McMaster-Carr logo
    Filter by
    Power Source
    Wheel Diameter
    Electrical Phase
    Electrical Connection
    Axis
    Arbor Hole Diameter
    Batteries Included
    Speed Control Type
    Overall Width
    Table Width
    Wheel Thickness
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    84 Products

    Stationary Surface Grinders

    Image of Product. Front orientation. Contains Annotated. Surface Grinders.
    Image of Product. Front orientation. ZoomedIn view. Contains Annotated. Surface Grinders.
    Powerful enough to handle industrial-grade grinding jobs, these grinders create tight-tolerance flat surfaces on metal workpieces. They have large dials and finely threaded screws that control the movement of the table and grinding wheel with extreme precision—each revolution of the dial moves the table just 0.1" and grinding wheel just 0.05". The table moves side-to-side on the X-axis and front-to-back on the Y-axis, while the grinding wheel moves up and down on the Z-axis. Secure your workpieces to the included magnetic chuck. A cast iron body creates a vibration resistant base for accurate grinding. They have a flood coolant system that protects workpieces from overheating, prevents the grinding wheel from clogging, and shortens grind times to extend grinding wheel life. The coolant system also keeps the air in your shop free from grinding dust. These grinders are wired for 120V AC but can be changed to 240V AC.
    Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    For
    Wheel
    Overall
    Table
    Max. Travel
    Power,
    hp
    Max. Rotation
    Speed, rpm
    Current (Voltage)
    Electrical
    Phase
    Wired for
    Voltage, V AC
    Dia.
    Thk.
    For Arbor
    Hole Dia.
    Switch
    Type
    Speed Control
    Type
    Ht.
    Wd.
    Dp.
    Lg.
    Wd.
    X-Axis
    Y-Axis
    Z-Axis
    Wt.,
    lb.
    Each
    Cast Iron Surface Grinders with Magnetic Chuck
    23,45018.8 amp (120V AC)
    9.4 amp (240V AC)
    Single1207"3/4"1 1/4"Push ButtonFixed63"61"42 3/4"18"6"20 1/2"6 7/8"10 3/4"1,3304754N11000000000
     

    Cordless Angle Grinders for Grinding Wheels and Sanding Discs

    Image of Product. Front orientation. Angle Grinders. Cordless Angle Grinders for Grinding Wheels and Sanding Discs.
    With no cord to limit mobility, you can take these battery-powered grinders wherever they’re needed. Download the app to track their location, customize settings, view usage data, and receive alerts before they need repair.
    The included type 27 wheel guards are required when using grinding wheels and cups. Backup pads (not included) are required when using sanding discs. Thread the backup pad onto the tool's arbor, then attach a sanding disc and secure with its disc nut.
    Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    Milwaukee—Milwaukee grinders have a spindle lock for fast wheel changes.
    Angle Grinders
    Replacement
    Batteries
    For Wheel
    Dia.
    Max. Rotation
    Speed, rpm
    For Arbor Hole
    Thread Size
    Voltage
    Battery Charging
    Time (Battery Cap.)
    Batteries
    Included
    Switch
    Type
    Speed Control
    Type
    Overall
    Lg.
    Wt.,
    lb.
    Certification
    Includes
    Each
    Pkg.
    Qty.
    Pkg.
    Lithium Ion (Li-Ion) Battery
     
    DeWalt DCG418X1
    6"9,0005/8"-11
    60V AC45 min. (9 A·h)YesTriggerFixed13 3/4"4.75UL Listed
    Carrying Bag, Side Handle, Two Flanges, Wrench4743N110000000129835A7680000000
     
    Milwaukee 2882-22
    5"8,5005/8"-11
    18V DC65 min. (6 A·h)YesPaddleFixed13 1/8"3.25C-UL Listed
    Carrying Bag, Flange, Side Handle, Spindle Lock, Wrench4743N12000000129735A312000000
     
