This grease remains stable and in place under high pressure, heavy loads, and shock loads. It's often used for demanding mining, construction, and automotive applications.

Waterproof and heat-resistant, this grease can be autoclaved without washing out of equipment. It's chemically inert, so it won't interact with process fluids.

Brush on most metal surfaces to provide a layer of protection against corrosion.

For use on metal parts to prevent corrosion and as an antiseize lubricant. Gauges are often coated in a thin layer of lanolin to move smoothly and maintain their precision.

This grease remains stable and in place under high pressure, heavy loads, and shock loads. It's often used to lubricate heavy-duty food production equipment.

This grease comes in cartridges that only work with our Controlled-Use Food-Grade Lever-Grip Grease Guns to make sure that the right grease is used in food-processing areas. It is NSF registered H1 for incidental food contact.

This grease stands up to the high speeds typically found in automated applications.

For use in high-pressure applications, this grease prevents wear and corrosion at loads up to 50,000 psi.

Use this grease in areas where there is the possibility of contact with food.

Resistant to oxidation and heat, use this oil to lubricate a variety of machine tools and equipment. It's also known as turbine oil.

Use this oil in food-processing and preparation areas.

This thin lubricant penetrates into tight spaces, and nano-sized additives fill small surface imperfections, reducing wear and heat and extending the life of both the lubricant and equipment.

For use in food-processing and preparation areas, these thin, multipurpose lubricants are NSF registered H1 for incidental food contact.

Protect food-processing and preparation equipment while limiting environmental impact. These multipurpose lubricants are NSF registered H1 for incidental food contact and are rated to quickly break down in water.

Spray these lubricants onto wire rope and cable used in vertical or fast-moving applications. They dispense as a thick gel, completely covering wire strands without dripping or running off. Use them to cut through dirt, grease, and rust, and to protect wire rope and cable.

For use in food-processing and preparation areas, use these lubricants to cut through dirt, grease, and rust, and to protect chain and other moving metal parts.

Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.

Also known as antifriction coatings, these slippery coatings cure to provide permanent lubrication. They're made with moly for high-load applications, such as hinges, gears, and rods. They fill in surface imperfections for a smooth, dry finish that won’t attract dust.

Made of graphite, these powders and flakes lubricate under heavy loads and high temperatures. They resist most chemicals and conduct heat and electricity. Use them dry or mix with oil and grease.