A good value for everyday use, these wheels offer an economical balance between heavy material removal and long life. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Made with aluminum oxide in a diamond pattern, these flexible wheels remove mill scale from metal, including pipe, in a single step.

The absence of iron, sulfur, and chlorine in these wheels means they won’t corrode or discolor stainless steel. They are also known as INOX wheels, Type 27 wheels, raised-hub wheels, and grinding discs.

A large grinding surface, combined with a thick layer of rough abrasive removes more material than other wheels. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.

Heat-dissipating holes reduce material buildup and extend the life of the wheel. Wheels have a semiflexible backing that conforms to curved and rough surfaces.

Multiple layers of nylon mesh embedded with abrasive provide a cushioned grind. Also known as unitized discs or wheels.

Wheels have a large surface area and a thick layer of rough abrasive for heavy material removal on concrete and stone. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.

Grind a variety of materials, such as metal, fiberglass, and ceramics. Also known as (AVOS) Type 29 wheels, they have an upside-down dish shape for a large contact area.

A coating prevents dust and debris from building up on the abrasive surface.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.

Nylon mesh is embedded with precision-shaped ceramic alumina, which cuts through hard metals like stainless steel faster than other forms of ceramic alumina because of its sharp, outwardly pointed grit.

Get twice the life over standard nylon mesh cushioned discs—the flexible mesh in these discs is embedded with a premium form of aluminum oxide that aggressively removes material from steel and wood.

Fit these discs over your tool's arbor.

A coating prevents dust and debris from building up on the abrasive surface.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

Replace your sanding discs less often—the backing plate on these discs can be trimmed off as the abrasive flaps wear down, allowing you to use more of the disc.

These discs have 30% more flaps than standard flap sanding discs to last longer.

These discs have a harder abrasive than standard flap sanding discs for corners.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

With more flaps than standard discs, these last 30-40% longer.