    Accessories for Angle Grinders
    Sanding Backup Pads
    Backup pads are required when using sanding discs. Thread the backup pad onto the tool's arbor, then attach a sanding disc and secure with its disc nut.
    For Disc
    Dia.
    Max. Rotation
    Speed, rpm
    Arbor Hole
    Thread Size
    Includes
    Each
    4 1/2"18,0005/8"-11Disc Nut4728A29000000
    5"18,0005/8"-11Disc Nut4728A3100000
    Angle Grinder Wheel Guards
    Wheel guards are required when using grinding wheels and cups.
    For
    Grinding Wheel
    Dia.
    Designation
    For Mfr. Model
    No.
    Each
    For DeWalt Grinders
    4 1/2"Type 1DWE402, DWE42148705A32000000
    5"Type 1DWE402, DWE431148705A3400000
    6"Type 27DWE431448705A370000
     
    For Milwaukee Grinders
    4 1/2"Type 16142-3146225A7700000
    4 1/2"Type 276142-3146225A76700000
    5"Type 16117-3046225A77100000
     

    Light Duty Bench Grinders

    Image of Product. Front orientation. Bench and Pedestal Grinders. Light Duty Bench Grinders.
    Image of Product. Grinder with Wire Brush. Front orientation. 0.5" Wire Wheel Brush. Light Duty Bench Grinders.

    Grinder with Wire Brush

    Use these grinders for occasional bench grinding, tool sharpening, and buffing.
    Caution: Only use accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    120V AC/240V AC—The 120/240-volt models are wired for 120-volt service.
    0.5" Wire Wheel Brush—Grinder with wire wheel brush can also be used for polishing and removing rust and scale.
    Bench Grinders
    Replacement
    Manual Switches
    For Wheel
    Dia.
    Max. Rotation
    Speed, rpm
    Power,
    hp
    For Arbor
    Hole Dia.
    Voltage
    Electrical
    Connection
    Electrical
    Phase
    Switch
    Type
    Wheel
    Thk.
    Vent
    Dia.
    Material
    Motor Enclosure
    Type
    Wt.,
    lb.
    Includes
    Each
    Each
    Fixed Speed
     
    CSA Certified, ANSI/UAMA B7.1, OSHA Compliant 29 CFR 1926.303
    6"3,4501/31/2"120V AC/240V ACPlugSingleToggle3/4"2 1/2"Totally Enclosed28Grinding Wheel, 36-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4689A1100000004689A35000000
    7"3,4501/25/8"120V AC/240V ACPlugSingleRocker1"2 1/2"Cast IronTotally Enclosed5436-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4689A810000004689A3500000
    8"3,4503/45/8"120V AC/240V ACPlugSingleToggle1"2 1/2"Totally Enclosed58Grinding Wheel, 36-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4689A140000004689A3500000
    8"3,4503/45/8"220V AC/440V ACWire LeadsThreeToggle1"2 1/2"Cast IronTotally Enclosed6036-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4689A820000004689A8400000
    10"1,72511"120V AC/240V ACPlugSingleToggle1"2 1/2"Totally Enclosed12536-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4689A170000004689A3500000
    10"1,72511"220V AC/440V ACWire LeadsThreeToggle1"2 1/2"Cast IronTotally Enclosed11136-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4689A830000004689A8400000
     
    UL Listed, ANSI/UAMA B7.1, OSHA Compliant 29 CFR 1926.303
    6"3,4501/21/2"120V ACPlugSingleRocker3/4"1 1/2"Cast IronTotally Enclosed3836-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4601A150000004600A1200000
    6"3,4501/21/2"120V ACPlugSingleRocker3/4"2"Cast IronTotally Enclosed320.5" Wire Wheel Brush, 36-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers4600A10000004600A1200000
     
    Accessories and Replacements for Bench and Pedestal Grinders
    Stands
    Mounting
    Surface
    Material
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Includes
    Each
    For CSA Certified Grinders
    Iron31 3/4"10 5/8"10 5/8"59Tool Tray, Water Pot4689A260000000
     
    Replacement Eye Shields and Replacement Tool Rests
    Each
    Eye Shield for CSA Certified Bench Grinders4689A28000000
    Eye Shield for UL Listed Bench Grinders4600A1100000
    Left-Hand Replacement Tool Rest for CSA Certified Bench Grinders4689A3200000
    Right-Hand Replacement Tool Rest for CSA Certified Bench Grinders4689A3400000
    Left-Hand Replacement Tool Rest for UL Listed Bench Grinders4601A4100000
    Right-Hand Replacement Tool Rest for UL Listed Bench Grinders4601A4200000

    Heavy Duty Bench Grinders

    Image of Product. Front orientation. Bench and Pedestal Grinders. Heavy Duty Bench Grinders.
    Image of Product. Grinder with Tool Tray, Two Adjustable Lighted Eye Shields, and Water Pot. Front orientation. Bench and Pedestal Grinders. Heavy Duty Bench Grinders, Two Adjustable Lighted Eye Shields, Water Pot, Tool Tray.

