Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.

Use these wheels for precision grinding on surface, cylindrical, and tool and cutter grinders. They are also known as Type 1 wheels and straight wheels.

The special shapes of these wheels provide more clearance than typical straight wheels.

A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits.

Also known as dressing sticks, these can be used to sharpen a variety of abrasive wheels.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

The backing plate on these discs can be sheared away as the abrasive flaps wear down, allowing you to use more of the disc rather than replacing with a new one.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

With more flaps than standard discs, these last 30-40% longer.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

Set at an angle and widely spaced, the flaps reach into corners.

With more flaps than standard discs, these last 30-40% longer.

Set at an angle and widely spaced, the flaps reach into corners.

The premium abrasive stays sharp longer.

The heavy duty construction provides more support than standard discs for heavy material removal.

These discs have a harder abrasive than standard flexible-edge quick-change discs.

The premium abrasive stays sharp longer.

The heavy duty construction provides more support than standard discs for heavy material removal.

The premium abrasive stays sharp longer.

Holes in the disc let you see the surface you’re sanding.

Fit these discs over your tool’s arbor to sand stainless steel and hard metals.

A coating prevents dust and debris from building up on the abrasive surface.

Fit these discs over your tool’s arbor to sand aluminum, soft metals, and nonmetals.

A coating prevents dust and debris from building up on the abrasive surface.

Holes allow dust removal when used with a vacuum sander.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

The premium abrasive lasts longer as well as cuts faster and produces a more consistent finish than standard hook and loop discs.

Use these discs with commercial floor buffing machines to sand wood floors.