We will reply to your message within an hour.
More
Almost as hard as diamond, these tungsten carbide bits cut through nonmetals without generating heat.
Best for grinding composites, fiberglass, plaster, plastic, rubber, and wood without generating heat, these sets include a selection of our most popular tungsten carbide bits.
Swap accessories quickly and safely without tools.
With more flaps than standard discs, these last 30-40% longer.
Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.
These discs have a harder abrasive than standard flap sanding discs.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating more consistent finishes.
A heavy duty backing plate provides more support than standard discs for heavy material removal.
The flaps alternate between an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.
The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.
These discs have a harder abrasive than standard flap sanding discs for corners.
Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.
A special fastener on the back of these discs allows you to easily swap one disc for another.
The premium abrasive stays sharp longer.
These discs have a harder abrasive than standard quick-change discs.
The heavy duty construction provides more support than standard discs for heavy material removal.
These discs have a harder abrasive than standard flexible-edge quick-change discs.
The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.
Debur, clean, and blend faster than other nylon mesh discs.
The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.
Thicker, more pliable, and less aggressive than standard nylon mesh quick-change discs, use these for finer sanding on curved surfaces.
Fit these discs over your tool's arbor.
A coating prevents dust and debris from building up on the abrasive surface.
Holes in the disc let you see the surface you’re sanding.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Press onto a compatible sanding tool or backup pad; peel off to remove.
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Holes allow dust removal when used with a vacuum sander.
The thick, abrasive-embedded nylon mesh construction gives you maximum control over sanding pressure.
These discs are abrasive-embedded cloth with a cushioned layer.
Made of foam, these discs can conform to contoured shapes, corners, and sharp edges.
Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.
The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.
The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.
Secure the shank into the collet or chuck of your tool.
Use with commercial floor buffing machines to sand wood floors and strip tape from concrete.
Use these discs with commercial floor buffing machines to sand wood floors.
Pointed teeth cut wood and rubber quickly without clogging.
Use these wheels for cutting soft metal, plastic, stone, and wood.