film that won't squeeze out or attract dirt. They're made with moly to withstand heavy loads and pressure. They can handle low-speed loads at temperatures up to 745° F and static loads up to 2400° F. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.