Diameter Diameter | Show |
---|
|
Diameter Diameter | Hide |
---|
Arbor Hole Arbor Hole |
---|
|
For Use On For Use On |
---|
|
|
For Use With For Use With |
---|
|
Abrasive Material Abrasive Material |
---|
|
Maximum Speed Maximum Speed |
---|
|
Arbor Hole Shape Arbor Hole Shape |
---|
![]() | Round |
Abrasive Bond Material Abrasive Bond Material |
---|
|
Surface Texture Surface Texture |
---|
|
Norton Number Norton Number |
---|
|
|
Mount Type Mount Type |
---|
|
Form Form |
---|
![]() | Disc |
Disc Shape Disc Shape |
---|
![]() | Flat |
More
Use these wheels for light grinding, deburring, and sharpening.
Wheels include one of each reducer bushing listed. The smallest bushing size shown is the smallest allowed for that size wheel.
Wheels for steel and stainless steel are aluminum oxide, which is the most common abrasive used in grinding metal.
Wheels for aluminum, brass, and bronze are silicon carbide, which cuts through soft metals without generating much heat or causing material buildup.
Wheel | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Thick. | Arbor Hole Size | Reducer Bushing Sizes Included | Max. Speed, rpm | Abrasive Material | Abrasive Bond Material | Type | Shape | Color | Choose a Grit (Surface Texture) | Each | |
For Steel, Stainless Steel | ||||||||||||
Unthreaded Arbor Hole | ||||||||||||
14" | 2" | 1 1/2" | 1", 1 1/4" | 1,637 | Aluminum Oxide | Vitrified Clay | Type 1 | Straight | Gray | 00000000 | 0000000 | |
For Aluminum, Brass, Bronze | ||||||||||||
Unthreaded Arbor Hole | ||||||||||||
14" | 2" | 1 1/2" | 1", 1 1/4" | 1,637 | Silicon Carbide | Vitrified Clay | Type 1 | Straight | Green | 00000000 | 000000 |
Designed to stand up to heavy use, these wheels remove more material than our General Purpose Grinding Wheels.
Wheels are for grinding, deburring, and sharpening. They include one of each reducer bushing listed. The smallest bushing size shown is the smallest allowed for that size wheel.
Wheels for steel and stainless steel are aluminum oxide, which is the most common abrasive used in grinding metal.
Wheels for aluminum, brass, and bronze are silicon carbide, which cuts through soft metals without generating much heat or causing material buildup.
Wheel | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Thick. | Arbor Hole Size | Reducer Bushing Sizes Included | Max. Speed, rpm | Abrasive Material | Abrasive Bond Material | Type | Shape | Color | Choose a Grit (Surface Texture) | Each | |
For Steel, Stainless Steel | ||||||||||||
Unthreaded Arbor Hole | ||||||||||||
14" | 2" | 1 1/2" | 1", 1 1/4" | 2,320 | Aluminum Oxide | Vitrified Clay | Type 1 | Straight | Brown | 000000000 | 0000000 | |
For Aluminum, Brass, Bronze | ||||||||||||
Unthreaded Arbor Hole | ||||||||||||
14" | 2" | 1 1/2" | 1", 1 1/4" | 2,320 | Silicon Carbide | Vitrified Clay | Type 1 | Straight | Green | 000000000 | 000000 |
Use these wheels for precision grinding on surface, cylindrical, and tool and cutter grinders. They are also known as Type 1 wheels and straight wheels.
Truing and cleaning before first use is recommended.
32A purple wheels are for medium to heavy material removal. They are aluminum oxide.
Wheel | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Thick. | Arbor Hole Size | Max. Speed, rpm | Abrasive Material | Abrasive Bond Material | Type | Shape | Choose a Grit (Surface Texture) | Choose a Norton Abrasive Grade | Each | |
32A Purple—VBE Bond | |||||||||||
For Steel, Stainless Steel | |||||||||||
14" | 1" | 5" | 1,800 | Aluminum Oxide | Vitrified Clay | Type 1 | Straight | 000000000 | 0000000 | ||
14" | 1 1/2" | 5" | 1,800 | Aluminum Oxide | Vitrified Clay | Type 1 | Straight | 000000000 | 000000 | ||
14" | 2" | 5" | 1,800 | Aluminum Oxide | Vitrified Clay | Type 1 | Straight | 46 (Rough) | 000000000 | 000000 |
A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.
Truing and cleaning before first use is recommended.
