Protect equipment while limiting environmental impact. This grease breaks down quickly in water.

Nano-sized additives penetrate small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. It's formulated to adhere to metal parts and to stay in place in wet environments.

Protect equipment while having a limited impact on the environment. This grease resists moisture but still breaks down quickly in water.

Brush on most metal surfaces to provide a layer of protection against corrosion.

For use on metal parts to prevent corrosion and as an antiseize lubricant. Gauges are often coated in a thin layer of lanolin to move smoothly and maintain their precision.

This grease comes in cartridges that only work with our Controlled-Use Food-Grade Lever-Grip Grease Guns to make sure that the right grease is used in food-processing areas. It is NSF registered H1 for incidental food contact.

A firm consistency and resistance to evaporation make this grease ideal for vacuum applications, such as flow meters, vacuum and pressure systems, and laboratory equipment.

Fluorocarbon and fluorinated polymer thickeners add chemical resistance to this grease. It remains intact when exposed to water and most solvents and chemicals.

This grease meets NSF/ANSI Standard 51 and FDA 21 CFR 175.300 for direct contact with food and NSF/ANSI Standard 61 for use with components that come into contact with drinking water.

Use at pressures up to 50,000 psi.

Apply directly to seals and O-rings to extend service life by preventing drying and cracking.

This thin lubricant penetrates into tight spaces, and nano-sized additives fill small surface imperfections, reducing wear and heat and extending the life of both the lubricant and equipment.

For use in food-processing and preparation areas, these thin, multipurpose lubricants are NSF registered H1 for incidental food contact.

Protect food-processing and preparation equipment while limiting environmental impact. These multipurpose lubricants are NSF registered H1 for incidental food contact and are rated to quickly break down in water.

For use in food-processing and preparation areas, these lubricants are rated for incidental food contact. Coat tight-fitting parts with them before sliding together to make assembly easier.

Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.