    Grinder with Tool Tray, Two

    Adjustable Lighted Eye

    Shields, and Water Pot

    Long-lasting lubricated ball bearings make these grinders good for continuous use.
    Use for bench grinding, tool sharpening, and buffing.
    Caution: Only use accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    120V AC/240V AC—The 120/240-volt models are wired for 120-volt service.
    For Wheel
    Dia.
    Max. Rotation
    Speed, rpm
    Power,
    hp
    For Arbor
    Hole Dia.
    Voltage
    Electrical
    Connection
    Electrical
    Phase
    Switch
    Type
    Wheel
    Thk.
    Vent
    Dia.
    Material
    Motor Enclosure
    Type
    Wt.,
    lb.
    Includes
    Each
    Fixed Speed
     
    UL Listed, CSA Certified, OSHA Compliant 29 CFR 1910.215
    7"3,6001/25/8"120V AC/240V ACPlugSingleToggle1"3"IronTotally Enclosed7036-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4601A23000000000
    7"3,6001/25/8"208V AC to 230V AC/460V ACWire LeadsThreeToggle1"3"IronTotally Enclosed7036-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4601A2500000000
    8"3,6003/43/4"208V AC to 230V AC/460V ACWire LeadsThreeToggle1"3"IronTotally Enclosed9936-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4601A2100000000
     
    UL Listed, OSHA Compliant 29 CFR 1910.215
    7"1,8001/25/8"120V AC/240V ACPlugSingleToggle1"3"IronTotally Enclosed7136-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4601A1600000000
    7"1,8001/25/8"120V AC/240V ACPlugSingleToggle1"3"IronTotally Enclosed8436-grit Grinding Wheel, 60-grit Grinding Wheel, Tool Tray, Two Adjustable Lighted Eye Shields, Two Adjustable Tool Rests and Supports, Two Spark Breakers, Vented-Exhaust Wheel Guard, Water Pot4452A300000000
    7"3,6001/25/8"120V AC/240V ACPlugSingleToggle1"3"IronTotally Enclosed8436-grit Grinding Wheel, 60-grit Grinding Wheel, Tool Tray, Two Adjustable Lighted Eye Shields, Two Adjustable Tool Rests and Supports, Two Spark Breakers, Vented-Exhaust Wheel Guard, Water Pot4452A400000000
    8"1,8003/43/4"120V AC/240V ACPlugSingleToggle1"3"IronTotally Enclosed9936-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4602A1100000000
    8"1,8003/43/4"120V AC/240V ACPlugSingleToggle1"3"IronTotally Enclosed11036-grit Grinding Wheel, 60-grit Grinding Wheel, Tool Tray, Two Adjustable Lighted Eye Shields, Two Adjustable Tool Rests and Supports, Two Spark Breakers, Vented-Exhaust Wheel Guard, Water Pot4452A1100000000
    8"1,8003/43/4"208V AC to 230V AC/460V ACWire LeadsThreeToggle1"3"IronTotally Enclosed9836-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4602A1200000000
    8"3,6003/43/4"120V AC/240V ACPlugSingleToggle1"3"IronTotally Enclosed9936-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4601A1900000000
    8"3,6003/43/4"120V AC/240V ACPlugSingleToggle1"3"IronTotally Enclosed11136-grit Grinding Wheel, 60-grit Grinding Wheel, Tool Tray, Two Adjustable Lighted Eye Shields, Two Adjustable Tool Rests and Supports, Two Spark Breakers, Vented-Exhaust Wheel Guard, Water Pot4452A1200000000
    10"1,80017/8"120V AC/240V ACWire LeadsSingleToggle1"3"IronTotally Enclosed13336-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4602A1500000000
    10"1,80017/8"120V AC/240V ACWire LeadsSingleToggle1"3"IronTotally Enclosed14536-grit Grinding Wheel, 60-grit Grinding Wheel, Tool Tray, Two Adjustable Lighted Eye Shields, Two Adjustable Tool Rests and Supports, Two Spark Breakers, Vented-Exhaust Wheel Guard, Water Pot4452A2100000000
    10"1,8001 1/27/8"208V AC to 230V AC/460V ACWire LeadsThreeToggle1"3"IronTotally Enclosed13436-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4602A2100000000
    10"1,8001 1/27/8"208V AC to 230V AC/460V ACWire LeadsThreeToggle1"3"IronTotally Enclosed14636-grit Grinding Wheel, 60-grit Grinding Wheel, Tool Tray, Two Adjustable Lighted Eye Shields, Two Adjustable Tool Rests and Supports, Two Spark Breakers, Vented-Exhaust Wheel Guard, Water Pot4452A2200000000
     