5SG blue wheels are for heavy material removal. They are ceramic aluminum oxide, which lasts up to five times as long as Norton 32A General Purpose Grinding Wheels.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Wheel | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Thick. | Arbor Hole Size | Max. Speed, rpm | Abrasive Material | Abrasive Bond Material | Type | Shape | Choose a Grit (Surface Texture) | Norton Abrasive Grade | Each | |
5SG Blue—VS Bond | |||||||||||
For Steel, Stainless Steel | |||||||||||
14" | 1" | 3" | 1,800 | Ceramic Alumina | Vitrified Clay | Type 1 | Straight | 46 (Rough) | I | 00000000 | 0000000 |
14" | 1 1/2" | 5" | 1,800 | Ceramic Alumina | Vitrified Clay | Type 1 | Straight | 60 (Rough) | I | 00000000 | 000000 |
For Steel, Stainless Steel, Iron | |||||||||||
14" | 1" | 5" | 1,800 | Ceramic Alumina | Vitrified Clay | Type 1 | Straight | J | 000000000 | 000000 |
The special shapes of these wheels provide more clearance than typical straight wheels.
32A purple wheels are for medium to heavy material removal. They are aluminum oxide.
5SG blue wheels are for heavy material removal. They are ceramic aluminum oxide, which lasts up to five times as long as 32A wheels.
Wheel | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Thick. | Arbor Hole Size | Max. Speed, rpm | Abrasive Material | Abrasive Bond Material | Type | Shape | Grit (Surface Texture) | Norton Abrasive Grade | Each | |
32A Purple—VBE Bond | |||||||||||
For Steel | |||||||||||
14" | 1 1/2" | 5" | 1,800 | Aluminum Oxide | Vitrified Clay | Type 5 | Recessed | 46 (Rough) | I | 00000000 | 0000000 |
5SG Blue—VS Bond | |||||||||||
For Steel | |||||||||||
14" | 1 1/2" | 5" | 1,800 | Ceramic Alumina | Vitrified Clay | Type 5 | Recessed | 46 (Rough) | I | 000000000 | 000000 |
The porous bond leaves more space between abrasive grains so heavy amounts of chips and coolant easily flow through.
5SG blue wheels are for heavy material removal. They are ceramic aluminum oxide, which lasts up to five times as long as 32A wheels.
Wheel | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Thick. | Arbor Hole Size | Max. Speed, rpm | Abrasive Material | Abrasive Bond Material | Type | Shape | Grit (Surface Texture) | Norton Abrasive Grade | Each | |
5SG Blue—VSP Bond | |||||||||||
For Steel | |||||||||||
14" | 1 1/2" | 5" | 1,800 | Ceramic Alumina | Vitrified Clay | Type 1 | Straight | 46 (Rough) | G | 000000000 | 0000000 |
Press onto a compatible sanding tool or backup pad (sold separately); peel off to remove. Also known as PSA discs. To maintain strong adhesion, clean the pad surface with mild alcohol before applying. Do not use aggressive cleaning solvents such as MEK or acetone, which can damage the adhesive.
Dia. | Abrasive Material | Sanding Properties | For Use On | For Use With | Choose a Grit | Pkg. Qty. | Pkg. | |
Cloth Abrasive Backing | ||||||||
---|---|---|---|---|---|---|---|---|
For Rough Finish | ||||||||
14" | Zirconia Alumina | Tear Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Stationary Disc Sanders | 1 | 000000000 | 00000 | |
For Smooth Finish | ||||||||
14" | Zirconia Alumina | Tear Resistant | Stainless Steel, Titanium, Steel, Iron, Nickel | Stationary Disc Sanders | 120 | 1 | 00000000 | 0000 |
These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
14" Dia. | ||||||||||
3/32" | 1" | 4,365 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 00000 |
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. Wheels are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
14" Dia. | ||||||||||
7/64" | 1" | 4,365 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 0000000 | 000000 |
Make fast, burr-free cuts in stainless steel with these premium aluminum oxide wheels. They’re reinforced with a layer of fiberglass mesh. Wheels are not for use on hand-held saws. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when cutting aluminum, iron, stainless steel, and steel. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
14" Dia. | ||||||||||
1/8" | 1" | 4,365 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 000000 |
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
14" Dia. | ||||||||||
1/8" | 1" | 4,365 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 30 | 0000000 | 000000 |
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
14" Dia. | ||||||||||
1/8" | 1" | 5,400 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 000000 |
1/8" | 20 mm | 5,460 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 00000 |
These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile cast iron. They are reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Use these wheels to cut through metal such as iron and steel. They are reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
14" Dia. | ||||||||||
1/8" | 1" | 5,400 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Iron, Steel | 60 | 0000000 | 000000 |
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels are silicon carbide that is reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
14" Dia. | ||||||||||
5/32" | 1", 20 mm | 5,400 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 000000 |