Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas. Made of silicone, these grommets have a wide temperature range, resist washdown chemicals and cleaners, and are FDA compliant for direct contact with food. They’re also flexible, so hydraulic pressure surges, pipe expansion, and cord flexing won’t break their seal or damage them. No caulk or sealant is needed to install these grommets because their ridges form a strong seal that keeps out dust, debris, and moisture. The ridges also act as guidelines for trimming the center of these grommets to size; they’re sized to standard tube diameters.

To mount the flanges of these grommets, use their drilled holes. Flanges are 316 stainless steel to resist corrosion from washdowns with harsh cleaners and sanitizers.

Style 1 grommets work on tubing that isn’t installed yet.

Style 2 grommets have a split design to wrap over tubing that’s already in place. For a secure seal, crimp the included metal staples over the seal using pliers.

For technical drawings and 3-D models, click on a part number.

This trim withstands temperatures up to 450° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of silicone, it resists abrasion better than plastic trim. Push this trim onto an edge and it grips on three sides for a tight hold. All of this trim is very flexible so it can bend around tight corners. It has a medium hardness rating, which offers a balance of cushioning and impact resistance. It's nonmarking and can be use outdoors.

For technical drawings and 3-D models, click on a part number.

A metal core adds strength and stability, making this trim more durable than other high-temperature rubber trim. It withstands temperatures up to 400° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of silicone, this trim resists abrasion better than plastic trim. Push it onto an edge and it grips on three sides for a tight hold. All of this trim is flexible so it can bend along a gradual curve. It has a hard rating to withstand high levels of impact. It's nonmarking and can be use outdoors.

For technical drawings and 3-D models, click on a part number.

Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Bumpers with a hard and medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.Silicone bumpers withstand a wider range of temperatures. They are nonmarking and can be used outdoors.

These all-rubber silicone seals can withstand temperatures up to 500° F, plus they resist water and salts. Push them onto a door’s edge to stop wind, dust, and water from entering. They have a hollow bulb for compressibility. The gripping edges are smooth, so they lay flat against the surface.

For technical drawings and 3-D models, click on a part number.