We will reply to your message within an hour.
Connect these magnetic grippers to an air system to lift odd-shaped and perforated metal parts that often cause traditional vacuum cups to lose hold.
Stick these adapters onto Non-Contact Vacuum Lifters to create a soft area for your workpiece to touch while it’s in motion.
Connect these fittings to a vacuum cup and compressed air source to create a vacuum generating system.
Use sensors, vacuum lifter mounts, and robot adapter plates to add functionality or replace worn cups, pads, and other parts to extend the life of your vacuum lifters.
Connect these lifters to your robot arm to pick up and move items using suction. They're electric, so you don't need a compressed air source.
Use these cups with a vacuum system to grip, lift, and move flat materials, such as sheet metal and plastic.
The bellows on these cups handle items with varied heights and angles better than flat cups.
Thread these cups onto your vacuum system to lift and move sanitary items with curves, corners, and uneven surfaces.
Attach these cups to threaded connections on your vacuum system to gently lift bags, plastic film, and other sanitary wrappings.
These cups maintain their grip even as contents shift and the bag changes shape during lifting.
Connect these pads to your vacuum system to lift and move textured items that standard vacuum cups can’t pick up.
Drain static charges from electronics and other sensitive, textured items as you lift and move them with your vacuum system.
Also known as spring plungers, these fittings are spring-loaded to accommodate items with variable heights.
Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.
Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.
Designed for temporary mounting on smooth, nonporous surfaces, vacuum holders are easy to remove and reposition.
The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing from your bench top or drawer.
Store sockets on posts marked with the size.
Wrap the split gland of these grips around ethernet cables with an RJ45 connector or other already installed cables for a water-resistant seal with your enclosure.
Secure cords installed through enclosures and panels in wet environments while protecting them against sharp bends. With a flared end that keeps cords from bending without limiting too much motion, these grips extend cord life.
Vent air from your enclosure to equalize pressure and stop condensation from forming inside while securing cords in wet environments. These polyamide grips are lightweight and resist rusting.
A rubber bushing with an oval slot resists water and provides entry for building cable, which is also known as Romex type NM-B or type UF-B cable.
Able to withstand temperatures up to 300° F, these grips are also corrosion- and chemical-resistant.
Extend your cord’s life while stopping it from coming loose in places that are sanitized with water or steam as hot as 300° F, such as food plants and clean rooms.
Tighten the screw-down clamp for superior pull-out resistance.
These grips are the most corrosion resistant of any of our submersible metal cord grips.
Suitable for use in applications where cords are underwater—these grips are rated IP68 for protection from prolonged submersion.
Keep cords from coming loose and seal water out of enclosures in extremely cold labs and storage areas. Thanks to their plastic bushing and rubber O-ring, these grips withstand temperatures as low as -75° F.
Secure cable installed through enclosures in wet environments while venting air to protect electronics from condensation.
These cord grips are lightweight yet durable.
These grips are nickel-plated brass for good corrosion resistance.
Stainless steel construction offers the most corrosion-resistance of any of our multi-diameter wet-location cord grips.
Attach a cord grip to cable without removing connectors and rewiring. These cord grips have a two-piece design to fit around cables with connectors.
The face of these grips is flush with the cable-entry point for a seamless appearance.
Modify these cord grips to get the right fit for your cord even when you don't know the exact diameter.
Adapt metric, NPT, and PG conduit and cord grip threads to match knockout threads.