    Accessories and Replacements for Bench and Pedestal Grinders
    Each
    1 ½-pint Water Pot with Swivel Arm and Mounting Bracket4366A12000000
    Replacement Tool Rest for 7" Grinders4601A6200000
    Replacement Tool Rest for 8" and 10" Grinders4601A6400000
    Replacement Tool Rest Support for 7" Bench Grinders4601A28600000
    Replacement Tool Rest Support for 8" Bench Grinders4601A40600000
    Replacement Tool Rest Support for 10" Bench Grinders4601A67800000

    Dremel Rotary Tool Kits

    Grind, sand, finish, and polish with these versatile kits.
    They come with a light duty Dremel grinder that accepts a multitude of accessories. Grinders have a shaft lock for easy tool changes.
    Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    Electric
    Image of Product. Front orientation. Rotary Tools. Electric.
    Mfr. Model
    No.
    Max. Rotation
    Speed, rpm
    For Shank
    Dia.
    Switch
    Type
    Speed Control
    Type
    AC Voltage,
    V AC
    Current,
    amp
    Electrical Connection
    Component
    Overall
    Lg.
    Wt.,
    lb.
    Certification
    Includes
    Each
    3100-1/1535,0001/8"SlideVariable1201.2Plug7 1/2"1.125UL Listed, CSA Certified
    Fifteen Assorted Accessories, Light Duty Grinder4370A7000000
    4000-2/3235,0001/8"SlideVariable1201.6Plug8 1/2"1.25CSA Certified
    (2) Cutting Guides, (2) Grinding Bits, (2) Plastic Storage Cases, (5) Felt Polishing Wheels with Mandrel and Polish, (7) Sanding Sleeves with Drum, (10) Sanding Discs with Mandrel, Carrying Case, Dremel Cleaning Brush, Engraving Bit, Multipurpose Cutting Bit4344A15000000
    Cordless
    Image of Product. Front orientation. Rotary Tools. Battery Powered.
    Mfr. Model
    No.
    Max. Rotation
    Speed, rpm
    For Shank
    Dia.
    Switch
    Type
    Speed Control
    Type
    Batteries
    Included
    Overall
    Lg.
    Wt.,
    lb.
    Certification
    Includes
    Each
    7760-N/1025,0001/8"Push ButtonVariableYes7 1/2"1.5CSA Certified
    (4) Felt Polishing Wheels with Mandrel and Polish, 2.75-Hour Charger, Dremel Cleaning Brush, Engraving Bit, Grinding Bit, Plastic Storage Case, Sanding Sleeve Drum43435A61000000

    Air-Powered Straight Grinders for Wheels and Cones

    Image of Product. Front orientation. Straight Grinders. Air-Powered Straight Grinders for Wheels and Cones, Style A.
    Image of Product. Front orientation. Straight Grinders. Air-Powered Straight Grinders for Wheels and Cones, Style B.

    Style A

    Style B

    Use these grinders with straight (Type 1) grinding wheels. They are smaller and lighter than our Electric Straight Grinders.
    Grinders have a lever lock to prevent accidental start-up.
    Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    Style B—Style B has a regulator that maintains constant speed when grinding.
    Inlet
    Speed
    Control
    Style
    For Wheel
    Dia.
    Max. Rotation
    Speed, rpm
    Power,
    hp
    For Arbor Hole
    Thread Size
    Airflow @ Pressure
    Exhaust
    Location
    Thread
    Type
    Pipe
    Size
    For Hose
    ID
    Type
    Switch
    Type
    Overall
    Lg.
    Wt.,
    lb.
    Each
    A3"18,00013/8"-24
    14 ft³/min @ 90 psiBackNPT
    3/8
    3/8"VariableLever13 3/8"3 1/445405A120000000
    B3"12,00013/8"-24
    38 ft³/min @ 90 psiBackNPT
    3/8
    3/8"VariableLever14 1/4"445405A61000000
    B4"12,00013/8"-24
    38 ft³/min @ 90 psiBackNPT
    3/8
    3/8"VariableLever8 5/8"2 3/445405A62000000

