Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance.

Stronger than aluminum cord grips, these steel grips are zinc plated for corrosion resistance. They have a steel locknut and metal-reinforced O-ring that prevents liquid from entering the connection.

Peel away layers of rubber inserts to fit around cord grips, even when you don't know the exact diameter.

The loops tighten by the weight of your cable or by manual adjustment. These grips are often wrapped around a beam or pipe.

Each set includes six grips for pulling one or more cables through conduit.

Clamp down on nonreinforced hose and tube to squeeze it shut, eliminating the need to drain the hose when working on pumps, heating and cooling systems, and fuel lines. Squeeze the handles to lock the jaws and these pliers stay in place.

Lock the jaws in a vise-like grip around a workpiece and these pliers stay clamped in place to leave your hands free.

Hold larger workpieces than standard locking pliers. These tools lock in a vise-like grip around a workpiece and stay clamped in place.

When there isn't clearance to use standard-grip locking pliers, the angled handle on these tools gives you access. Lock the jaws around a workpiece and these pliers stay clamped in place.

Curved jaws grip bolt heads and nuts with rounded corners. These pliers lock in a vise-like grip and stay clamped in place, leaving your hands free.

Change out worn or broken springs in the handle of your locking pliers.

Insulated grips protect against accidental contact with live electrical circuits. These assorted pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Sets contain an assortment of pliers styles. These tools are steel.

You don't have to move the pivot point on these pliers—squeeze the handle and the jaws adjust to fit your workpiece.

Choose these tools when you need the gripping power of a pipe wrench with the adjustability of pliers. Slide the pivot point of the jaws to a range of positions.

You don't have to move the pivot point on these pliers—squeeze the handles and the jaws adjust to fit your workpiece.

More jaw positions than standard adjustable pliers enable fine adjustment and a firm grip. Push and hold the button to adjust the jaws, and then release the button to lock them in place.

Move the curved jaws to 15 positions for fine adjustment. These pliers have a bottom jaw that is shorter than the top for a firm grip on the flats of bolt heads and nuts that have rounded corners.

Avoid damaging workpieces without sacrificing gripping power and adjustability.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height.

Extra-long handles enable access to hard-to-reach areas. These pliers are shaped to reach around closely spaced components and other obstructions.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900. They are shaped to reach around closely spaced components and other obstructions.

Get the best possible grip on round objects, such as oil filters, connectors, and PVC pipe. Also known as cannon plug pliers, all of these pliers have curved jaws.

Two curved openings on the jaws grip multiple sizes of round stock, tubing, and pipe.

Additional features, such as wire terminal crimpers and wire stripping holes, enable you to perform a variety of electrical wiring and installation work with a single tool.

Tips almost twice as wide as those of standard long-nose pliers give you a better grip on your work. These are also known as duckbill and flat-nose pliers.

Extra-long handles enable access in hard-to-reach areas.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Colorful plastic grips make these tools stand out, so they're less likely to be misplaced.

Pull stripped, rusted, and tamper-resistant screws out of hard-to-reach places.

The narrow jaws fit into tight spaces, and the slip joint allows you to switch between two different jaw opening sizes.

Adjust the pivot point to switch between two different jaw opening sizes.

The grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

When there isn't clearance to use standard-grip pliers, the angled head on these tools gives you access. Also known as lineman’s and combination pliers, use them to pull, bend, and cut wire.

Extra-long handles enable access to hard-to-reach areas. Also known as lineman’s and combination pliers, use these tools to pull, bend, and cut wire.

Additional features, such as wire terminal crimpers, enable you to perform a variety of electrical wiring and installation work with a single tool. Also known as lineman’s pliers, use them to pull, bend, and cut wire.

Smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. Also known as miniature and electronics pliers, they have a round nose for looping and bending wire.

An LED lights the tips for picking up and positioning in dark areas.

These general purpose tweezers grip a variety of objects.

Sets include an assortment of tweezers used to remove chips and other delicate components from circuit boards.

Get a firm grip on beakers and other containers in the curved jaws. You can also use the tips of these tongs to pick up small objects.

Maintain a secure hold on uneven or irregularly shaped parts by clamping against these serrated grippers.

Clamp against these grippers for a secure hold on workpiece edges.

Bend the shaft to reach into awkward spaces and grab small parts in the wire jaws.

An extra-long shaft enables access to material in hard-to-reach areas. These retrievers can pick up heavier objects than our other magnetic retrievers.

Push the plunger to engage the magnet; release to disengage. These retrievers bend into position and stay in place.

Sets include a handle and an assortment of tips for holding and positioning wire, springs, and other small parts.

The handle has a magnet at the end to pick up small steel objects. Use these picks to hold and position wire, springs, and other small parts.

The assorted tools in these sets are used to hold, separate, and position wire, springs, and other small parts.

Use these tools to hold, separate, and position wire, springs, and other small parts.

Hold, separate, and position small parts with one tool. These sets include assorted picks with a different tip at each end.

An insulated handle protects against accidental contact with live electrical circuits. These picks are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Use the assorted tools in these sets to pull material out of tight spots. The corkscrew tips twist into material for a firm hold while the handle provides the necessary leverage for pulling.

Sets include an assortment of handles and tips for pulling material out of tight spots. Replace tips when they become worn or to use a different style.

Also known as spring plungers, these fittings are spring-loaded to accommodate items with variable heights.

Lift metal plates by hand by gripping the edge.

These finger blanks come ready to mount to SMC or Schunk grippers, so you can make custom fingers without starting from scratch. Just machine the blank’s gripping end to create fingers that will securely grip your specific parts.

Pads on these clamps prevent the grip from biting into the load.

Use these clamps to raise a metal plate straight up from its original vertical position.

Clamps can take a metal plate that is stacked horizontally and tilt it up 90° to lift vertically. After lifting, clamps can place the plate back down in the original position (plate can not be flipped over).

Store tools such as brooms, cordless drills, screwdrivers, and flashlights.

With threads on one end, holders can easily be screwed into a wall.

Store tools such as pliers, screwdrivers, and hammers.

These tools lock onto your material to prevent them from opening while bending and crimping.

Rounded jaws reduce damage to aluminum and other lightweight metal.