Save time covering corners—these seals come formed to a corner, so they don't require bending or cutting. Made of Buna-N foam, these seals resist oil, grease, salts, water, and most detergents. The foam has a closed-cell construction, so it resists absorption.

Use straight seals (sold separately) to fill in gaps along edges if the corner seal isn’t long enough for your application.

For technical drawings and 3-D models, click on a part number.

Quickly seal corners without needing to bend, cut, or piece straight seals together. All of these seals are made of EPDM foam to resist water, sunlight, and ozone.

Use the straight seals (sold separately) to fill in gaps along edges if the corner seals aren't long enough for your application.

For technical drawings and 3-D models, click on a part number.

The Buna-N foam rubber bulb on these seals resists oil, grease, salts, water, steam, and most detergents. The bulb is hollow for compressibility and the foam has closed-cell construction, which resists absorption. Push seals onto a door’s edge to stop wind, dust, and water from entering. The gripping edges have fingers for a strong hold.

For technical drawings and 3-D models, click on a part number.

Already formed to 90°, these seals save you time and effort because you don’t have to cut and adhere straight pieces together to cover a corner. They’re made of Buna-N foam, so they resist oil, grease, salts, water, and most detergents.

Use the straight seals to fill in gaps along edges if the corner seals aren't long enough for your application.

For technical drawings and 3-D models, click on a part number.

Made of fluorosilicone rubber, these seals withstand high temperatures like standard silicone without breaking down when exposed to fuel and oil.

For technical drawings and 3-D models, click on a part number.

In addition to oil, these seals resist grease, salts, water, steam, and most detergents.

For technical drawings and 3-D models, click on a part number.

Use these Viton® fluoroelastomer rubber seals with fuels and aggressive chemicals, such as petroleum oil, hydrofluoric acid, and propyl alcohol. They have hollow construction for compressibility. Attach them directly to a door’s surface to shield against dust, noise, and vibration.

For technical drawings and 3-D models, click on a part number.

To stand up to oil, grease, salts, water, and most detergents, these seals are made of Buna-N rubber. They have a hollow construction, so they’re more compressible than solid seals.

For technical drawings and 3-D models, click on a part number.

Made of Viton® fluoroelastomer rubber, these seals stand up to fuels and aggressive chemicals, such as petroleum oil, hydrofluoric acid, and propyl alcohol. They have hollow construction for compressibility and a flange that can be positioned along a door’s edge to cover gaps and block dust, noise, and vibration.

For technical drawings and 3-D models, click on a part number.

Made of Buna-N rubber, these seals resist oil, grease, salts, water, steam, and most detergents. They have a hollow construction, so they’re more compressible than solid seals.

For technical drawings and 3-D models, click on a part number.