    Portable Vertical Grinders for Wheels

    Image of Product. Front orientation. Vertical Grinders. Portable Vertical Grinders for Wheels.
    Image of Specification. Front orientation. For Straight-Cup Grinding Wheel.
    Image of Specification. Front orientation. For Flared Cup Grinding Wheel.
    Image of Specification. Front orientation. For Raised Hub Grinding Wheel.

    For

    Straight-Cup

    Grinding

    Wheel

    For

    Flared

    Cup

    Grinding

    Wheel

    For

    Raised

    Hub

    Grinding

    Wheel

    With more power than angle grinders, these vertical grinders quickly remove large amounts of stock, rust, scale, and other materials. They’re also heavier than angle grinders, so they reduce fatigue when working on a bench. They’re good for heavy duty applications in foundries and shipyards. The threaded spindles accept grinding wheels. These grinders have a lever lock to prevent accidental start-up.
    Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    For Type 6 Grinding Wheels and For Type 11 Grinding Wheels—Often used for heavy removal in grinding and snagging operations.
    For
    Grinding Wheel
    Inlet
    Speed
    Control
    Shape
    Designation
    For Wheel
    Dia.
    Max. Rotation
    Speed, rpm
    Power,
    hp
    For Arbor Hole
    Thread Size
    Airflow @ Pressure
    Exhaust
    Location
    Thread
    Type
    Pipe
    Size
    For Hose
    ID
    Type
    Switch
    Type
    Overall
    Lg.
    Wt.,
    lb.
    Each
    Straight Cup
    Flared Cup
    Type 6
    Type 11
    6"6,00055/8"-11
    53.5 ft³/min @ 90 psiSideNPT
    1/2
    1/2"FixedLever8 3/4"12 1/44761N12000000000
    Raised HubType 277"8,00055/8"-11
    53.5 ft³/min @ 90 psiSideNPT
    1/2
    1/2"FixedLever8 3/8"11 1/44761N1100000000

    Pedestal Grinders

    Image of Product. Front orientation. Bench and Pedestal Grinders. Pedestal Grinders.
    Pedestal grinders let you mount your grinder to work at a comfortable height.
    Grinders have overload-protected manual starters.
    Pedestal
    Base
    Power,
    hp
    Max. Rotation
    Speed, rpm
    Voltage
    Electrical
    Phase
    Wired for
    Voltage, V AC
    For Wheel
    Dia.
    For Wheel
    Thk.
    For Arbor
    Hole Dia.
    Switch
    Type
    Speed Control
    Type
    Vent
    Dia.
    Material
    Material
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Certification
    Specs. Met
    Each
    21,800120V AC/240V ACSingle12012"2"1 1/4"ToggleFixed4"SteelIron30"20"17"470OSHA Compliant 29 CFR 1910.215
    4606A41000000000
    21,800208V AC to 230V AC/460V ACThree24012"2"1 1/4"ToggleFixed4"SteelIron30"20"17"470CSA Certified
    OSHA Compliant 29 CFR 1910.215
    4606A5100000000
    31,800208V AC to 230V AC/460V ACThree24012"2"1 1/4"ToggleFixed4"SteelIron30"20"17"470CSA Certified
    OSHA Compliant 29 CFR 1910.215
    4606A6100000000
    Accessories and Replacements for Bench and Pedestal Grinders
    Replacement Water Pot4603A8 Each 0000000
    Dust Collector4578A54 Each 00000000
    Replacement 60-Watt Bulb for Lighted Eye Shields1796N16 Pkg. of 4 00000
    Replacement Lighted Eye Shield4604A2 Each 000000
    Replacement Tool Rest Support for 12" Pedestal Grinders4606A601 Each 00000
    Replacement Tool Rest for 12" Pedestal Grinders4606A464 Each 000000

    Heavy Duty Bench Grinders with Wire Brush

    Image of Product. Grinder with Wire Brush. Front orientation. Bench and Pedestal Grinders. Heavy Duty Bench Grinders with Wire Brush.

    Grinder with Wire Brush

    In addition to bench grinding and tool sharpening, this grinder has a wire brush for buffing, polishing, and removing rust and scale.
    Grinder has long-lasting lubricated ball bearings that are good for continuous use.
    Caution: Only use accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    120V AC/240V AC—The 120/240-volt models are wired for 120-volt service.
    For Wheel
    Dia.
    Max. Rotation
    Speed, rpm
    Power,
    hp
    For Arbor
    Hole Dia.
    Voltage
    Electrical
    Connection
    Electrical
    Phase
    Switch
    Type
    Wheel
    Thk.
    Vent
    Dia.
    Material
    Motor Enclosure
    Type
    Wt.,
    lb.
    Includes
    Each
    Fixed Speed
     
    UL Listed, OSHA Compliant 29 CFR 1910.215
    7"3,6001/25/8"120V AC/240V ACPlugSingleToggle1"3"IronTotally Enclosed6836-grit Grinding Wheel, 0.014" Wire Wheel Brush, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers4600A2000000000
    8"3,6003/43/4"120V AC/240V ACPlugSingleToggle1"3"IronTotally Enclosed9736-grit Grinding Wheel, 0.014" Wire Wheel Brush, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers4600A300000000
     
    Accessories and Replacements for Bench and Pedestal Grinders
    Each
    1 ½-pint Water Pot with Swivel Arm and Mounting Bracket4366A12000000
    Replacement Tool Rest for 7" Grinders4601A6200000
    Replacement Tool Rest for 8" and 10" Grinders4601A6400000
    Replacement Tool Rest Support for 7" Bench Grinders4601A28600000
    Replacement Tool Rest Support for 8" Bench Grinders4601A40600000

    Handheld Dressing Sticks for Grinding Wheels

    Image of Product. Front orientation. Grinding Wheel Dressers. Handheld Dressing Sticks for Grinding Wheels.
    Also known as cleaning sticks, these can be used to sharpen a variety of abrasive wheels.
    Aluminum Oxide Abrasive—Aluminum oxide sticks are often used on diamond and CBN wheels.
    Silicon Carbide Abrasive—Silicon carbide sticks are sharper than aluminum oxide sticks.
    Boron Nitride Abrasive—Boron nitride sticks are harder and last longer than aluminum oxide and silicon carbide sticks.
    Grinding Wheel Dressing Sticks
    Grinding Wheel
    Dresser Holders
    For Use On
    Grit
    Shape
    Ht.
    Wd.
    Dia.
    Lg.
    Each
    Each
    Aluminum Oxide Abrasive
    CBN Wheels, Diamond Wheels150Square1"1"6"4563A14000004387A71000000
    CBN Wheels, Diamond Wheels220Square1"1"6"4563A16000004387A7100000
     
    Silicon Carbide Abrasive
    Vitrified Bond Wheels24Square1"1"6"4520A200004387A7100000
    Vitrified Bond Wheels46Round1/2"6"5246A12000005246A2200000
    Metal Bond Diamond Wheels80Square1"1"6"4460A16000004387A7100000
    Metal Bond Diamond Wheels150Square1"1"6"4460A17000004387A7100000
    Metal Bond Diamond Wheels220Square1"1"6"4460A18000004387A7100000
    Metal Bond Diamond Wheels320Square1"1"6"4460A19000004387A7100000
     
    Boron Nitride Abrasive
    Vitrified Bond Wheels1000Rectangle1/2"1/4"3"43645A21000000———0
     

    Handheld Truing Sticks for Grinding Wheels

    Image of Product. Front orientation. Grinding Wheel Truing Tools. Handheld Truing Sticks for Grinding Wheels.
    Reshape worn grinding wheels so they’ll continue to run straight by holding these truing sticks against the wheels as they turn. Truing sticks are commonly used before dressing sticks, which sharpen the wheels.
    Dia.
    Lg.
    For Use
    On
    Each
    1/4"1 3/4"CBN Wheels4813N11000000
    3/8"1 3/4"CBN Wheels4813N1200000
    back to top